Related posts

Feature

Six axis senor MPU600 connects by SPI,Microcontroller controls OSD chip through SPI bus DMS mode and faster speed.
Use remote control to view flight control parameter through OSD, Support BF setting software to flash and debug OSD and SAMRT AUDIO, IRC TARAMP agreement, adjust the VTX frequency and power etc by flight control (will support DYS new VTX)
2-4s lipo input support, with the anti-ignition function TVS device, Six-layer PCB board and 3OZ copper to enhance the over-current and heat dissipation Comes with heat resistance damping ball to upgrade the stability and operation
STM32F405 master with higher refresh rate and more function ports
Dimension:33mm*30mm/Hole distance:20*20mm/Net weight:6g without cable

Description

Basic Functions
Betaflight firmware
"DYS F4 PRO" firmware can be used
STM32F405 master with higher refresh rate and more function ports
Six-layer PCB board and 3OZ copper to enhance the over-current and heat dissipation
Six axis senor MPU600 connected by SPI
Compatible all split-type escs
Microcontroller controls OSD chip through SPI bus DMS mode to make it fast
Support BF setting software to flash and debug OSD
5V power supply max up to 2A
Use remote control to view flight control parameter through OSD
Support SAMRT AUDIO, IRC TARAMP agreement, adjust the VTX frequency and power etc by flight control (will support DYS new VTX)
Comes with heat resistance damping ball to upgrade the stability and operation
2-4s lipo input support, with the anti-ignition function TVS device
Net weight 6g without cable
Dimension L 30mmX W 27mm, hole distance 20X20mm
Caution
Please be attention to below notes to protect your flight control and ensure your flight control stable
Be attention to the polarity, please double check before power on
While pull/plug or connection, please cut off the power
Do not short the 5V or any other power, otherwise the flight control will burn
Damping ball should be installed on the flight control (Already mounted before leaving the factory)
While mount with 4-in-1 esc, please check the plugged pin correct or not, be attention that do not force to pull or plug
The maximum refresh rate of PID and gory up to 8K