Related posts

Feature

Micro USB DC 5V input, four independent charging and micro computer management system
The LED indicators display the charging progress: 25% - 50% - 75% -100% and battery type (size): Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.85V
Refresh for OV battery. It don't charge any battery of 1.65 -1.85V (refresh current can be detected only)
Remove the charger from power source after charging complete, and remove the battery from the charger at the same time
Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

Description

Features
Four charging current mode (500mAh/700mAhn/1000mAh/2000mAh), 2000mAh current mode is fixed only on the fourth slot.
Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.85V li-ion batteries.
Protection for over-charge and over-discharge and short circuit. Identify broken battery and polar reverse inspection.
Charing under constant voltage and current.
Input by DC interface and working voltage is 5V-2A (Micro plug).
Built with 5V/1000mAh USB discharge (output) function.

Description
Input : Micro USB DC 5V/2A.
Output: 1.42V/2V0.05V/3.650.05V/4.350.05V.
Current: 2000mA*1 1000mA*2 700mA*3 500mA*4.
Constant voltage, cut-off current: less than 100mAh.
Standby current: less than 15mAh.
0pen-circuit voltage of USB output : 4.9-5.3V; and the 4th slot is fixed for the USB discharge power source.
Output current: 1000mAh.
Open circuit current: <1mAh.
The corresponding voltage is 4.75-5.25V under 1000mAh current.
Cut-off voltage for discharge protection: 3.00.1V.
Compatible:for Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440
Compatibility: Li-ion/IMR: 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440.

Package included:
1 * Battery Charger for 18650 26650 16340 14500 4 Slot.
1 * Cable.
1 * Manual.