Related posts

Feature

12 inch CCTV TFT LCD Monitor with VGA, AV, TV, HDMI Inputs - US PLUG
12" inch High-definition TFT LCD Monitor with 800*600 Pixels make the image exquisite and the color gorgeous
Support VGA input, connect with PC(800*600) With VGA, AV, TV, HDMI inputs
Works perfectly with car rearview cameras, supports Car DVD, surveillance camera, STB, satellite receiver and other video equipment
12 inch CCTV TFT LCD Monitor with VGA AV TV HDMI Inputs Display

Description

Specification:

Screen Size: 12 inch
Aspect Ratio:4:3
Pixel pitch:0.297
Screen Resolution:800*600
Screen Brightness:250cd/
Screen Contrast: 600:1
View Angle:H-160 degree,V-140 degree
Response Time:8-12ms
Video input: TV/HDMI/VGA/AV/USB
Speaker: YES

Operating Temperature:0-50
Brightness Control: YES
Function: Analog TV
Video System: PAL NTSC,SECAM
.
Power Supply:
-Input:AC100-240V 50-60HZ
-Output:DC 12V
Dimension:320*290*40mm
Weight: 1800g
USB: PHOTO MUSIC MOVIE TEXT
(The USB interface can only be controlled by remote control

Package listing

1x 12 inch CCTV TFT LCD Monitor
1x Power Supply Charger
1x AV Cable
1x Manual
1x Remote Control

Note:The default Input mode is TV,pls choose correct mode you need.
Pls contact us if you have any question.

FAQ:

A.How to enter into menu&change settings?(You can change the setting at any time.)
Step1:Press the menu button,enter into menu interface,press left button or right button(on screen) to choose the one you want to change
Step2:Press the refresh button,you can enter into detail page.
Step3:Press left button or right button to choose the one you want to change.
Step4:When you finish it,press menu button to return to the main interface

B.How to enter mode to suit for your input device
Step1: Please connect your device with the required cable to the right port with device turned off.
Step2:Press the power button and turn on the device.The blue indicator will keep always on.Few seconds,the screen will turn blue and show"no signal",that's normal,please ignore.
Step3:Press the refresh button to enter into mode change interface,Keep press up or down button(on remote) to choose the mode suits for your input device.
Step4:Press enter button to confirm the mode. After the handover is successful, there is a corresponding logo in the upper right corner. such as HDMI,etc.