Enerwave ZB500D ZigBee Dimmer, Smart Dimmer Switch, In-Wall ZigBee Dimmer Switch, Dimmer Switch for LED and CFL, Interchangeable Face Covers

Related posts

Feature

Compatible with SmartThings STH-ETH-200 or older, Orvibo only. ZigBee dimmer enables wireless dimming and control of lights from anywhere using an internet connected device
Works as part of a home automation system for smart lighting control, smart home control, and association scene control
Acts as a signal repeater to boost ZigBee network after network inclusion
Wireless ZigBee technology uses mesh networking to expand network reach and eliminate points of failure; built on 2.4GHz for worldwide use; uses a variety of security mechanisms such as AES-128 encryption, device and network keys, and frame counters
Single-pole; Interchangeable face covers (white comes attached, black, light almond); ZigBee frequency: 2.4GHz, HA 1.2 Certified; 120VAC; 500W Incandescent, 25W Minimum Load; FCC compliant. Device type code is required to work with SmartThings

Description

Experience ZigBee home automation like never before with the ZB500D ZigBee Dimmer Switch by Enerwave! This smart dimmer allows you to remotely dim and control lights from anywhere using an internet-connected device. Easily upgrade your smart lighting control system by adding the ZB500D dimmer switch to your ZigBee network. The ZB500D replaces standard wall switches to allow manual and remote control through your ZigBee network. Not only can you remotely control the ZigBee dimmer, you can create associations or group it with other ZigBee devices as part of a scene for simultaneous control. It is compatible with dimmable type LED and CFL bulbs, incandescent and halogen lights. Enerwave ZigBee dimmer, switch, receptacle, plug-in module and scene control products make your home "smart" with enhanced security and energy efficiency. In a ZigBee network, each device is designed to act as a wireless repeater. This ensures that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Repeaters will retransmit the signal from one device to another until the intended device is reached.

Compatible hubs: SmartThings STH-ETH-200 or older, Orvibo. Device type code is required to work with SmartThings

https://www.lemande.com/ is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, amazon.co.uk, amazon.ca, endless.com, smallparts.com, myhabit.com, and any other website that may be affiliated with Amazon Service LLC Associates Program.