Related posts

Feature

Input: 100-240VAC,50/60Hz,Output: 42V 2A
105 Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum. The precision current between 0.1A, the voltage tolerance is 0.1V, absolutely not virtual marking.
The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
The Charger protected: Short circuit protection/ over current protection/ over voltage protection; red light -- charging, green light -- charge OK, it stop automatically when the battery is full.
Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you

Description

Input Voltage: 100-240V 50/60HZ

Suitable Voltage/Frequency: 90-264V 47/63Hz

Output: 42V 2A

Charge Mode: CC to CV

Efficiency: 80%

Ripple/Noise: <100MV

Battery Number: 10 series

Operating Temp: 0-40C

Storage Temp: -20-85C

Operating Humidity: 5%~90%RH

Storage Humidity li ion battery charger : 5%~90%RH

Socket Standard: XLRM ( 1+ 2-) etc.

Apply to: lithium battery pack

Protections: Short circuit/ Overload/ Over voltage

LED Display: Red: In charging state, Green: Full Charged

Use and maintenance of the charger :

1. When charging, first connector to the battery, then connect to AC; after full, cut off AC,
then pull the battery plug. If you pull the battery plug first while charging, especially when the
charging current is large (red light), it is very easy to damage the charger.

2. LED display after turning green, then charge for 2-3 hours.
3. Please do not run out of battery power, then charger. Otherwise the battery cannot be protected or even damaged.

4. long-term shallow discharge battery, about 3 months, for a deep discharge, is the so-called re-lighting,
which is conducive to the activation of long-term immobile material in the deep part of the battery. Luminous
means that riding the controller battery undervoltage protection action

5. do not use the battery for a long time, you must charge once (2-3 months).

6.Please use the charger in a dry place in time.

7.When you do not use the charger, do not always connect the power supply.

8.Please confirm your battery, Because it is used to charge the lithium battery. Do not use the charger on the
LiFepo4 battery, otherwise the charger will be got incredibly hot.