Related posts
Feature
High-performance ARM CPU; RTC with backup battery; 66KB SRAM for Tibbo BASIC/C variables and data; 1MB flash for TiOS and application code10/100 Base-T Ethernet port with onboard magnets and RJ45 jack; 56 general purpose I/O lines; 8 lines can work as interrupts; 32-bit architechture; Firmware is upgradeable through the serial port or network.
Power through the switching regulator, 12VDC nominal (8 ~ 20V); Using regulated 3.3V power (the regulator is bypassed); The regulator can provide up to 1.3A @ 3.3V to external devices; Power: 100mA @ 3.3V (100Base-T mode, full speed).
4 UARTs support serial, Wiegand, and clock/data streams; Baudrates fo up to 460,800bps; Full-duplex and Half-duplex; Can control a GPRS modem* (such as the SIM900).
4-channel ADC; 4 synchronous serial ports with SPI and I2C modes; Supports a 320x240 TFT LCD*; Square wave output (can be used for buzzer* control); Supports matrix and binary output keypads*.
Description
The EM2001 is a full-featured Tibbo BASIC/C-programmable IoT Board with Ethernet, as well as optional Wi-Fi* and GPRS** connectivity. The EM2001 has four UARTs.
The board is self-sufficient it does not require a host PCB to plug into. The RJ45 jack is mounted directly on the board. The EM2001 also contains a DC-DC regulator that can power the board and has an additional current budget for external hardware.
The device's capabilities are further enhanced by the onboard flash memory hosting a hardened fault-tolerant file system, as well as the EEPROM and RTC with a backup battery.
The EM2001 has 56 general-purpose I/O lines and can control an external LCD, keypad, buzzer, card readers, serial devices, and other circuitry. All I/O lines are accessible through two dual-row connectors with the standard 2.54mm (100mil) pitch.
Here is How You Can Use the EM2001
As a Serial-over-IP (SoI) Device
Serial-over-IP conversion is a large part of what we do, and there is an entire section of our website dedicated to serial converters (a.k.a. "serial device servers"). We offer a free open-source serial-over-IP (SoI) app that turns the EM2001 into a full-featured four-port serial-to-IP converter.
Build Your Own IoT Solution
The EM2001 is programmable in Tibbo BASIC and Tibbo C. Develop your very own IoT solution from scratch or take inspiration from our open-source applications and code samples published in the Code and Apps