Related posts
Feature
Use the excellent heat gun for heat shrink tubing, embossing, shrink wrapping packages, melting and bending plastics and laminates, and softening floor tiles.Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside.
At heat gun tail, the heat vents designed in both sides to reduce the internal temperature and extend the product duration.
Two pin US plug and 1m / 3ft cable, The temp of the nozzle could reach to 200in seconds.
If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Description
Product Specification:- Material: ABS Plastic
- Size: approx. length 22cm, power cable length 100cm
- Weight: approx. 305g / 10.8 ounces
- Working temp.: 200, Maximum temperature: 300
- Power: 300W
- Voltage: 110V-130V
- Type: Constant temp. hot air gun
- Plug Type: US two pin Plug
Noted:
- Do not touch the hot nozzle.
- Keep 5-6cm distance between the heat gun and target items.
- Do not recommend continually use more than 10 minutes to prevent nozzle overheat.
- Please read the operating instructions before use.Thanks.
Product List:
- Heat Gun Tool x1
- Manual (English) x1
Our Services:
- Your Satisfactions are very important to us, Please don't hesitate to contact us if you have any questions. We'll try our best to assist you within 48 hours. Thanks!