Related posts
Feature
Support Forced Power off RestartSupport Connect electricity Automatic Starting up
Abnormal restart, such as dead machine, blue screen, display card and so on
Automatically restart the network (to enter a monitoring site, click "open", the watchdog if unable to access the site will automatically restart)
The monitored program does not respond to or restart the automatic restart (to enter the monitored program name, click "open")
Description
Description:Color: Blue PCB
Material: PCB + electronic components
Interface Type: USB
Product Size: 5.3 * 2 * 1.5CM, line length 52CM
Instructions:
1. Download software and drivers.
2. Install the driver. Do not connect the USB watchdog to your computer before installing the driver. Double-click the watchdog program, click "Install" and wait for the installation to complete.
3. Connect the USB watchdog to the USB port on your computer. Do not connect the cable to the motherboard reset pin for now, because the default timeout is 3 minutes. If the driver installation is not completed within 3 minutes, the USB watchdog may switch to The system sends a restart signal. Wait for the computer to complete the watchdog module automatically identified, the computer will recognize the LED lights.
4. Start the USBWatchdog software and configure it according to your needs. It is suggested that you restart the USBWatchdog software after changing the configuration. When the watchdog software is running normally, the LED on the watchdog mainboard will flash for 1 second and the cable will be connected To the motherboard PWR and RST pins.
5. The software adds the automatic running function (because the system environment and the antivirus software are different, the watchdog if it can't add the boot startup item normally, please add it manually., some antivirus software may prevent the program starts running, click "Allow")
6. If the LED on the control panel is always light, it means the watchdog software is not working normally, the computer has crashed or the operation is not normal, and the watchdog will restart at the set time.
Methods:
2pin PWR connection to the motherboard pin PWR_ON (different motherboard may not the same);
2pin RST RST (different pin to the motherboard motherboard may not the same, the common "RST" "RES" "RESET")
Software download address: