ANNKOO Car Jump Starter Quick Charge IP65 Portable 450A Peak Current (Up to 4.0L Gas or 2.5L Diesel Engine) Phone Power Bank Auto Battery Charger Pack Booster Output, with LED Light, Black/Red

Feature

MULTI-FUNCTION: Compact Jump Starter + Portable Charger + LED Flashlight + S.O.S Lighting Signal + Dual USB Quick Charge+Water resistance IP65.
POWERFULJump start your vehicle in a flash. jump start your vehicle (up to 4.0L Gas or 2.5L diesel or Motorcycle , RV, tractor, light-duty trucks, lawnmower, cargo vans, ATVs, snowmobiles , oil boat, etc) up to 20 times with 450A peak current and heavy duty clamps and cables.
SECURITY ASSURANCEThe intelligent jumper clamps has over current protection, short circuit protection, overload protection, over-voltage protection, over-charge protection with international authoritative organization certification, such as FCC, CE, UN38.3, MSDS.
Power Bank With Quick Charger: With 10000mAh Battery Capacity And Smart USB Charging Ports, This model can be used to charge smartphones,tablets,laptops kindle and other devices at a high speed.
Package: ANNKOO Jump Starter AN01, Intelligent Jump cable, Car adaptor, Micro USB Cable (Support Quick Charge), User Manual, Storage bag. All kits store in a glovebox.

Description

Jump start 12V vehicle Instruction:
1. Connect the blue plug fully seated into the host, and make sure the Cable Indicator is off.
2. Connect Red Clamp to the positive (+) battery terminal, Black Clamp to the negative (-) battery terminal.
3. Operate following the instruction of the Cable.
4. Start the vehicle.
5. When the vehicle is started, remove the jumper cable from the vehicle battery. Leave the vehicle's engine running.

Specifications:
Dimension: 156*80*29mm / 6.1*3.1*1.2 inch
Weight: 390g / 0.85lb
Battery Capacity:10000mAh(29.6Wh)
Output: Dual Quick Charge(5V/2.4A; 9V/2A; 12V/1.5A)
Input: Quick Charge(5V/2.4A; 9V/2A; 12V/1.5A)
Full Charging Time: About 3 hours by 15V 1A; 4 hours by 5V 2A
Start Current: 200A
Peak Current:450A
Operating Temperature: -20~60

Warning:
1. Jump for 12V vehicles only, it would be hazard if for other jumping.
2. DO NOT use this unit if any cable clamp or cord is damaged.
3. DO NOT use in place of a vehicle battery.
4. DO NOT use as a battery charger.
5. Never remain the unit on car battery after cranking the car success.
6. Use the jumper cable provided with this unit only.
7. Make sure the BLUE plug of the jumper Cable is plugged fully into jumping socket; otherwise, the blue plug would be melted.
8. Make sure to check all the battery connections are CLEAN before Jump Starting!
9. Do NOT Jump Start more than 3 times in a row.
10. Do NOT expose product to extreme heat or fire.