Related posts
Feature
Module name : 100W voltage step up constant current module;Module properties : Non-isolation step up module(BOOST);Input voltage : 3-35V input (Maximum 36V); Input current :10A(MAX) Please strengthen heatsink when more than 6A;Output voltage: 3-35V continuously adjustable ( Default output 19V)Output current : 6A MAX Please strengthen heatsink when more than 5A ( It is related to input ,output voltage difference. The more output voltage difference ,the less output current ); *Constant current range :0.1-10A; *Output power : = Input voltage*6A ,such as : input 3.8V*6A=22.8W,5V*6A=30W, 12V*6A=72Winput 24V*6A=144W;
Working temperature : -40+85 degree ( Please strengthen heatsink when temperature is too high); *Working frequency : 280KHz; *Conversion efficiency : Max 96% ( Frequency is related to input, output voltage ,current and voltage difference );
Over current protection : Yes Input more than 12A , automatically reduce output voltage ,it will be a little error occurred; *Short-circuit protection : Yes (Input 15A fuse ) double short circuit protection , for safety use.; *Input reverse connection protection : No. ( Please input series-in diode if necessary );
Output prevent backflow: Yes, no need to add prevent backflow diode for charging.; *Identification of resistance : CP ,ipad ,iphone (Some mobiles have different identify circuit which needs adjusting ); *The minimum resolution of voltmeter : 0.05V/0.05A(automatically switch decimal when less than 10V); *Installation : 4*3mm screws; *Connection : Non-welding output terminal; *Size : (L)60*(W)50*(H)20mm *Weight : 47g;
Description
*DIY a static power ,just need to input 12V ,and output 12-35V adjustable , with voltage ,current display .It can be totally broken away from multimeter .*Power suppler for your electronic equipments ,and set up output value according to your system voltage .
*Charging for your notebook, PDA and all kinds of digital products as a automotive electronic power .
*DIY a notebook mobile power : With 12V lithium battery .
*The solar battery board .
*DIY high current mobile power,it can be set up to 5V by uninodal lithium battery ,with USB and identification of resistance, and 2.5A current output .It can be charging for several mobiles .
Operation instruction:
*Voltmeter power supply choose : You can choose voltmeter power supply is input supply or output supply by jumper on board ( IN meter is input ,while OUT meter is output ) Lower voltage can be reduced the damage of voltmeter ,just need to connect jumper with jumper cap and short circuit . Voltmeter is off when taking down jumper cap .
*USB output port: Onboard USB interface is connected with output port directly ,When 3V is up to 5V ,can be charging for mobile directly ,with identification of resistance .What you need to pay attention to is ,please make sure output voltage is consistent with your digital products when USB output . Or it will burn your digital product .
*Display voltage, current conversion: The module is display input voltage ,output voltage and output current by ripple switch .VI represents input voltage ,while VO represents output voltage . And IO represents output current .