Related posts

Feature

Allows for the use of the OEM Honda XR600 and XR650 air box with Mikuni TM42
Manufactured from premium quality aluminium
Silver anodised for enhanced appearance and material surface protection
Mikunioz (Australia) aftermarket designed and independantly manufactured item.
2mm wall thickness for maximum strength and regidity

Description

This Mikuni TM42-6 Flatslide Pumper Carburetor air-box adapter is designed for use on Honda XR600 and Honda XR650 or use on other motorcycles requiring an extension when wanting to use the standard OEM air-box. This adapter may require shortening for some applications where correct length sleeves are not available. The adapter is made from silver anodized aluminum with a 2mm wall thickness for strength and rigidity. This air filter, air cleaner, air box adapter sleeve has been designed and manufactured for a good interference fit over the Mikuni carburetor spigot. The sleeve has a 65mm ID at the carburetor spigot with a 30mm extension at 60mm OD. This spigot must be installed by a competent person. It is recommended to carefully remove with a fine file any protruding castings found on some carburetor spigots before pressing on the new sleeve. When pressing on the sleeve we recommend the use of a high strength 620 Loctite retaining compound or high strength two pack epoxy. The adhesive besides helping bond both items together will fill and seal any imperfections found on some carburetor spigots and also acts a a slight lubricant for the fitment.