Related posts
Feature
The inside of the cooling plate must not be filled with water. The humidity around the cooling plate must not exceed 80%. Voltage: DC 12VPower supply wire: 20AWG wire length 150mm 105C standard tinned wire, PVC insulation, wire end stripping 71mm wire soldered on one end of the hot surface, lead length is based on the actual length of assembly in the workshop, but also can be customized according to customer special requirements. Positive and negative: red + positive, black negative -.
The working status of the cooling sheet is one side of cooling and heating. It is necessary to provide good heat dissipation to the heating surface when working. It is strictly prohibited to power on for more than 2 seconds without heat dissipation, causing overheating and burning of the buyer's conceit. Install the radiator must be coated with thermal grease, there is literally cold, no literal hot surface.
It is necessary to install a radiator or a water-cooled heat sink on the heat dissipation surface, otherwise it will burn out. . Use DC power supply voltage must not exceed rated voltage, power ripple system .The number is less than 10%.
The current must not exceed the rated current of the module. Connect the cooling plate and the fan to the power supply (be sure to pay attention to the polarity). Otherwise, the computer may not work due to insufficient power. It is recommended to use an external voltage of about 12V. At this voltage, the cooling capacity of the cooling plate and the temperature difference between the hot and cold surfaces are suitable