Related posts

Feature

Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today's RV'er. Provides water for RV Trailer mobile home in Winter.
Reticular carbon fiber design provide heated evenly & efficiently.
Built in thermostat is set to turn itself on at 45F( + - 5 degrees) and turn itself off at 68F( + - 5 degrees). As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing.
Self adhesive make it easy installation, 3mm foam insulation pad, no extra facility required.
2-Wires Design without Plug- Convenience for fixed place installation. Includes Lead Wire for Power(Red wire) and Ground Wire(White wire). The model works efficiently up to 40 gallon holding tanks

Description

Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing.
Winter convenience of Today's RV'er. Provides water for RV Trailer mobile home in Winter.

Properly sized and installed Facon Heater Pads provide consistent & efficient protection as the first signs of freezing winter weather approach.

Specifications:
Pad size (Inch): 12" x 18"
Foam Pad thickness: 3.0MM
Volts : 13.5 V DC
Power:65 W
Electric Current: 4.8A
Lead Wire Lengh: 36''

User's Tips:
1.Do not Stretch the pad.
2.Apply tank heater pads to smooth and clean surfaces.
3.Identify the lowest point on the holding tank, closest to the drain.
4.Clean the surface of the holding tank with isopropyl alcohol and let dry.
5.Peel back the paper from the adhesive, and then press firmly and smoothly over the intended placement area.
6.Please ensure after installation the lead wires are securely located and will not hang below the surface of the tank.
7.The GSHP-1218T requires 13.5V DC to operate at maximum efficiency.
8.Please ensure the connection to the proper voltage and the proper"on/off" switch is used.
9.If two or more tank heater pads are to be used they must be connected parallel.