Related posts

Feature

The machine for a full set of spare parts, shall be installed by the buyers,the package include the CD , with detailed user manual and free software,buyers don't need to worry about machine Assembly
Body with aluminum and plastic, small size, light weight, USB interface, GRBL control system, learning, entry to use the preferred. Can use carving knife, but also can use laser engraving.
Our 1610 cnc router machine can carve wood, plastic, acrylic, PCB, PVC, soft metal like copper and aluminum, can not carve hard metal nor jade.
Some components and core components have been assembled, the customer only need to assemble the rack according to the installation instructions can be used, the control board wiring is basically a connector, do not need professional knowledge.
After 2 hours' operation, it's should be rested for 15 minutes. Otherwise the laser head would easily come out the problem of light failure. Support System: Windows XP / Win 7 / Win 8 / Win 10 (Other systems are not compatible)

Description

ZERO BAD FEEDBACK STOR: GDAE10 shop Guarantee: GDAE10 is a lifetime 0 bad feedback shop, GDAE10 customer department will reply your information within 24 hours, if If you have any questions, please feel free to contact us.

Introduction:
Body with aluminum and plastic, small size, light weight, USB interface, GRBL control system, learning, entry to use the preferred. Can use carving knife, but also can use laser engraving.

Some components and core components have been assembled, the customer only need to assemble the rack according to the installation instructions can be used, the control board wiring is basically a connector, do not need professional knowledge.Can be carved plastic, wood, acrylic, pvc, pcb, on behalf of the wood and the like material.

After 2 hours' operation it's should be rested for 15 minutes. Otherwise the laser head would easily come out the problem of light failure.

Specification:
Interface: USB
Profile Dimensions: 260x240x220mm (excluding motor protrusions)
Travel (engraving range): 160x100x40mm
Screw: Professional T8 screw, lead 4mm, double copper nuts eliminate the poor back
Stepping Motor: The new 42 stepper motor, reliable quality
Voltage: 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
Spindle: 775 spindle motor (12-36V) 24V: 7000r / min, 36V: 9000r / min
Laser head: 500MW
Power: 24V 5A power adapter (input voltage 110-240V), simple and convenient
Countertops: 20100 aluminum (table size: 180x100mm)
Rack: 2020 profiles
Gray Part Material: Plastic
Control software: Grbl Control