Related posts

Feature

Supports reading and writing frequency: 125KHz, 250KHz, 500KHz, 375KHz,625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz(ISO14443A/B)
Supports reading: EM4100/EM4200, MF1 classic cards, Ultralight, Ntag203, H/ID 1386/1326/1346; Supports card writing: HID, T5577, EM4305, Mifare UID cards
How to Use : 1.Read: Put the induction card in the induction area behind the machine and press the "read" key; 2.Write: After the card is successfully read, place the blank card in the induction area and press the "read" key
Powered by 4 AAA batteries(not included), easy to carry, also can use 5V USB power supply,NOTE: When you use the USB cable connect the PC, please remove the batteries at first
Packaging: 1 x Handheld RFID Copier,1 x USB cable, 5 x T5577 writable Thick cards , 5 x UID Changeable 1k Tags ( 4 byte UID , Zero 0 sector can be writable )

Description

How to copy the 125khz RFID cards?

1.Press the Power button,put the original 125khz cards on the back of the copier,the copier will be show the "Disclaimer"page.
2.Press "ok" button, then put the cards on the back side of the copier and press"scan".This copier will auto scan its frequency and show the card number.
3. Put one 125kHZ writable key on the back of the copier, then press"Write".It will be written successfully.


The device support back up WG26 H ID cards or tags,If you need copy your H-ID cards or Tags,please comfirm your cards format whether WG26 . Otherwise, it won't support .

The T5577 writable chip cards support back up WG26 H ID cards .Please kindly note : If you have used the T5577 copied the H ID cards , The T5577 Cards will rewritable for H ID cards.

It can't back up EM4100 EM4200 TK4100 cards again .It just back up H-ID cards.

lf the 13.56MHz Mifare card is encrypted, you must use software encryption software.

When you use the USB cable connect the PC, please remove the batteries at first !!

The device NOT include batteries , because the transport limited .