Related posts

Feature

16mm roller shades motor, control type: Do not built-in radio controller, Can not control with remote directly, please connect with other receiver or controller first, Low Voltage hard wired DC 12V Motor Systems can be work with home automation solutions via smart devices as well when used with a network hub, eg. RF control or hard-wired switched
Easy-to-use - switch or controller, to run shades up and down and have two electrical wires : positive and negative, Switching individual shades is accomplished by a 3 position DC switch, to drive a DC motor forwards and backwards
Roller & Screen Shades of various roller tube sizes, Suit for the 0.827 inch/21mm Aluminum tube, please check your Aluminum roller tube first before place the order
Hard wired window shades offer heavier duty DC motors that do not require changing or re-charging batteries
Suitable for Roller Shades, Sheer Shades, Solar window shades,Quiet motor with Lift capacities 4.4 lb shades, light fabrics or shades less than 4 square meter of material

Description

Please note

1. Hardwired systems: Typically seen in new home buildings, hardwired systems require each switch, sensor or device to be centralised to one location through wiring
it is advised that a professional design and install hardwired systems. Examples of hardwired home automation systems include C-Bus or simple switches

2.This kind of motorized window treatment is mostly supplied with 12V DC, It has a power cord that is plugged into a socket outlet. Wired slave motors are compatible with C-bus home automation or simple switches


3.This kit requires you to buy the roller shade rod and fabric, DC power cord, or connect your own automation system

4. Program Instruction inside the gift box, please check carefully when open it and prefer to send any message if there is problem

Specifications

-Motor length: 242.5cm
-No load speed: 37rpm
-Current consumption at nominal torque: 500mA
-Nominal supply voltage: 12V
-Minimum supply voltage: 9.5V
-Maximum running time: NO Limit
-Temp Working Range: 32F to 140F (0C to 60C)
-Supply cable type(m) 2x0.20
-Supply cable length with 2 meter

Package Included

1 x 16mm Wired switch motor
1x Drive Wheel and crown for 0.827 inch/21mm round Aluminum tube
1x End cap and Bracket
1x Program Instruction, to show you how to program the limit setting

Buyer requirements

1) What type of shade or window covering am I going to use?

Roller Shade, Cellular, Pleated, Roman, Drapery etc

2)How are motorized window coverings powered?

There are 3 types of motors: wirefree, plug-in low voltage, and plug-in high voltage

3) How would I like to control the window covering?

IR-Remote, RF-Remote, Wall Switch, Touch Pad, IPad, Cell Phone, Automation etc