F2C 858D SMD Rework Station Hot Air Gun Digital Solder Soldering Stations Iron Holder W/3 Nozzles + Accessories 700W

Feature

Specifications:
Operating Volatge: 110V Output Power:700W
Display: Digital LED
Type of Pump & Airflow: Brushless fan with soft air,Air Flow: Max. 120L/min
Noise: Less than 45dB, Temperature Range: 100 to 480 , Component Length of Handle: 120cm

Description

Note: Please read the manual careful before use the item.

Package Content:
1x 858D SMD Hot Air Rework Station
1x Hot air Gun and holder
3x Nozzles(5mm,8mm,10mm)
1x IC extractor
1x Manual

Operation Instruction:
1. To put the unsoldering equipment ready, and leave handle on the holder
2. To connect the power
3. To set the blast nozzle (large caliber nozzle preferred).
4. To switch on the power, the screen display"-",it represents standby model (Available in microcomputer with digital LED)
5. To pressor button (revolving switch )as to set up the temperature. Available in microcomputer with digital LED)
6. To turn the temperature switch as to set up the required temperature. (Available in luminous discharge tube display indication
7. To hold the handle, so the equipment begin to heat. To adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is table.
8. To put back the handle on the holder after the work; meanwhile,the unsoldering equipment switch from heating mode to cooling heating element mode automatically. while the temperature is lower than 100C,the screen displays"-" it stands for switching to standby mode,and after the temperature of heating element is less than 70C,the equipment is on standby.
9. To switch off the power unplug if there is no operation for a long period of time.