ARCELI New ESP8266 5V 10A DC 7-30V Network Relay WiFi Module

Feature

Transmission Distance:400m (max)
Onboard Module:ESP8266 wifi module;in AP mode it can connect with 5 Clients at the same tim
Relay:5V,10A/250V AC 10A/30V DC 5.Baud Rate:9600,8,1,0,06.Features:diode effusion protection;short response time
On-board 5V, 10A/250V AC 10A/30V DC relays, which can continuously pull 100,000 times, with diode escaping protection and short response time;

Description

1. Onboard ESP8266 WIFI module can connect 5 clients simultaneously in AP mode
2. The module has two working modes:
(1) The mobile phone is directly mounted on the WIFI module;
(2) The mobile phone and WIFI module are installed on the router at the same time.
3. Transmission distance:
In the open environment, the maximum transmission distance when the mobile phone is mounted on the WIFI module is 400m;
When the WiFI module and the mobile phone are installed on the router at the same time, the transmission distance is strong according to the signal of the router.
Weaker
4. On-board 5V, 10A/250V AC 10A/30V DC relays, which can continuously pull 100,000 times, with diode escaping protection and short response time;

Hardware introduction and description
Board size: 45*28mm
Board function description:
IN+, IN-: 5V power input;
TX, RX, GND: serial debugging pins;

How to use:
1. The onboard ESP8266 WIFI module has three working modes: STA (client), AP (hot spot), STA+AP (client + hotspot), and correspondingly selects the working mode of the WIFI module according to the working mode of the module. .
2, the module needs to use the serial port debugging software and USB to TTL module to send AT commands to the WIFI module configuration on the computer, USB to TTL module RX, TX, GND pin connected to the module on the TX, RX, GND pin, IN+, IN- connects to 5V power supply.
3. The default baud rate of the WIFI module is generally 115200 or 9600. It can be modified by sending an AT command, for example: AT+CIOBAUD=115200. In general, 115200 is recommended, but 9600 should be used when using a mobile phone to control the relay. The on-board MCU (STC15F104W) has a baud rate of 9600 baud.

Package includes:
1x ESP8266 10A/250V AC 10A/30V DC Network Relay WIFI Module