Related posts

Feature

Quality Materials - Matte Vinyl
Installation info: When installing the racing stripes, make sure the surfaces that you apply the material to must be smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination. Dry application only.
4"x22" = 2 for each side, 4 total
Re-positional vinyl for trouble-free install
Stretchable with heat

Description

4" Fender Hash Mark Racing Stripes, Both Sides (Fits Scion FR-S & most any car). Whats included: 1. 4" x 22" = 2 hash mark for each side. (Trimming required) About the vinyl: All weather high temperature material that is rated for 6 years of outdoor durability. ORACAL 651 is an outstanding intermediate glossy calendared vinyl. ORACAL 651 will last longer with better resistance against shrinking, cracking, or peeling than any other calendared vinyl. The repositionable pressure-sensitive solvent adhesive means you can apply ORACAL 651 on most substrates dry without application fluid and lightly reposition it until it's just right. Then apply pressure to activate the adhesive and finish the installation. Installation info: Dry application only. Professional installation recommended. We are not responsible for improper installation. If you have any questions before you purchase, please email us. Installation Instructions: 1. Make sure the surfaces that you apply the material to is smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination. 2. You can apply the racing stripes almost anywhere on the fender you like, normally with a 1" gap. 3. When you have the location you want to put the racing stripes, Peel off the backing from the decal (NOTE: pull off slowly.) exposing the adhesive side. Start from one side, stick the decal to the surface, then using a squeegee or a credit card wrapped in cloth to make sure it does not scratch the decal, start working your way to the other side of the decal applying pressure with the squeegee or credit card in order to remove the air bubbles. Be sure to apply pressure on the edges to make sure it is securely stuck on correctly. 4. When the vinyl has been applied, trim the excess. 5. If you still have air bubbles under the decal, use the squeegee or credit card to work the bubbles out. Start from the middle of the decal and work them out to the edge.