Related posts

Feature

Quality Materials - 5D Glossy Carbon Fiber vinyl
Installation info: When installing the racing stripes, make sure the surfaces that you apply the material to must be smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination. Dry application only.
2"x22" = 1 & 3"x22" = 1 set for each side
Re-positional vinyl for trouble-free install
Stretchable with heat

Description

2" & 3" Fender Hash Mark Racing Stripes, Both Sides (Fits Scion FR-S & most any car). Whats included: 1. 2" x 22" = 1 hash mark for each side. 2. 3" x 22" = 1 hash mark for each side. These Racing Stripes are made of carbon fiber vinyl, This is NOT REAL CARBON FIBER. Our Vinyl is a dual cast file specifically designed to provide dimensional stability and durability. The pressure-activated adhesive allows you to re-position the film until you apply firm pressure. Installation Recommendations: This vinyl can be installed using 3M Primer 94 and 3M Edge sealer, these are recommended by 3M vinyl wrap training class, these products will promote adhesion and add life to your vinyl. We would highly suggest using a 3M primer 94 and professional installation. (Trimming required). Installation info: Dry application only. We are not responsible for improper installation. If you have any questions before you purchase, please email us. Installation Instructions: 1. Make sure the surfaces that you apply the material to is smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination. 2. You can apply the racing stripes almost anywhere on the fender you like, normally with a 1" gap. 3. When you have the location you want to put the racing stripes, Peel off the backing from the decal (NOTE: pull off slowly.) exposing the adhesive side. Start from one side, stick the decal to the surface, then using a squeegee or a credit card wrapped in cloth to make sure it does not scratch the decal, start working your way to the other side of the decal applying pressure with the squeegee or credit card in order to remove the air bubbles. Be sure to apply pressure on the edges to make sure it is securely stuck on correctly. 4. When the vinyl has been applied, trim the excess. 5. If you still have air bubbles under the decal, use the squeegee or credit card to work the bubbles out. Start from the middle of the decal and work them out to the edge.