Related posts

Feature

Model: incremental rotary encoders, AB two phases.
Light weight and small size. Easy installation.
600P/R-600 pulses per revolution. By rotating the grating disk and optocoupler direction which generate counting pulses.
Fits for measuring the rotational speed of the object, angle, acceleration, and length measurement.

Description

Functions
It can be used to measure the rotational speed, Angle and acceleration of the object and the length measurement.
Suitable for a variety of intelligent control displacement measurement ,automatic fixed-length automatic guillotine paper machine, steel cut length control, civilian measured height human scale, students racing robots.

Specification
-Encoder size: 38 x 35.5mm/1.49" x 1.39"
-Shaft: 6 x 13mm/0.23" x 0.51"
-Axis stopper platform: High 5mm, 20mm
-Power source: DC 5-24V
-Maximum mechanical speed: 5000 R / min
-Response frequency: 0-20KHz
-Fixed empty as: three 3mm screw holes distribution of 120 degrees / or six 3mm screw holes into 60 degree distribution, to the center distance of 14mm.
-Wires length: 150cm

Wiring Output:
A phase, B phase, Vcc positive supply, V0, the shield wire.

Connection:
Green = A phase, white = B phase, red = power +, black = V0
Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor.

Output
AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type ,the output of this type can and with additonal added pull-up resistor(not included) is directly connected MCU or PLC, such as 51 single or Mitsubishi PLC (PLC input mode should be connected to 0V switch function ).

Note:
If the encoder is not connected to the device can not be directly connected to oscilloscope ( open collector output without pull-up resistor when there is no voltage output) If you want the oscilloscope in AB two-phase output, work with two pull-up resistors(not included).

Package content
1 x 600P/R Incremental Rotary Encoder