Related posts
Feature
LCD 12864 is an rotary encoder and a 128 x 64 dot matrix LCD display, full graphic Smart Controller contains a SD-Card reader.Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD cardRAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform
The Mega 2560 is compatible with most shields designed for the Arduino Duemilanove or DiecimilaA4988 is a complete microstepping motor driver with built-in translator for easy operation
DRV8825 is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance
Description
RAMPS 1.4Controller Board:
1.Heater / fan output and three thermistors MOSFET circuits;
2. Fusion 5A additional safety and component protection;
3. Extra bed heating control fuse 11A;
4. Suitable for 5 Pololu stepper driver board;
5. Pololu board pin socket, easy to be replaced and removed;
6. I2C and SPI pin for extended use; All MOSFET into PWM pins for versatility;
7. Rated current: 3A; LED indicates when the heater output;
Mega 2560:
1. The Mega 2560 is a microcontroller board based on the ATmega2560
2. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button
3. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started
4. The Mega 2560 is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
5. The Mega 2560 is an update to the Arduino Mega, which it replaces
LCD 12864:
1, large screen 12864LCD(3.2'), support 8 GB
2. With a SD card base on back
3, Product comes encoder parameter adjustment can be achieved, and the file selection print
4, Plug and play on the RAMPS, but need to modify the firmware to support
Package list:
1 x RAMPS 1.4 controller
1 x Mega 2560 R3
LCD 12864 smart controller
5 x DRV 8825 stepstick driver
5 x heat sink