Related posts
Feature
The CTR-CD1224 is a pump and fan speed controller and temperature monitoring unit in a 5.25in drive bay profile.The maximum pump output can be set for 12V or 24V.
This unit incorporates a 2-line OLED display for user control and feedback.
Configure a dynamic fan ramp based on min/max temperature set points.
Show flow rate in LPM or GPM (optional Koolance flow meter required).
Description
The CTR-CD1224 is a pump and fan speed controller and temperature monitoring unit in a 5.25in drive bay profile. The maximum pump output can be set for 12V or 24V. This unit incorporates a 2-line OLED display for user control and feedback.
Configure a dynamic fan ramp based on min/max temperature set pointsShow flow rate in LPM or GPM (optional Koolance flow meter required)
Controls a 12VDC (max 36W) or 24VDC (max 50W) pump with 10 user levels
Fan output up to 2A (12VDC) on each connector
Show pump and fan RPM
Select only the values you want displayed
Adjust alarm and shutdown points independentally for all 3 temperature sensors (included)
Shutdown relay can be configured as normally-open or normally-closed
Powered by a 12VDC input
The CTR-CD1224 has three fan outputs. To connect more than three fans, simply add them together with a fan wiring harness. A pump wiring harness is included for powering a Koolance 3-pin or 4-pin pump.
CAUTION: Do not operate components at voltages which exceed their specifications. Running a 12V-max pump at 24V from the speed controller can damage the pump. Do not connect devices which exceed the controllers maximum power rating (36W@12V, 50W@24V).