Finding the best infered temperature gun suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Etekcity Lasergrip 1025D Yellow/Gray One Size Thermometer Temperature Gun-58F~1022F (-50C~550C) with Adjustable Emissivity, Non-Contact Voltage Tester (NCV)
Feature
BETTER ACCURACY + DUAL LASER: Dual laser technology makes it easier to see the area and surface being measured. 12:1 Distance to spot ratio allows you to measure temperatures ranging from -58F to 1022F (-50C to 550C) from a safe distance, which make sure the safety of your hand compared to other instant read thermometerADJUSTABLE EMISSIVITY: Adjustable emissivity improves the accuracy of your measurements across different types of surfaces; adjust anywhere from 0.1-1.0. Emissivity is the measurement of an object's ability to emit infrared energy
VOLTAGE DETECTING & MULTIFUNCTION: Use the Non-Contact Voltage (NCV) mode to detect live voltages ranging from 90V to 600V; the Lasergrip 1025D will emit a high-pitched tone when it detects the highest voltage in a connected circuit. Switch between F/C, max measurement hold, automatic data hold, auto-off, and low battery indicator to remind you to replace the battery
VERSATILE USE: Check barbecue grills and skillets to see if they are the perfect temperature to cook food, perform home auto maintenance with ease, or use for commercial heating, ventilation, and air conditioning (HVAC) installation
NOTE: temperature readings from this devices are inanimate objects. The measured temperature for humans or animals will not be correct, 9V battery included. FDA, FCC, CE, RoHS approved; Class 2 laser, optical power 0.3-0.49mW; 2-Year warranty provided by Etekcity
Description
NOTE1. The measuring surface is about 2cm below the infrared aiming point.
2. For best accuracy, the distance between the thermometer and object of measurement shold approximately be 14.17inches (36cm).
Simple Operation - Point and Click!
Just by one press of the trigger, this thermometer will turn on, the laser pointer shows target and the big LCD will read the temperature in less than 0.5 second.
Live Voltage Detection
Switch the Lasergrip to its non-contact voltage (NCV) mode to detect live electrical currents ranging from 90V to 600V. Test electrical outlets, battery power for hobby aircraft, and even exposed wires that could present potential hazards at home. The Lasergrip will emit a low beeping tone when a current is detected, and will emit a high-pitched tone when the highest voltage in the circuit is detected.
Specifications
Temperature Range: -581022(-50550 )
Accuracy: 100C2% / 100C2C
Distance Spot Ratio: 12:1
Emissivity Adjustable: 0.1-1.0
Response Time and Wavelength: 500ms and (8-14)um
Repeatability: 1% or1
Resolution: 0.1 or 0.1
Package Included
1x Etekcity Lasergrip 1030D thermometer
1x 9V DC battery
1x User's manual
2 Year Warranty by Etekcity
2. Etekcity Lasergrip 1080 Non-contact Digital Laser Infrared Thermometer Temperature Gun -58~1022 (-50550), Yellow and Black
Feature
Versatile Design: Infrared Technology makes this thermometer handy to use when cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks; Measure all the from -581022/ -50550Better accuracy: the distance to spot ratio is 12: 1, meaning the Laser grip 1080 can accurately measure targets at greater distances compared to most other ir thermometers
Target quicker: a built in laser gives you the precision to hone in on the Exact space you want to measure. Don't blindly guess where you're pointing your infrared thermometer
Added function: the LCD screen is backlit, also has an auto-off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
Note: Temperature readings from this devices are inanimate objects. The measured temperature for humans or animals will not be correct. FDA, FCC, CE approved; Class 2 laser, optical power 0.5-0.9mW; 2-Year Warranty by Etekcity
Description
1. The measuring surface is about 2cm below the infrared aiming point.2. For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17inches (36cm). Simple Operation - Point and Click!
This Etekcity non-contact IR temperature gun is easy to operate. It turns on and begins reading the temperature with one press of the trigger. Clear text displays the measured temperature in either Celsius or Fahrenheit. A laser light aids in aiming, and can be turned on or off. In addition, the readout display features a backlight which can be turned on if needed.
12:1 High distance spot ratio!
This means you may measure the temp of a smaller area at the same distance compared to other 8:1 thermometers; thus the readings are much more accurate!
Reliable Product
This is a big seller in Amazon and many respected institution like Car Magazines, Airports, Universities purchase this product from us! You deserve it!
Specifications
Temperature Range: -581022(-50550)
Accuracy: 2%
Distance Spot Ratio: 12:1
Emissivity Adjustable: 0.95(fixed)
Response Time and Wavelength: 500ms and (5-14)um
Repeatability: 1% or1
Resolution: 0.1 or 0.1
Package Included
1x Etekcity Laser grip 1080 IR thermometer
1x 9V DC battery
1x User's manual
2-Year Warranty by Etekcity.
3. Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun -58~ 716 (-50 ~ 380), Yellow and Black
Feature
Versatile Design: Infrared Technology makes this thermometer handy to use when cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks; Measure all the from -58~ 716 / -50 ~ 380Better Accuracy: The Distance to Spot Ratio is 12:1, meaning the Laser grip 774 can accurately measure targets at greater distances compared to most other IR Thermometers
Target Quicker: A built in Laser gives you the precision to hone in on the exact space you want to measure. Don't blindly guess where you're pointing your Infrared Thermometer
Added Function: The LCD screen is backlit, also has an Auto-Off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
Note: Temperature readings from this devices are inanimate objects. The measured temperature for humans or animals will not be correct; FDA, FCC, CE approved; Class 2 laser, optical power 0.5-0.9mW; 2-Year Warranty by Etekcity
Measures in Celsius or Fahrenheit (Range: -58~716 / -50 to +380)
Built-in laser for precisely aiming; one 9-volt battery (Included)
Distance Spot Ratio: 12:1; Emissivity: 0.95(fixed); Response Time: <500ms
Auto Shut-off & Data Hold Function & Low Battery Indicator & Backlight Display Selection
FDA, FCC, CE, ROHS approved; 2-Year Warranty by Etekcity
Description
NOTE1. The measuring surface is about 2cm below the infrared aiming point.
2. For best accuracy, the distance between the thermometer and object of measurement shold approximately be 14.17inches (36cm).
Etekcity Lasergrip 774 Thermometer guns have been used by major airports and security offices during the 2014 Ebola outbreak.
Laser Guided
Aim with precision at whatever you wish to measure, thanks to the laser beam guidance feature. Even from a far distance, the laser provides a mark to ensure accuracy every time you make a measurement.
Infrared Lens
The Infrared lens inside the Lasergrip 774 Thermometer provides temperature readings without the need to touch or come close to anything dangerously hot or cold. You'll be able to effortlessly measure high temperatures, hazardous and inaccessible objects, and even moving targets; such as hot engine parts, cooking surfaces, swimming pools, bath water, wine coolers, hot asphalt, electric bearings, and much more.
Specifications
Temperature Range: -50380 (-58716)
Accuracy: 2% or 2
Distance Spot Ratio: 12:1
Emissivity Adjustable: 0.95(fixed)
Response Time and Wavelength: <500ms and (8-14)um
Repeatability: 1% or1
Resolution: 0.1 or 0.1
Storage Temperature: -20-50 (-4-122)
Operating Temperature: 0-50 (50-122)
Certifactions: FDA, FCC, CE, ROHS
Package Included
1 x Etekcity Non-Contact Infrared Thermometer
1 x 9-Volt Battery
1 x User's Manual
2 Year Warranty by Etekcity
4. Etekcity Lasergrip 630 Dual Laser Digital Infrared Thermometer -58~1076 (-50 to 580) Non-contact Temperature Gun with Adjustable Emissivity & MAX/MIN/AVG Display
Feature
BETTER ACCURACY+ADJUSTABLE EMISSIVITY: The Distance to Spot Ratio is 16:1, meaning the Laser grip 630 can assure greater accuracy compared with other thermometers with DSR 12:1 or 8:1; Adjustable emissivity improves measurement accuracy across different surface types, just regulate the emissivity of your 630 according to the instruction (0.1-1.0)DUAL LASER+TARGET QUICKER: Dual laser pointers ensure high precision and indicate ideal measuring distance; Measure surface temperature ranging from -58F ~1076F / -50C ~ 580C, you can choose the unit from F / C; Response time: 500Ms
MULTIFUNCTION: Thermometer with max/min/avg temperatures function; the LCD screen is backlit, it also has an auto-off function and a low battery indicator to extend the battery life so you never accidentally run out of juice (battery included)
VERSATILE DESIGN: Infrared technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points; Use it for cooking, car maintenance, real estate, Electrical engineering and more
NOTE: For best accuracy, the distance between the thermometer and object of Measurement should approximately be 14.17 inches (36cm); Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct; FDA, FCC, CE approved; Class 2 laser, optical power 0.3-0.49mW; 2-year warranty by Etekcity
Description
Hazard-FreeThe Lasergrip 630 gives you complete control to measure the temperature of virtually any surface with custom and refined accuracy. Measure temperatures ranging from -58F to 1076F from a distance without ever having to come into contact or proximity to hazardous elements. Measuring GuideWith dual lasers, theres no more guessing on what the size of the surface area youre actually measuring. With a high distance to spot ratio of 16:1, you have the control over how wide of a surface you wish to measure. The two laser pointers will act as a visual guide for your measurements as the Lasergrip will calculate the average temperature of the space between the two laser points. For best accuracy, stand at a distance where the two points overlap. This device also allows you to adjust the emissivity to compensate for different surface textures. Whether scanning the heat on an aluminum tray or concrete road, the Lasergrip will deliver the same dependable accuracy to get the job done. Features & Specifications: 1.Measurement Range: -58F ~1076F (-50C to 580C ) 2.Storage Temperature: -20C to 50C (-4 F to 122F) 3.Operating Temperature: 0 C to 50C (32 F to 122F) 4.Accuracy:2% /2C 5.Adjustable Emissivity:0.1-1.0 6.Resolution: 0.1F /C 7.Distance to Spot Ratio: 16:1 8.Selected Thermometer units: C /F 9.Response Time: 500ms 10.Battery/ Battery Life: 9V / about 12 hours Package Included: 1x Etekcity Lasergrip 630 Thermometer 1x 9V DC Battery 1x User's Manual Note: 1. This thermometer cannot test the temperature of target objects through across the glass. Besides, the steam, dust, smog will lower the accuracy of testing. 2. To make better accuracy, cover the surface to be measured with masking tape or flat black paint.5. Infrared Thermometer, SURPEER IR5D Laser Thermometer Gun -581022(-50550) Adjustable Emissivity - Temperature Probe for Cooking/Air/Refrigerator/Freezer - Meat Thermometer Included
Feature
[HIGH ACCURACY]: Combining the latest temperature sensor technology and advanced Fresnel lens, this instrument reads values of high accuracy up to 1.5/1.5% in only 0.5s thanks to adjustable emissivity. The distance to spot ratio is 12:1, which means you can measure the target at a longer distance.[VERSTILE DESIGN]: With wide temperature range -50550(-581022), you can apply this tool in cooking, barbecuing, auto maintenance, home repair, or other tasks of household. To your surprise, it can also be treated as a cat/dog toy with a red laser dot.
[HIGH/LOW TEMP ALARM]: With the built-in laser, you can target quicker, the LCD backlit can be turned on/off. By slightly pressing the measure button, you can instantly get Max/Min/AvgA/Diff value; More importantly, the buzzer alarm will beep when the value reaches the high/low temp you have set.
[FREE COMPLIMENTARY MEAT THERMOMETER]: Featuring quick reading, high accuracy (1/2), 10 minutes auto-off, long probe and 304 food grade stainless steel, it can measure inner temp of food with wide temp range -50300(-58572). Together with infrared thermometer, it makes the best cooking aid for food lovers and gourmets.
[LONG BATTERY LIFE]: Low consumption of 15mAh promises longer battery life, which can last at least 6-12months in normal use. And 8s auto-off helps to save power, the low battery indication will remind you of juice running out. Furthermore, we provide one year guarantee and return for a full refund within 30 days.
Description
SURPPERLife's in Good Hands
12 months warranty and return for a full refund within 30 days
Adjustable Emissivity
Adjustable emissivity from 0.1-1.0, guarantees the most accurate measurement.
Check Leaks and Poor Insulation
This product has so many applications from diagnosingair leaksin window and door installations to
checking your refrigerator and freezer temperatures. And a safe enoughDSR (12:1) and non-contact
feature protect you from danger.
Easy to use
After installing the 9V battery, you only need to slightly press the measure button and aim the target
by using the red laser, then adjust the emissivity according to the emissivity form on user manual,
finally press" set" to get Max/Min/Avg/Diff values.
Specification of IR5D Infrared Thermometer
1. Temperature Range: -50550(-581022)
2. Accuracy Resolution: 1.5/1.5%
3. Response Time: 0.5S
4. Emissivity: Adjustable (0.1-1.0)
5. Distance to Spot Ratio: 121
6. Reading Holding: 8s
7. Auto-off Time: 6s
8. Power Life: 9V 6F22
Notice:
1. In a vacuum environment, this distance to spot ratio is 12: 1; in generalenvironment, this distance
can be appropriately shortened in order to get more accurate values.
2. Infrared thermometer can not test the temperature of target objects through across the glass.
3. Infrared thermometer can not measure the surface temperature of transparent objects like glass,
you can cover a black cloth on it; after 10-15minutes, you can measure the black cloth to get the surface
temperature of the transparent objects.
Package List:
1* SURPEER IR5D Infrared Thermometer
1* Meat Thermometer
1* 9V Battery
1* Multilingual User Manual
1* Customer Care Card
6. Fluke 62 MAX IR Thermometer, Non Contact, -20 to +932 Degree F Range
Feature
Infrared thermometer for noncontact surface temperature measurement for use in monitoring electrical, mechanical, HVAC, and automotive systemsMeasures temperature from -30 to +500 degrees C (-20 to +932 degrees F) with an accuracy of + or - 1.5 degree C or + or - 1.5% of the reading from 0 to 500 degrees C
10:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area
Displays the minimum, the maximum, the difference between the two temperatures, and the average temperatures
Certified IP54 for protection against dust and splashing liquid
IP54 rated for dust and water resistance
Small and lightweight making it easy to clip to your tool belt or belt loop
Precise laser technology makes for more accurate and repeatable measurements
Large Backlit display makes it easier to read data, even in dark areas
Rugged built to last design that can withstand a 3 meter drop
Description
IP54 rated for water and dust resistance. Features. Withstands a 9.8 foot drop Test. temperature range 62 Max -22 to 932 Max -22 to 1202. adjustable emissivity. Hi and low alarms. dimension - 6.8 x 3.3 x 2.9 in.7. Black & Decker TLD100 Thermal Leak Detector
Feature
Uses infrared sensors to measure surface temperaturesHelps homeowners track down power-draining drafts
Sold with a 5-step guide to fixing basic energy leaks and comes with the thermal leak detector
Plugging leaks can save up to 20 percent on heating and cooling costs
Backed by a two-year warranty
Description
Heating and cooling accounts for about 50 percent of your energy usage, but the average house has enough leaks and drafts to equal a 1 sq. ft. hole. Cut down on wasteful spending with the help of the Thermal Leak Detector from Black and Decker .The TLD100 is an infrared sensor that finds these leaks along walls, molding, ductwork and more. Auto color change provides quick, intuitive feedback, showing users where to caulk, insulate, etc.8. Infrared Thermometer Non-Contact Digital Laser IR Temperature Gun for Kitchen Meat Food Cooking BBQ Automotive Industrial Thermostat with Flashlight HD Backlight LCD Temp Display
Feature
HIGH ACCURACY & NON-CONTACT - With distance to spot ratio 12: 1 , and built in 12 laser pointers to accurately aim at,non-contact digital laser only need 1s can accurately measure temperature of the target at greater distances. Simple operation and convenient use. FDA aprroved. We promise 60 days money back or replacement for no reason,plus 365 days warrantyWIDE TEMPERATURE RANGE - Temperature gun accurately test the temperature during -58 - 1022 (-50 to 550), this smart ir infrared thermometer will automatically set the maximum/minimum alarm value according to different objects, very efficient for testing
HD BACKLIGHT & UNIT CONVERSION - Colorful backlight lcd screen is specially designed for ir laser thermometer to clearly record the temperature data in dark room, and features a low battery indicator. In addtion,support Degrees Celsius and Fahrenheit,this thermometer defaults to Fahrenheit. (Battery is includeded)
VARIOUS USAGES - Digital infrared thermometer makes it handy to use in cooking and barbequing, home repair, automotive cooling system, outdoors&indoors, industrial, chemical and a host of other works. It's essential tools for electricity, chemicals, coal, boilers, pharmaceutical
SUIT FOR ALL INANIMATE - The temperature measured for humans or animals will not be accurate, it is specially designed for inanimate. moreover, this is an infrared thermometer, and the measured values should be slightly lower than the true value when measuring the surface temperature of the reflective metal objects or human body
Description
Why You Need Estink Digital Laser Thermometer?Estink ES6530B is a non-contact infrared thermometer that allows you to measure the temperature of an object from a distance by sensing its radiated infrared energy. It has countless usages including cooking, barbequing, making chocolate/Pizza, home repair, automotive and industrial and so on
What Makes Estink Digital Infrared Thermometer Special?
#1. Built-in 12 laser points surrounding a circle to accurately measure the object, won't be disturbed by surrounding objects.
#2. Measure surface temperatures between -58 - 1022 (-50 to 550) with an accuracy of (1.5% of reading+ 2C/3.5F whichever is more accurate than others.
#3. Auto setting different Min, Max temperature value when testing different objects. The green/red light indicator will remind you if temperature has exceed the maximum value.
#4. Adjustable emissivity provides increased accuracy for different materials.
#5. Powerful button function that allow u set backlight screen on/off / and / laser point on/off and Emissivity.
Specifications
Laser target pointer: Circle
Emissivity: 0.1~1.0
Accuracy: 1.5% reading+2C/3.5F
Distance Spot Ratio: 12:1
Response Time: <0.5 second
IRT Temperature: -50C~550C/-58F~1022F
Features: Data retention, Backlight, Auto shutdown, Low battery/ Temperature Bridge Alarm, Flashlight
Power: 6F22 9V Battery (Included)
Dimensions: 6.4 x 3.8 x 1.3 inch
Safety: EN61326, EN60825
Package
1* Temperature Gun
1* Holster
1*9V Battery
1*User Manual
Note: not suitable for human body temperature measurement
9. Temperature Gun by ennoLogic - Accurate High Temperature Dual Laser Infrared Thermometer -58F to 1922F - Digital Surface IR Thermometer eT1050D
Feature
ACCURATELY AND QUICKLY MEASURES SURFACE TEMPERATURES UP TO 1922F. Use it in your kitchen to instantly measure the surface temperature of food, pizza stones, oven walls, range tops, frying pans or fryer oil, grill, refrigerator and freezer. Scan for insulation leaks in your home, check air conditioning, heating vents, pipes. Inspect your cars cooling system, catalytic converter, brakes, and tires. Or check the temperature of chicken coops, terrariums, and reptile enclosures.DUAL LASER POINTER FOR PRECISE TARGETING of test area. ADJUSTABLE EMISSIVITY improves the measurement accuracy across different surface types. By setting the emissivity of your IR thermometer to match the material you are measuring, you obtain a more accurate reading. Emissivity is adjustable from 0.10 to 1.00 and a table of emissivity values is included in the manual. AUTO SHUTOFF after 7 seconds. All user settings for laser, backlight, C/F, and emissivity are retained between uses.
SCAN FEATURE TRACKS MINIMUM, MAXIMUM, AND AVERGAGE READINGS while scanning for increased accuracy. Hold button to scan a surface area and find the average, maximum, or minimum temperature for the whole area instead of only a spot reading. This allows you to see temperature variations on a surface. The averaging feature can also be used to obtain a more reliable and accurate reading. To keep track of more than one reading, a MANUAL LOG feature allows you to store up to 20 readings in memory.
HIGH AND LOW TEMPERATURE ALARMS can be set to provide audible feedback when a target temperature is exceeded. Use this handy feature to easily detect when a specific temperature is reached or exceeded, e.g. frying oil. Also includes convenient LOCK FEATURE for continuous hands-free measurements. This allows you to set up the thermometer to continuously monitor an area without pressing the trigger button. The Lock feature is particularly useful when combined with the audible High or Low alarm.
VERY WIDE MEASUREMENT RANGE of -50C to 1050C (-58F TO 1922F). Resolution: 0.1C/0.1F. Accurate to (1% of reading+1C/2F) or 2C/3.5F, whichever is greater. FAST RESPONSE TIME AND FAST POWER-UP. ACCURATE AND EASY TO READ. Backlight and lasers can be turned on and off independently. Switch between CELSIUS AND FAHRENHEIT. Comes with user manual, 9V battery and holster. FDA, FCC, and CE compliant. 10-YEAR WARRANTY, HASSLE-FREE REPLACEMENT GUARANTEE, and 100% MONEY BACK GUARANTEE.
Description
Take accurate non-contact temperature readings of any surface within less than a second.
Warning: Once You Own this Powerful and Fun Tool You Won't be able to Put it Down
The eT1050D from ennoLogic is a noncontact infrared thermometer that allows you to measure the temperature of an object from a distance by sensing its radiated infrared energy. It is a feature-packed instrument with countless home and industrial uses that include cooking (pizza, grilling, candy and chocolate making, tea, beer and wine home brewing), food safety, refrigeration, forging and metalworking, soap making, automotive, A/C, HVAC, pool, and even animals (reptiles, chickens). NOT designed for body temperature measurement or medical use.
-Measure surface temperatures between -58F and 1922F (-50C to 1050C) with an accuracy of (1% of reading + 1C/2F) or 2C/3.5F (whichever is greater)
-Scanning feature with Min, Max, and Average display
-Two built-in laser pointers help you to precisely identify the target spot you're pointing at
-Large easy-to-read display with bright backlight
-Toggle between F and C, and turn backlight and laser on and off individually, all settings retained between uses
-Distance to Spot Ratio 10:1
-Fast power-up and response time of ~500 msec
-Adjustable emissivity provides increased accuracy for different materials
-Adjustable High/Low set points with audible alarm
-Ergonomic, attractive, rugged design
-Package includes one eT1050D, Holster, 9V battery, user manual
The ennoLogic eT1050D comes with a 10-Year Warranty, a Hassle-Free Replacement Guarantee, and a Risk-Free 100% Money Back Guarantee.
Don't fall for imitations, only products with the ennoLogic brand undergo the strict quality test procedures that guarantee their accuracy, and compliance with FDA and FCC regulations.
Click the Add to Cart Button Now or Buy with 1-Click Checkout.
10. HOLDPEAK 981A Non-Contact Digital Laser Infrared Thermometer Temperature Gun Instant-read -58 to 662 (-50 to 350) with 9V Battery and Emissivity 0.1-1.0(Adjustable)
Feature
MEASURE MAX UP TO 662 WITH HIGH ACCURACYTemperature range: -50 ~ 350 (-58~662); Accuracy: 1.5% or 1.5; Distance to Spot Size: 12:1 ; Emissivity: 0.95(Fixed); Response Time: <500ms.MULTIFUNCTIONAL INFRARED THERMOMETER YOU WILL NEEDOptional Laser Target Pointer and Backlight ON/OFF, convenient to accurate targeting and operate in case of poor illumination; / button - switching the displayed temperature from Celsius degree to Fahrenheit degree as you need.
APPLICABLE TO VARIOUS OF ENVIRONMENTSExtremely Handy, Consistent & Versatile for Instant Temp Readings in Work or Home Applications. You just need to aim at the target to measure the current temperature.
MORE EXTRA SPECIFICATIONS THAN OTHERS IR THERMOMETERSPowered by 1 x 9V batteries (Included);Auto Power Shut Off in 7 seconds without any operation ; Low electricity consumption.
SAFTER & FASTERLaser Infrared Thermometer Keep Your Hands Safe: This Amazingly Fast & Safe Way to Measure Temps Without Surface Contact.
Description
HIGHER STANDARD:
Safely measure surface temperatures from a distance while still maintaining
laser-sharp accuracy. Uses a ABS high quality engineering plastics formation,
the contour is artistic, the color is delightful.
Meet the following criteria : CE,ETL, FDA,FCC,ROHS.
Practical for both indoors and outdoors use, the Infrared Thermometer HP-981A is
simple to operate and easy to store. Use the infrared temperature scanner for
a high range of applications, from internal electronic components to oven temperatures.
EXTRAORDINARY FEATURES:
Unique Color screen display, ken is limpid, is clear at a glance.
Automatically locks the D:S to 12:1
Can set the upper or low limit value for alarms. Find the temperature abnormality in real time and locate the fault quickly.
Can freely switch Celsius and Fahrenheit
Turn on or off Backlight and Laser Independently
HAZARD FREE:
Non-Contact measure extreme temperatures ranging from -50C(-58F) to
350C(662F). The Infrared Thermometer HP-981A eliminates the potential
danger of harmful burns or minor frostbite.
SPECIFICATIONS:
Laser target pointer: Circle
Emissivity: 0.95fixed
Accuracy: 1.5% or 2C
Distance Spot Ratio: 12:1
Response Time: <500ms
Spectral Response: 8~14um
IRT Temperature: -50C~350C/-58F~662F
C/F:
MAX:
Hold:
Backlight:
Auto Power Off:
Low Battery Indication:
Temperature Bridge Alarm:
Power: 6F22 9V Battery (INCLUDED)
Dimensions: 6.38 x 3.94 x 1.85 inch
WHAT U GET?:
1 x HOLDPEAK HP-981C Infrared Digital Thermometer
1 x Instructions
1 x 9V Battery
