Finding the best usb data acquisition suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
![PICcircuit iCP12 - USBStick [PIC18F2550 Board with USB Oscilloscope, PC DAQ, Data Logger]](https://images-na.ssl-images-amazon.com/images/I/61M4yVmS%2BgL.jpg)
Reviews
1. USB Data Acquisition Module
Feature
8 single-ended or 4 differential analog inputs11-bit SE, 12-bit DIFF resolution
Two 10-bit analog outputs
One 32-bit external event counter
16 digital I/O lines
Description
The bus-powered USB-1208LS from Measurement Computing adds a low-cost analog and digital I/O interface to any USB port. Providing eight single-ended or four differential analog inputs with 12-bit resolution, the USB-1208LS offers sample rates up to 1.2 kilosamples/sec (8 kS/s for up to 4000 samples). The USB-1208LS also offers eight software selectable input ranges, making it ideally suited for a wide assortment of measurements. In addition to the analog inputs, the unit provides two 10-bit analog outputs, one 32-bit counter, and 16 digital I/O lines. The USB-1208LS is reliable and rugged enough for any DAQ application. If it weren't, it wouldn't come with an industry-best limited lifetime warranty and Harsh Environment Program. The combination of the USB-1208LS and Measurement Computing's DAQ software suite gives you a complete data acquisition solution that will have you taking measurements in minutes. The device is fully USB plug and play and easy to use. It is powered from the USB port, so no external power connection is ever required.2. NUMATO LAB 16 Channel USB GPIO Module With Analog Inputs
Feature
16 TTL (3.3V) compatible GPIOs available7 Analog Inputs
No USB protocol knowledge required
All GPIOs can be individually configured as input or output
https://numato.com/docs/16-channel-usb-gpio-module-with-analog-inputs/
Description
Numato's 16 Channel USB GPIO module is low cost easily deployable solution for connecting your PC to other electronic circuitry through USB. No USB specific knowledge is required to set up and use this module. Features:: 16 TTL (3.3V) compatible GPIOs available, 7 Analog inputs All GPIOs can be individually configured as input or output, Can be controlled by using standard serial console applications or custom applications, No USB protocol knowledge required, On board controller can be reprogrammed for custom applications.3. NOYITO USB 10-Channel 12-Bit AD Data Acquisition Module STM32 UART Communication USB to Serial Chip CH340 ADC Module
Feature
On-board STM32F103C8T6 master chip;On-board CH340 serial port USB chip, convenient to view AD sampling result on PC through USB;
Reserved UART serial communication interface, can be connected MCU;
Analog input channels: 10 channels single-ended input; (For pin description, please refer to the picture).
Sampling input voltage range: 0-3.3V; Power supply voltage: 3.3V / 5.0V; Resolution: 12 Bit;
Description
Code and Test Software Download Link:https://www.amazon.com/clouddrive/share/q6W9ZEHEHn6tpMZi6IiPf2KHRwzT9uaaVeGlQnNA26N
Product Features:
On-board STM32F103C8T6 master chip;
On-board CH340 serial port USB chip, convenient to view AD sampling result on PC through USB;
Reserved UART serial communication interface, can be connected MCU;
Analog input channels: 10 channels single-ended input; (For pin description, please refer to the picture)
Sampling input voltage range: 0-3.3V;
Power supply voltage: 3.3V / 5.0V;
Resolution: 12 Bit;
Size: 50 * 40mm (L * W), (length does not contain USB plug)
USB to Serial Chip CH340
Overview
CH340 is a USB bus adapter chip, to achieve USB to serial port, USB to IrDA infrared or USB to print port.
In the serial port mode, CH340 provides common MODEM contact signal, which is used to extend the asynchronous serial port for the computer or directly upgrade the ordinary serial port device to the USB bus.
Features
Full-speed USB device interface, compatible with USB V2.0, peripheral components only need crystals and capacitors.
Emulation standard serial port, used to upgrade the original serial peripherals, or through USB additional serial port.
Computer-side Windows operating system serial applications are fully compatible, without modification.
Hardware full duplex serial port, built-in send and receive buffer, support communication baud rate 50bps ~ 2Mbps.
Support common MODEM contact signal RTS, DTR, DCD, RI, DSR, CTS.
Through the addition of level conversion devices, providing RS232, RS485, RS422 and other interfaces.
Support IrDA standard SIR infrared communication, support baud rate 2400bps to 115200bps.
CH341 software compatible, you can directly use the CH341 driver.
Supports 5V supply voltage and 3.3V supply voltage.
Package Included:
1*USB 10-Channel 12-Bit AD Data Acquisition Module
4. Extech 407001-USB USB Adaptor For 407001 Extech Heavy Duty Series Data Acquisition Software
Feature
Converts the RS-232 serial cable into a USB connectorDescription
Extech 407001-USB USB Cable and Software Drivers For 407001 Extech Heavy Duty Series Data Acquisition Software; Includes USB Interface Cable, Disc With USB Drivers and Instructions
Key Features- Allows A Meter To Be Connected Directly To A USB Port, Eliminating The Need For A Serial-To-USB Adaptor
- Includes USB Interface Cable, Disc With USB Drivers and Instructions
5. PICcircuit iCP12 - USBStick [PIC18F2550 Board with USB Oscilloscope, PC DAQ, Data Logger]
Feature
Mini size, easy interfacing, high performance and user friendly device. Integrated with pic18f2550 28-pin flash usb pic mcu.13x io port (6x 10bit adc pins, 2x 10 bit pwm/freq/dac pins), serial port emulation (uart baud rates: 300 bps to 115.2 kbps), 5Vdc maximum voltage, 100mA current output at Vdd pin with over-current protection.
Preloaded with HID bootloader and iCP12 DAQ firmware. Supported by Android Apps.
Free SmartDAQ software with 13 sampling channel [6x analogs (10 bits adc) + 7x digitals (input/output)] at 1khz or 1mSec/samples maximum sampling rate. Sampling voltage: 0v - 5v (scalable graph) at 5mv resolution.
Free softwares provide: SmartDAQ, ioControl, serialComm, pwmGenerator, adcStream
Description
usbStick is a mini size 28 pin USB PIC IO board with 13x input, output, analog, pwm pins. Great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/samples period.Peripheral Features:
13x IO Port (6x 10bit ADC pins, 2x 10 bit PWM/Freq/DAC pins)
Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps)
Maximum Voltage: 5Vdc
100mA current output at VDD pin with over-current protection
20MHz oscillator
Green LED - power on indicator
2x LEDs (Green, Red) - status indicator
ICSP Connector - on-board PIC programming
Switch Mode Selection - Boot or Normal mode
SmartDAQ v1.3 Features:
Sampling channel: 6x Analogs (10 bits ADC) + 7x Digitals (Input/Output)
Maximum Sampling rate: 1KHz or 1mSec/Samples
Sampling voltage: 0V - 5V (scalable graph) at 5mV Resolution
Sampling period:
mSec: 1, 2, 5, 10, 20, 50, 100, 200, 500
Sec: 1, 2, 5, 10, 20, 30
Min: 1, 2, 5, 10, 20, 30, 60
Trigger Mode: Larger [>], Smaller [<], Positive edge [], Negative edge []
Sampling Mode: Continuous, Single
Logging Function:
Save Format: Text, Graphic, Both
Start Time: Normal, Once Trigger, 24-Hour Clock (Auto Run)
End Time: Unlimited, Data Size, 24-Hour Clock (Auto Stop)
Accessories List:
28 Pin PIC: PIC18F2550
Preloaded Firmware: HID Bootloader + iCP12 DAQv1.2 Firmware
iCP12 firmware can be updated using Microchip USB HID Bootloader via USB port
NO programmer is required!
6. SainSmart USB 4 Channel Relay Automation 5V
Feature
High quality,Low cost,No extra power supplyFree software with many functions
Control electrical devices according weekday/date/time
Create timers or pulses with our software
Software examples
Description
Overview:This SainSmart USB Relay Controller/Data Acquisition Module allows computer controlled switching of external devices as well as full bi-directional communication with the external world (ideal for Data Acquisition applications) using the USB port of your computer.
Features:
4 SPDT relays SRD-5VDC-SL-C
Relay specification - 10A 250VAC/10A 125VAC/10A 30VDC /10A 28VDC
Power Supply - 5 VDC
Current consumption - 200 mA
FT245RL. Datasheet -( http://www.ftdichip.com/)
Led for each relay output
Power Led
USb led
Size - 101*40*16mm
Windows software examples: VB6, BCB6, Java (netbeans), VB.NET 2010 Express, C++.NET 2010 Express
PCB parameters: FR4 / 1.5mm / two layers / metalized holes / HAL / white stamp / solder mask
Extra PCB openings for better voltage isolation
Doubled high current tracks
Applications:
Home automation
Robotics
Alarms
Timers
Open doors and windows via PC
Aquariums applications
Download:
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-018-910/20-018-910.rar
7. USB 10-Channel 12-Bit AD Data Acquisition Module STM32 UART Communication USB to Serial Chip CH340 ADC Module
Feature
On-board STM32F103C8T6 master chip;On-board CH340 serial port USB chip, convenient to view AD sampling result on PC through USB;
Reserved UART serial communication interface, can be connected MCU;
Analog input channels: 10 channels single-ended input; (For pin description, please refer to the picture).
Sampling input voltage range: 0-3.3V; Power supply voltage: 3.3V / 5.0V; Resolution: 12 Bit;
Description
Code and Test Software Download Link:Product Features:
On-board STM32F103C8T6 master chip;
On-board CH340 serial port USB chip, convenient to view AD sampling result on PC through USB;
Reserved UART serial communication interface, can be connected MCU;
Analog input channels: 10 channels single-ended input; (For pin description, please refer to the picture)
Sampling input voltage range: 0-3.3V;
Power supply voltage: 3.3V / 5.0V;
Resolution: 12 Bit;
Size: 50 * 40mm (L * W), (length does not contain USB plug)
USB to Serial Chip CH340
Overview
CH340 is a USB bus adapter chip, to achieve USB to serial port, USB to IrDA infrared or USB to print port.
In the serial port mode, CH340 provides common MODEM contact signal, which is used to extend the asynchronous serial port for the computer or directly upgrade the ordinary serial port device to the USB bus.
Features
Full-speed USB device interface, compatible with USB V2.0, peripheral components only need crystals and capacitors.
Emulation standard serial port, used to upgrade the original serial peripherals, or through USB additional serial port.
Computer-side Windows operating system serial applications are fully compatible, without modification.
Hardware full duplex serial port, built-in send and receive buffer, support communication baud rate 50bps ~ 2Mbps.
Support common MODEM contact signal RTS, DTR, DCD, RI, DSR, CTS.
Through the addition of level conversion devices, providing RS232, RS485, RS422 and other interfaces.
Support IrDA standard SIR infrared communication, support baud rate 2400bps to 115200bps.
CH341 software compatible, you can directly use the CH341 driver.
Supports 5V supply voltage and 3.3V supply voltage.
Package Included:
1*USB 10-Channel 12-Bit AD Data Acquisition Module
8. Measurement Computing USB-1208FS-PLUS USB-Based 8-Channel Data Acquisition DAQ Module
Feature
Low-Speed USB Device Featuring 8 Analog Inputs, 2 Analog Outputs, 16 Digital I/O and 1 External Event CounterAnalog Input Software Configurable for 8 Single-Ended or 4 Differential Inputs
50 K/s Sample Speed for All Channels (Aggregated across all Channels)
Powered by USB Port, NO External Power Source Required
Includes MCC DAQ Software Suite (Available as a Download) and USB Cable
Description
The USB-1208FS-PLUS from Measurement Computing is a low speed USB device that features 8 analog inputs, 2 12-bit analog outputs, 16 digital I/O connections, and 1 32-bit external event counter. The analog inputs are software configurable for either (8) 11-bit single-ended inputs, or (4) 12-bit differential inputs. Sample speed for all channels cannot exceed 50 kS/s. You can acquire data from 1 channel at 50 kS/s, 2 channels at 25 kS/s, and 4 channels at 12.5 kS/s. 16 digital I/O lines are independently selectable as input or output in 2 8-bit ports. A 32-bit counter can count TTL pulses. The counter increments when the TTL levels transition from low to high (rising-edge). A SYNC (synchronization) input / output line lets you pace the analog input acquisition of one USB module from the clock output of another. The USB-1208FS-PLUS DAQ is powered by the USB port on your computer. No external power is required. Each USB-1208FS-PLUS purchased includes the MCC DAQ Software Suite (TracerDAQ, InstaCal, Drivers for DASYLab and Universal Library for LabView and Android) and USB Cable.Specifications
Analog Input Channels: 8 Single-Ended; 4 Differential
Analog Input Gain: 1, 2, 4, 5, 8, 10, 16, 20
Analog Input Range: +/-20 Volts, +/-10 Volts, +/-5 Volts, +/-4 Volts, +/-2.5 Volts, +/-2 Volts, +/-1.25 Volts and +/-1 Volts (Bipolar)
Analog Input Resolution: 12 Bit
Analog Input Sample Rate: 50 kS/s (Aggregated)
Analog Output Channels: 2
Analog Output Range: 0 Volts to 5 Volts (Unipolar)
Analog Output Resolution: 12 Bit
Analog Output Update Rate: 10 kS/s
Digital I/O Channels: 16
Counter/Timer Inputs: 1
Counter Resolution: 32 Bit
Measurement Type: Voltage, Digital I/O, Multifunction
9. Columbus V-800+ USB GPS Data Logger Receiver
Feature
High sensitivity MTKII 3329 GPS chipset, 66ch, -165dBm, low power consumptionEPS technology with 2.0m accuracy and improve the drift
Supports up to 5Hz update rate, NMEA-0183 data protocol
Support data logging up to 500K track points, continuous track log of 25,000km and play track back on the map
Built-in backup battery to reserve system data for rapid satellite acquisition.
Description
The Columbus V-800+ is a professional and cost-effective GPS receiver with compact and stylish design, very low power consumption. V-800+ can be used for personal car navigation and other applications such as marine navigation, fleet management, tracking system, mapping and mobile devices applications V800+ has all the features of V800 plus data logging function. This unit does not have a built-in battery. The unit must be connected to a computer to work.10. Thomas 8045 Computer Data Acquisition System with USB Cable
Feature
Capture readings permanentlyRecords in intervals from 1 to 10000 seconds
Displays minimum and maximum readings
The software allows connecting up to eight instruments all running simultaneously on one computer
Multiple accessory extension cables expand cable length to 300 feet
