Finding the best epoxy putty wood suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Polymeric Systems 471070 Neutral Epoxy Putty, 1 oz Size
Feature
Will not shrink or pull away.Cured hardness and density are similar to that of wood.
Putty-like consistency eliminates drips and runs for a "no mess" application.
No tools required for use.
One hour after application can be drilled, sawed, sanded, filed, tapped, machined and painted.
Description
Combines the reliability and strength of 2-part epoxy wood repair materials in a single component. No measuring or stirring is necessary. Just pinch off a bit of the Quikwood "log" which contains both the filler and catalyst and knead it with your fingers. It's now ready to fill nail holes, dents, rebuild carving mistakes, restore rotten wood voids, or reshape a decorative piece. For exterior or interior use. It can be sawed, drilled, carved, sanded, painted and will not shrink. Working time of 3-6 minutes, cure time of 30 minutes.2. J-B Weld 40007 Wood Restore Premium Epoxy Putty Kit - 64 oz.
Feature
Hand mixable epoxy putty specially formulated to add structural strength to repair and rebuild wood quickly and easilyPolymer compound cures to the same density as wood to fill, build, reinforce or bond wood surfaces
Great for rotted or damaged wood, repairs to doors, windows and furniture, large cracks and major repairs
After 60 minutes, it can be sanded, tapped, machined, dripped, filed and painted
J-B Weld is proudly made in the USA
Description
J-B Weld Wood Restore Premium Epoxy Putty KitJ-B Weld Wood Restore Premium Epoxy Putty Repair Compound is a hand mixable epoxy putty specially formulated to repair and rebuild wood quickly and easily. When applied it adds structural strength to areas of damaged or rotted wood. It can be used to fill, build, reinforce or bond wood surfaces. After mixing, it forms a polymer compound that cures to the same density as wood. It may be used for exterior or interior applications; contains no solvents; will not rot, shrink, crack or pull away. After 60 minutes, it can be sanded, tapped, machined, dripped, filed and painted.
Great for:
Use on:
Instructions
1. Before applying, remove loose and rotted wood. J-B Weld recommends that you seal and solidify the rotted wood surfaces with J-B Weld Wood Restore Liquid Hardener or Premium Liquid Epoxy and then follow these easy steps.
2. With provided gloves on, scoop out equal amounts of the required amount of the Part A and Part B Premium Epoxy Putty. Mix ratio is 1:1.
3. Mix thoroughly by kneading with the spreader or gloved fingers until a uniform color appears.
4. Apply to surface to be filled or repaired. Press in the material firmly, sculpturing and contouring to the desired surface appearance. Allow to cure. Finish with sanding using medium followed by fine grit sandpaper.
*For best results dampen the material for easier mixing and application achieving a smooth appearance of the cured compound. Remove any excess material before hardening begins to reduce excess sanding and finishing.
J-B Weld is proudly made in the USA
3. Mohawk Finishing Products Epoxy Putty Stick (Natural Oak)
Feature
Easy to use and versatile Makes durable, permanent repairs8-10 minute workable time Fast curing, hardens in less than 20 minutes No shrinkage
Mold to any shape May be sanded, drilled, stained or painted
Excellent adhesive - wood to metal, wood to glass, and wood to ceramic
Description
EPOXY PUTTY-5 MINUTE The World's Strongest Putty! Bonds To: Plastic, Fiberglass, Brass, Nylon, Aluminum, Glass and Wood. Large defects can be filled with Mohawk's 5 minute Epoxy Putty without the need of any special tools like heating irons, alcohol torches, or knife ovens. The two part Epoxy Putty consist of a RESIN and HARDENER which are mixed in equal parts. This mixture dries in five minutes and is non-shrinking. Excellent for filling large holes, broken corners, etc. Mohawk's Wood Epoxy Putty Stick enables you to restore, rebuild and repair all kinds of wood and other hard surfaces. Due to the nature of this product, we cannot accept returns or refunds on any opened and/or used items.4. System Three 1-Quart SculpWood Moldable Epoxy Putty, 90301
Feature
It is easily sanded and will accept paint, screws and nailsSculptor paste is a 2-component, solvent free, epoxy resin Putty
It is waterproof, solvent free 1-quart kit
Description
Sculptor putty is the epoxy putty component of The End Rot system. Sculptor putty is a two component, solvent free, knead able epoxy resin putty. It is moldable, cartable, lightweight, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails. It is most commonly used in conjunction with system three Rot Fix, a low viscosity wood sealer and consolidate. The QuikKit is a package that consists of an outer cup that hold the resin and an inner cup that contains the hardener. Empty the hardener into the resin cup, mix and it is ready for use. Comes in 1-quart size.5. Star brite Epoxy Putty Stick 4 oz. Fast, Permanent Repair for Metal, Fiberglass, Wood, Plastic & Other Surfaces (87104)
Feature
Easy to use; just hand knead until color turns white and apply to damaged areaCan be sanded, drilled and tapped
Description
Makes permanent and emergency repairs on fiberglass, wood, metal and plastic.6. J-B Weld 8257 KwikWood Wood Repair Epoxy Putty Stick - 1 oz.
Feature
Hand-mixable epoxy putty formulated to repair and rebuild woodGreat for dry rot, knot holes, window and door frames, screw holes, furniture repair and more
Sets in 15-25 minutes, cures in 1 hour to a light tan color with the same density as wood
Contains no solvents, will not rot, shrink, crack or pull away and can be drilled, tapped, sanded, filed and painted
J-B Weld is proudly made in the USA
Description
J-B Weld KwikWood Epoxy PuttyKwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color.
Use on:
Instructions
1. Cut:Remove required amount of putty.
2. Mix: Thoroughly knead putty with fingers to a uniform color.
3. Apply: Press putty firmly to the surface to be repaired.
J-B Weld is proudly made in the USA
7. Quikwood Epoxy Putty, Dark, 1 Ounce
Feature
Will not shrink or pull away.Cured hardness and density are similar to that of wood.
Putty-like consistency eliminates drips and runs for a "no mess" application.
No tools required for use.
One hour after application can be drilled, sawed, sanded, filed, tapped, machined and painted.
Description
Combines the reliability and strength of 2-part epoxy wood repair materials in a single component. No measuring or stirring is necessary. Just pinch off a bit of the Quikwood "log" which contains both the filler and catalyst and knead it with your fingers. It's now ready to fill nail holes, dents, rebuild carving mistakes, restore rotten wood voids, or reshape a decorative piece. For exterior or interior use. It can be sawed, drilled, carved, sanded, painted and will not shrink. Working time of 3-6 minutes, cure time of 30 minutes.8. Mohawk Finishing Products Epoxy Putty Stick (Black)
Feature
Fast-curing (20 minutes)Moldable to any shape and will not shrink
Does not require heat
Bonds to plastic, fiberglass, brass, nylon, aluminum, glass and wood
Adheres wood to metal, glass, and ceramic
Description
Mohawk's Wood Epoxy Putty Stick enables you to restore, rebuild and repair all kinds of wood and other hard surfaces. Easy to use and versatile Makes durable, permanent repairs 8-10 minute workable time Fast curing, hardens in less than 20 minutes No shrinkage Mold to any shape May be sanded, drilled, stained or painted. Excellent adhesive - wood to metal, wood to glass, and wood to ceramic. EPOXY PUTTY-5 MINUTE The World's Strongest Putty! Bonds To: Plastic, Fiberglass, Brass, Nylon, Aluminum, Glass and Wood. Large defects can be filled with Mohawk's 5 minute Epoxy Putty without the need of any special tools like heating irons, alcohol torches, or knife ovens. The two part Epoxy Putty consist of a RESIN and HARDENER which are mixed in equal parts. This mixture dries in five minutes and is non-shrinking. Excellent for filling large holes, broken corners, etc.9. Gorilla 4200101-3 Epoxy (3 Pack), .85 oz, Clear
Feature
Strong, permanent, fast and gap-filling; Great for multiple surface applicationsBest for tough repairs requiring a durable bond, gap-filling and solvent resistance
Dries Clear; Ideal for clean, easy finishing
7 Minute Set; Plenty of repositioning time for the perfect fit
Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
Description
Gorilla takes epoxy to a new levelthe Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and wont harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare Your Work Area and the Surface: It is recommended to use Gorilla Epoxy in a well-ventilated area. Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. Important Cure Times: Set: 5 minutes to apply and position Handling: Allow to cure for 30 minutes undisturbed (no weight or handling) Final Cure: Allow 24 hours for load-bearing weight Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.10. Elmer's Carpenter's Color Change Wood Filler, 8 oz., White (E916)
Feature
Patented formula goes on purple and dries white when ready to sand, stain or paintStainable, paintable and sand able
Appeals to light Dyers
For interior use - Non-toxic formula
This is an aftermarket of generic part
Made in the USA
Description
Elmer's Carpenter's Color Change Wood Filler for interior use is ideal for repairing holes, dents, scratches, gouges and defects on any wood, wallboard, molding or painted surface. It goes on purple and dries white when it is ready to sand, stain or paint without shrinking or cracking. It has a similar tabor abrasion to Elmer's Interior Carpenter's Wood Filler. This patented Elmer's Carpenter's Color Change is made in the USA to appeal to most home Dyers. When it's time for a specific fix, Elmer's application-focused adhesives make it easy to find exactly the right Elmer's for the job!. For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.11. PC Products 84113 Rotted Wood Repair Kit with Water-Based Hardener, and Epoxy Paste and Putty
Feature
Kit includes a water-based wood hardener, epoxy paste, and epoxy putty with application tools to repair and protect small non-structural wood areas such as window sills, door frames, and decorative trimPC-Petrifier wood hardener to strengthen and seal rotted wood
PC-Woody two-part epoxy paste to repair damaged wood
PC-Lumber epoxy putty to replace missing wood
Application tools include mixing board, mixing stick, putty knife, and pair of latex gloves
Description
Kit contains emergency repair epoxy putty, strengthening liquid adhesive, wood-replacement epoxy paste and mixing accessories to repair, restore, and replace softened or rotted wood.12. 3M Bondo Home Solutions Wood Filler
Feature
Restores and replaces rotted or damaged sections of wood on doors, windows, fences, furniture, shutters and more.Once dried, it can be sanded, shaped, planed, drilled, routed or sawed just like wood.
1 Quart Can
Description
High quality, long lasting wood repairs
For high-quality, long-lasting repairs, choose Bondo Wood Filler. Medium brown in color when mixed, Bondo Wood Filler is stainable and paintable, making it perfect for almost any wood surface inside or outside of the home. Because it is a 2-part wood filler, Bondo Wood Filler will not shrink and cures fast. The filler can be easily sanded by hand or power tool in only 15 minutes and stained or painted in only 25 minutes, meaning your repair is complete the same day you started. Not only can you fill in small damage, but the strength of this 2-part wood filler allows you to rebuild rotted or missing pieces of wood and make repairs that last.
Bondo Wood Filler designed to
repair rotted wood (view larger).
repair rotted wood (view larger).
Numerous Applications: Designed for interior and exterior wood repair, Bondo Wood Filler has your home repairs covered.
- Window sills
- Furniture
- Exterior wood trim such as door frames and jambs, soffits and fascia
- Cabinets
- Fences and posts
- Decks
- Garage doors
- Wood floors and stairs
- Siding
- Exterior wood columns, doors and flower boxes Interior doors, baseboards and more
Step-by-step of how to repair rotted wood (view larger).
Same Day Repairs
Why wait hours or days to complete a repair? With Bondo Wood Filler, you can complete professional looking repairs in less than 30 minutes. The secret to a fast, permanent repair is in the 2-part technology. By mixing the filler with the cream hardener, provided with the filler, you can sand the wood filler in 15 minutes and stain or paint it in 25 minutes.
For more advanced repairs, Bondo Wood Filler can be applied in layers to rebuild rotted or missing pieces of wood. As a result, Bondo Wood Filler is water resistant and will not shrink. Not only can you save money, but you can make professional, great looking repairs.
Strength to Restore and Rebuild
Bondo Wood Filler can handle any wood repair ranging from the smallest to the largest of projects. Whether filling in minor furniture damage or rebuilding a missing piece of wood, the solution is Bondo Wood Filler. When the filler and hardener are mixed, a reaction occurs which allows the filler to chemically bond to the surface you are repairing. This technological advantage of a 2-part wood filler also allows the product to cure quickly and adhere permanently to the repaired surface. Unlike slower drying water or solvent based wood fillers that cure by evaporation, Bondo Wood Filler chemically cross links to cure for a faster, more durable repair.
The Bondo brand offers a complete line of fillers and accessories - putties and glazes, undercoatings, and tools - for many applications including automotive, household, marine, hobby, and many others. The products can be used to repair and restore aluminum, wood, concrete, brick, metal, fiberglass, stone and sheetrock.
13. PC Products 45770 PC-Lumber Moldable Epoxy Putty, 2 oz Stick, Tan
Feature
Epoxy putty for temporary repair on wood items such as furniture, frames, and moldingHand moldable without need for mixing or application tools
Continuous service temperature range from -20 to +200 degrees F
Provides work time of 15 minutes and cure for service time of 60 minutes
Formula contains real wood to help rebuild and shape damaged items
Description
PC-Lumber is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Lumber is formulated with real wood. Cut, mix and apply. PC-Lumber allows a working time of about 15 minutes and cures for service in 60 minutes. PC- Lumber will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Use to reform missing wood and bond wooden furniture, frames, moldings, screw holes, handles, knot holes and more.14. RTG Wood Repair Epoxy Putty (2-Pint Kit)
Feature
Two-part, moldable epoxy putty for repairing damaged wood or re-shaping & rebuilding missing wood.Easy-to-use 1:1 mix ratio. For interior and exterior use. Won't sag, shrink, or crack.
Cured material can be sanded, painted, and stained to blend in with the surrounding finish.
100% waterproof once cured, and as good as real wood at holding nails, screws, and other fasteners.
Available in a 2-Pint Kit and a 2-Quart. Each kit contains equal parts Part A (resin) and Part B (hardener).
Description
RTG Wood Repair Epoxy Putty is a super-strong, two-part, epoxy-based wood repair compound used to fix cosmetic defects and non-structural damage on windowsills, furniture, door frames, moldings, and wood trim quickly, easily, and best of all-permanently.To restore damaged or missing wood, simply knead 1 part resin and 1 part hardener together until mixed thoroughly, then mold and shape in place using tools or by hand. It's as easy as working with modeling clay, but dries hard, strong, and can accept screws, nails, & other metal fasteners. At 70F, RTG Wood Repair Epoxy Putty has a working time of 30 minutes, and is sandable in 6 hours. In addition to the ample working time and non-sagging formula, you'll really appreciate the no-VOC, no-odor formula that makes it ideal for indoor use. It's waterproof once it cures, so it's also great for outdoor use.
If the wood in the repair area is rotted, isolate and stop the rot first. RTG Wood Rot Repair Epoxy (sold separately) stops rot, while hardening and sealing the wood. Afterward, apply Wood Repair Epoxy Putty to reshape the surface. Compare to System Three Sculpwood, PC Products PC Woody Wood Repair Epoxy Paste, and Abatron WoodEpox. All RTG products are a great value, very easy to use, and 100% made in the USA.
