Finding the best rj45 tester lcd suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. Southwire Tools & Equipment M400TP Professional Data Cable Mapper
Feature
Easy-to-read LCD display with backlightPort cover protects RJ45 port from dust and debris
Rugged double-molded housing with snap-in remote
Identifies correct wiring, opens, shorts, reversals, miswired, split pairs, and Shielded cables
Description
Southwire m400tp professional data cable mapper easy-to-read LCD display with backlight. Port cover protects RJ45 port from dust and debris. Rugged double-molded housing with snap-in remote2. Fluke Networks MS2-100 Cable Tester
Feature
Displays cable length, wiremap, cable ID, and distance to fault on one screenDetects today's media services, including 10/100/1000 Ethernet, POTS, and PoE
Locates virtually any cable or wire pair with IntelliTone digital and analog toning
Tests all common media types, including RJ11, RJ45, Coax, with no adapters
Rubber over mold enhances grip and increases ruggedness
"Oversized" backlit LCD makes results crystal clear in any work environment
Description
Next generation MicroScanner streamlines voice/data/video cable and service testing. Revolutionary user interface makes testing fast, easy, and crystal clear. Everything cable technicians need to know, including available services (10/100/1000 Ethernet, Pots, PoE Voltage), cable length, wire map, cable ID and distance to fault all are displayed on one oversized backlit screen. Replace multiple tools by testing all RJ11, RJ45 and coax (F) media with no adapters. Built-in Intellitone digital and analog toning precisely locates virtually any cable or wire paireven on active networks. Ergonomic design of cable tester features sleek rubber over mold to enhance grip and ruggedness. Includes carry case.3. Tekit Multipurpose Network Ethernet LAN Phone Cable Tester Scanner RJ45 RJ11 Cat-5 NF-308
Feature
NF-308 LCD Display Telephone Network Ethernet LAN Phone Tester Multipurpose Cable Wire Tracker Length Scanner RJ45 11One person enough to complete cable continuity check.
Check wiring error in 5E, 6E, telephone line, coaxial cable, USB cable such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference.
Simple and easy use. Big screen to display test result clear.
NF-308 is composed of tester, receiver and remote identifier. It is provided with fluent appearance, excellent hand feel and considerate human-centered design. It owns three great functions of hunting, wire sorting and circuit status testing and the features of quickness and accuracy, thus, it becomes available tool for technicians in installation and maintenance of weak current system, such as, communication line, comprehensive wiring circuit, etc. It is widely applicable to telephone system, computer network, other metal wire circuit and other fields.
Description
- Display: Special 4 x 16 character big screen LCD lattice (valid visual field 61.6 x 25.2 mm)
- Type of cable tested: STP/UTP twin twisted cable, coaxial cable, telephone line
- Type of cable detected: 5E, 6E, telephone wire, coaxial cable, USB cable and other metal wires
- Ambient temperature in work: -10 oC ~ +60 oC
- Tester Port: Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), hunting RJ45 port (With RJ45), Remote identifier RJ45 port (R)
- The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line.
- Length Measurement of Twin Twisted Cable: Scope: 1 ~ 350M ( 3 ~ 200')
- Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft)(calibrating cable > 5 M)
- Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft).(AMP, AT&T Class 5 cable)
- Display: Meter or feet
- Length Calibration: User can set calibration factor by himself with a given length cable
- The length of calibrating cable is more than 5M
- Wire Sequence and Locating Cable Error: Check errors such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference
- Locating Cable: 8 Remote identifier test jacks (ID 1ID 8)
- Automatic Time-delay shut Off Time: The tester does not operate for 30 minutes
Package Includes:
- 1 x Main Tester
- 1 x Receiver
- 1x Adapter
- 1 x Earphone
- 4 x Cables
- 1 x Carrying Bag
4. Powstro Network LAN Length Cable Tester Meter 5E 6E SC8108 CAT5 RJ45 GRAY
Feature
EASY TO USE - Efficient, effective, reliable.A person is enough to complete cable continuity check and cable sequence.Indicates pair integrity of the cable.Measure length and pair with or without far-end recognizer.HIGH QUALITY & ONE YEAR WARRANTY - Auto time delay shut off.Comes with 1 far-end passive test jack.Far-end recognizer with prompt voice.Single board computer software watchdog design and reliable operation.
LOCATES THE WIRING OR CONNECTION ERROR - Measures cable length and determine the distance of open circuit and short circuit.Permits you to check wiring error in 5E/6E twisted cord network, coaxial cable and telephone line.
LIGHTWEIGHT & EASY TO CARRY - Self-checking function and automatically compensates any change in battery capacity or ambient temperature.Simple and easy to use, big LCD screen to display test results. Compact, lightweight, easy to carry and use.
LONG BATTERY LIFE - Applicable for open circuit, short circuit, jumper wire, reverse connection or cross-talk interference.Dynamically calibrates cable length and make length measurement as accurate as 97%.Portable unit with long battery life (wait-case or standby mode for over 50 hours).
Description
Type of Tester CableSTP/UTP twin twisted cable, coaxial cable, telephone line
Tester Port
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R)
(BNC and RJ11 converters (not included in the set), can be used to measure and check the continuity of coaxial cable and telephone line)
Length Measurement of Twin Twisted Cable
Scope: 1 to 350M (3 to 1,200 FT) calibration
Calibration accuracy
3% (0.5m or 1.5 ft) (calibrating cable > 5 M)
Shipment accuracy
5% (0.5m or 1.5 ft) (AMP, AT&T Class 5 cable)
Unit of Measurement
Display in meter (M) or feet (FT)
Length Calibration
User can set self-calibration factor by a given length cable.
The length of calibrating cable is more than 5M
Wire Sequence and Locating Cable Error
Check errors such as open circuit, short circuit, reverse connection, cross- over or cross-talk interference
Locating Cable
Included 1 far-end passive test jack
Automatic Time
Delay Shut Off Time; The tester is idle for 30 minutes
Powered by
4*1.5V AAA batteries (not included)
Working Ambient Temperature
-10 to 60
Size
8.2*18*3.8cm / 3.2*7.1*1.5"
Net Weight
0.21kg / 7.4oz
Product contain
1*Multi-Network Cable Tester
1*Far-End Test Jack
1*Instruction Manual
5. Monoprice Professional Coaxial, RJ-45, RJ-11/12, BNC, and USB Multifunction Tester with LCD Display
Feature
Tests RJ45, RJ11, USB, and BNC cablesMeasures RJ45 and BNC cable lengths
Checks for opens, shorts, cross connections, and crosstalk for RJ45, RJ11, and BNC cables
Accurately locates shorts and breakages
Memory and storage functions
Description
Professional Coaxial, RJ-45, RJ-11/12, BNC, and USB Multifunction Tester with LCD DisplayFeatures:
Tests RJ45, RJ11, USB, and BNC cables
Anti-jamming capability
Measures RJ45 and BNC cable lengths
Checks for opens, shorts, cross connections, and crosstalk for RJ45, RJ11, and BNC cables
Accurately locates shorts and breakages
Earphone permits use in noisy environment
Memory and storage functions
Transmitter Specifications:
LCD Screen Dimensions: 2.1" x 1.0" (53 x 25 mm)
Tone Frequency: 225 Hz
Tone Modes: 2 tones
Compatible Connectors: RJ11, RJ45, BNC, USB
Voltage Protection: 60 VAC, 42 VDC
Power Source: 9V battery
Dimensions: 7.3" x 3.1" x 1.3" (185 x 80 x 32 mm)
Receiver Specifications:
Tone Frequency: 225 Hza
Maximum Operating Current: Up to 70mA
Power Source: 9V battery
Dimensions: 8.6" x 1.8" x 1.1" (218 x 46 x 29 mm)
Remote Specifications:
Compatible Connectors: RJ11, RJ45, BNC, USB
Dimensions: 4.2" x 1.2" x 1.0" (107 x 30 x 24 mm)
6. Multifunction LCD Digital Wireless Network LAN RJ45 5E 6E Coaxial telephone line Phone Cable Tester Meter SC8108
Feature
Multifunction LCD Digital Wireless Network LAN RJ45 5E 6E Coaxial telephone line Phone Cable Tester Meter SC8108Description
The main function characteristics:
The connectivity test can be carried out, single cable
And can detect 5E, 6E coaxial cable and telephone line wiring fault, open circuit,short circuit, including: cross connection,
reverse connection and series wound
Localization and connection / connection error.
And measuring cable length, and location of the specific location of open circuitshort circuit
And the length of the cable dynamic calibration function, make the lengthmeasuring accuracy is as high as 97%
- easy to use, large screen display the test results stick out a mile
And easy to carry, long battery life (50 hours of standby time)
Automatic delay shutdown
And there are no length measurement and matched pairs were inserted on distalrecognizer can
And cable location, 8 distal passive testing socket (identification number ID1-ID8)
And the distal identification appliance audio prompt function
And self checking function, can automatically compensate the variation of the battery power, the influence of environmental
temperature change
And MCU software watchdog design, reliable operation
Length measurement of twin twisted cable:
Scope : 1350M (31,200 FT)
Calibration accuracy : 3% ( 0.5m or 1.5 ft) (calibrating cable > 5 M)
Shipment accuracy : 5% ( 0.5m or 1.5 ft) (AMP, AT&T Class 5 cable)
Display: M or FT
Length calibration: User can set calibration factor by himself by a given length cable. The length of calibrating cable is
more than 5m.
Working temperature: -10C to 60C
Powered by 4 AA batteires (NOT included)
Dimension: 180 x 80 x 40 mm
Package Inluded:
1 x Multi-Network Cable Tester
1 x Instruction Manual
