Finding the best nokia 5110 lcd module suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Reviews
1. YaptheS Red and Green 8448 LCD Module Blue Backlight Adapter PCB for Nokia 5110 Easy to use
Feature
Specifications:100% brand new and high quality
Male 4-pin To Female 4-Pin XLR Power Cable
Cable Length: approx. 100cm
Color: Black
Description
Features:1. 84*48 dot matrix LCD, can show 4 lines of characters
2. Use serial interface communicate with the master processor, the number of interface signal
line reduced greatly, only 8 signal lines including power and GND.
3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on.
4. Transfer rate up to 4Mbps, can full speed write display data without waiting time.
5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy to
install and replace.
6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small
7. Low power supply,the working current in normal situation is lower than 200A,and has
power-down mode
Connections:
1.RST--------- reset
2.CE---------- chip selection
3.DC---------- data/commands choice
4.DIN--------- serial data line
5.CLK--------- serial Clock Speed
6.3.3V-------- VCC
7.LIGHT------- backlight control terminal
8.GND--------- power negative
Specifications:
Color: Red, Green
For Nokia 5110 3V-5V
Module size: 45.2mm x 43.1mm
Package included:
1x LCD Module for Nokia 5110
2. Hariier LCD Screen Display Module White Backlight adapter PCB 3V-5V For Nokia 5110 New Z09 Drop ship
Description
LCD Screen Display Module White Backlight adapter PCB 3V-5V For Nokia 5110 New Z09 Drop ship3. LCD Screen Display Module White Backlight adapter PCB 3V-5V for Nokia 5110
Feature
MCU development board with 5110 LCD module compatible with the Nokia 3310RST:Reset
CE:Chip Select
DC:data / instruction selection
PCB Size:4.3*4.50cm/1.69"*1.77"
Description
Description:
100% brand new and high quality
PCB Size:4.3*4.50cm/1.69"*1.77"
MCU development board with 5110 LCD module compatible with the Nokia 3310 #REF!
RST:Reset
CE:Chip Select
DC:data / instruction selection
DIN:serial data line
CLK:Serial Clock Line
VCC:positive power supply(3.3V ,3.5V)
BL:backlight control
GND:power supply negative
Quantity:1Pc
Note:
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes(no retail package):
1Pc x LCD Screen Display Module White Backlight adapter PCB for Nokia 5110
4. MagiDeal 84*48 LCD Display Screen Module Red Backlight Adapter PCB for Nokia 5110
Feature
4-board LED, backlight, light uniformityPCB Size: 45 (mm) x 45 (mm)
The corners were positioning holes, along with two rows of the upper and lower connection port
Material: Metal
Description
Description:
4-board LED, backlight, light uniformity
PCB Size: 45 (mm) x 45 (mm)
The corners were positioning holes, along with two rows of the upper and lower connection port
Material: Metal
Wiring:
VCC - power input ( 3.3v )
GND - Ground
SCE - Chip Select
RST - Reset
D C - data / instruction selection
DN - Serial Data Line
CLK - Serial Clock Line
LED - backlit console
Drivers will be provided:
Nokia 5110 FOR 51 (keil c)
Nokia5110 FOR PIC (picc)
Nokia5110 FOR AVR (gcc)
Nokia5110 FOR STM32 (keil for arm)
Nokia5110 FOR MSP430
Nokia5110 FOR LPC2148
Package includes:
1xLCD Module
5. MagiDeal 8448 Nokia 5110 LCD Display Screen Module for Arduino
Feature
84 X 48 dot LCD,can show 4 lines of charactersUse serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.
Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small.
Low power supply,the working current in normal situation is lower than 200A,and has power-down mode.
Description
You will find what you want in Sports & Outdoors, Home & Kitchen, Beauty, Clothing, Health & Household, Tools & Improvement, Automotive Parts etc.
Description:
- 84 X 48 dot LCD,can show 4 lines of characters
- Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.
- Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
- LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small.
- Low power supply,the working current in normal situation is lower than 200A,and has power-down mode.
Specification:
- Power supply voltage: 2.7-3.3V,5V is OK, but part of the screen becomes black when tested
- Data interface level: 2.7-5V
- Backlight power supply voltage: highest 3.3V
- Installation diameter: 2mm
- Backlight: Blue
- RST--reset
- CE--chip selection
- DC--data/commands choice
- DIN--serial data line
- CLK--serial Clock Speed
- VCC--power supply 3.3V
- BL--backlight control terminal
- GND--power negative
Package Includes:
1 Piece LCD Module
2 Pieces Pin Header
6. LCD 1.44" Red Serial 128X128 SPI Color TFT LCD Display Module for Nokia 5110
Feature
5-15 days with tracking.Spike NOKIA 5110, perfect upgrade true color
Size: 1.44 inch SPI serial bus Resolution 128 * 128
1.44-inch screen with SPI serial backplane module, a minimum of only four IO-driven resolution 128 * 128
Package Include: 1pcs
Description
100% brand new and high quality 1.44-inch screen with SPI serial backplane module, a minimum of only four IO-driven resolution 128 * 128 Spike NOKIA 5110, perfect upgrade true color Size: 1.44 inch SPI serial bus Resolution 128 * 128 Package Include: 1pcs7. HONWEN 84X48 LCD Module White Backlight Adapter PCB for Nokia 5110 New S3
Feature
84X48 LCD Module White backlight adapter pcb for Nokia 5110 NEW S3Description
84X48 LCD Module White backlight adapter pcb for Nokia 5110 NEW S38. Value-Trade-Inc - Hot Sale Smart Electronics 84x48 84x48 5100 LCD Module With White Blacklight Adapter PCB LCD5100
Feature
100% Brand new and High quality.Electronic tool equipment Smart-family, Repair tools for the Smart family, General electronic components, Electronic circuit board... The product as described in the picture.
Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service.
80% conventional orders will be delivered within 15-20 days.
Please note that the products are only offered by the brand: Value.Trade.Inc. Other sales people is not reliable.
Description
Specification:
1. "LIGHT" linked with GND, the backlight to be lit.
2. Need you to compress the screen and PCB tighter, might got loose after the delivery.
3 Use a 3.3V controller, otherwise the display could be quite vague.
LCD5110 Module:
Power supply voltage:2.7V-3.3V,5V is OK,but part of the screen becomes black when tested
Data interface level:2.7-5V
Backlight power supply voltage:highest 3.3V
Installation diameter:2mm
Backlight:White
Document for Download:Data
1RST--------- reset
2CE------------chip selection
3DC-----------data/commands choice
4DIN-----------serial data line
5CLK------------serial Clock Speed
63.3V------------VCC
7LIGHT--------- backlight control terminal
8GND-----------power negative
Features:
84 X 48 dot matrix LCD,can show 4 lines of characters
Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.
Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
Low power supply,the working current in normal situation is lower than 200A,and has power-down mode.
Shipping Included:
1PCS*Nokia 5110 LCD Disply Module
9. Tostal 1pcs New Module Blue Backlight 8448 84x84 LCD Adapter PCB for Nokia 5110 for