When you want to find 1500 30a dc dc, you may need to consider between many choices. Finding the best 1500 30a dc dc is not an easy task. In this post, we create a very short list about top 10 the best 1500 30a dc dc for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 1500 30a dc dc:
Reviews
1. KNACRO 1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V New Electric Unit Modules Module
Feature
Power supply with double iron silicon aluminum 4 1.2MM pure copper wire and rao. 100V/210A low resistance power MOS, high power and high current input, suitable for high power LED motorsHave input MOS meter protection, don't worry about input after burn out the power supply.
When used in battery input low battery protection avoid battery discharge damage power supply module and a battery.
Thickening of the radiator and intelligent temperature control cooling fan.
Description
Module properties: non-isolated step-up module (BOOST)Input voltage: DC 10V~60V
Input current: 10~30V input voltage, maximum current 30A
31~60V input voltage, maximum current 25A
Quiescent current: 15 mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
Output voltage: 12~90V continuously adjustable
Constant range: 0.8~20A(0.3A
Temperature: -40~ + 85(ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150 KHz
Conversion efficiency: 92% ~ 97%
Low battery protection: yes
Input reverse polarity protection: yes
Enter the anti-reverse protection: yes
Short circuit protection: yes
Installation: 4 x 3 mm screw holes
Module size(L*W*H): 130 x 52 x 85 mm
Applications:
1.DIY a power supply, 12V can input and output can 12-50V adjustable.
2.The power supply for your electronic device, according to your system can set the output
3.As the power supply for your digital products supply.
4.DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books.
5.Solar panel regulator.
6.To the battery, rechargeable lithium batteries.
Note:
Output positive and negative can not be reversed, can not be short circuit.
Long time high current high power full load work should pay attention to ventilation and heat dissipation, in order to extend the life of the power supply.
Use battery, switch power supply, solar panels, generators and so on as the input source, the need to reduce the battery protection, otherwise it will damage the battery and power supply
Package Included:
1 x Boost Constant Current Module
2. 1500W 30A DC-DC Boost Converter DIY Step-up Boost Constant Stream Power Supply Module Board In 10-60V Out 12-90V Electric Unit Module
Feature
Input Voltage: DC10V to 60V; Output Voltage: 12V to 90V (adjustable, default is 19V);Max. Input Current: 30A(input voltage 10V to 30V) or 25A(input voltage 31V to 60V)The power supply module uses double sendust magnets winded with 1.2mm copper wires
Support reverse input protection with MOS so there is no worry about wrong input wire and burn out power supply
Low voltage protection will protect module and battery against damage from over-discharge when use a storage battery as input
Thickened heatsink and intelligent temperature control cooling fan dissipate heat better
Description
Walfront 1500W 30A DC-DC Boost Converter DIY Step-up Boost Constant Stream Power Supply Module Board In 10-60V Out 12-90V Electric Unit Module
Product Specification:
Input Voltage: DC10V to 60V
Max. Input Current: 30A(input voltage 10V to 30V) or 25A(input voltage 31V to 60V)
Quiescent Current: 15mA(will increase when convert 12V to 20V)
Output Voltage: 12V to 90V (adjustable, default is 19V) Max. Output Current: 20A (related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be. please enhance heat dissipation when current is over 15A)
Constant Current Range: 0.8A to 20A(+/-0.3A)
Reverse Input Protection: Yes (150A MOS)
Lower Voltage Protection: Yes (V8 to 50V adjustable, self-recovery)
Operating Temperature: - 40 to +85 (if temperature is too high, please enhance heat dissipation)
Frequency: 150KHz
Conversion Efficiency: 92% to 97%
Input Over-current Protection: Yes (automatically protect when input is more than 35A, and power supply voltage will not increase)
Short Circuit Protection: Yes(input 30A fuse)
Wiring Method: Terminals(please use large current copper wire)
Max. Output Power = Input Voltage*Max Current (If input 12V, the max output power=12V*30A = 360W)
Size:130 x 84 x 52mm / 5.11 x 3.3 x 2.04"
Package Includes:
1 x Module
Note:
1. Output wiring can not be reversed or short circuit.
2. If the module is connected to inductive load, the minimum input voltage should be higher(e.g. 24V) and maximum output power should be lower(e.g. 500W).
3. If a storage battery, switch power supply, solar panel or electric generator is used as input power source, the low voltage protection value should be adjusted lower, otherwise it might cause damage.
3. Westsell 1500W 30A DC-DC Boost Converter Step up Power Supply Module Constant Current DC10-60V 36v 48v to 10-30V 12v 24v
Description
1500W 30A DC-DC Boost Converter Step Up Power Supply Module Constant Current DC10-60V 36v 48v to 10-30V 12v 24v4. ILS - 1500W 30A DC-DC Boost Converter Step Up Power Supply Module Constant Current
5. SODIAL(R) 1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V New Electric Unit Modules Module
Feature
Power supply with double iron silicon aluminum 4 1.2MM pure copper wire and rao.DIY a power supply, 12V can input and output can 12-50V adjustable. As the car power supply for your laptop, PDA or a variety of digital products supply.
Have input MOS meter protection, don't worry about input after burn out the power supply.
When used in battery input low battery protection avoid battery discharge damage power supply module and a battery.
Thickening of the radiator and intelligent temperature control cooling fan.
Description
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration.SODIAL(R) 1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V New Electric Unit Modules Module
Module properties: non-isolated step-up module (BOOST)
Input voltage: DC 10V~60V
Input current: 10~30V input voltage, maximum current 30A
31~60V input voltage, maximum current 25A
Quiescent current: 15 mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
Output voltage: 12~90V continuously adjustable
Constant range: 0.8~20A(+/-0.3A)
Temperature: -40~ + 85 Celsius (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150 KHz
Conversion efficiency: 92% ~ 97%
Low battery protection: yes
Input reverse polarity protection: yes
Enter the anti-reverse protection: yes
Short circuit protection: yes
Installation: 4 x 3 mm screw holes
DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books.
Solar panel regulatorTo the battery, rechargeable lithium batteries.
Output positive and negative can not be reversed, can not be short circuit.
Use battery, switch power supply, solar panels, generators and so on as the input source, the need to reduce the battery protection, otherwise it will damage the battery and power supply
suitable for high power LED motors
Colour:red+silver
Material:plastic metal
size(L*W*H): 130 x 52 x 85 mm
Package Contents:1 x Boost Constant Current Module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
6. PEACE BIRD 1500W 30A DC-DC High Current Power Supply Module DC Constant Current Boost Voltage Converter Electric Booster Module Board 10V-60V 12V Step Up to DC 12V-90V with Cooling Fan
Feature
Built-in radiator and cooling fan to help heat dissipation quickly.Power supply with double iron silicon aluminum 4 1.2MM pure copper wire and rao. 100V/210A low resistance power MOS, high power and high current input, suitable for high power LED motors
Supports over current protection, short circuit protection and input reverse polarity protection, safe to use.
Supports Max. 20A putput current, if output current is over 15A, it needs to be enhanced the cooling.
Note: it is necessary to lower the battery protection voltage, no matter using the battery, switching power supply, solar panel, or generator etc as the input source, otherwise it will damage the battery and power module.
Description
This is a 1500W boost constant current module with high conversion efficiency. Supports MOS anti-reverse protection, and built-in radiator and cooling fan to help heat dissipation quickly, safe and reliable to use.When using the boost power supply, please pay attention to the following points:
1. The output polarity cannot be reversed or short circuit;
2. When using batteries as the input source, you must lower the battery protection, otherwise it will damage the battery and power supply;
3. Input power supply voltage must be above 10V;
4. When the power supply is used for the input power supply, the input power and the output voltage of the input power supply are the first to be unloaded; Then pick up the load. (Please ensure that the switching power supply has been working);
5. When the constant current mode is used to set the voltage, the constant voltage must be higher than the input voltage.Do not use the way of short circuit output current, and the circuit structure of the boost module can not be adjusted in short circuit way.
6. If the input voltage fluctuation range is lower than the set output voltage, then the output voltage is constant to ensure the input is lower than the output voltage.
Specifications:
Module name: 1500W boost constant current module
Module properties: non isolated boost module(BOOST)
Conversion efficiency: 92%-97%(The efficiency has an effect on input voltage, output voltage, current and pressure difference)
Installation: 4pcs 1.2mm column
Connection mode: Terminal blocks(Please use big current and pure copper wire)
Input voltage: 10-60V
Input current: 30A(10-30V input); 25A(31-60V input)
Static operating current: 15mA
Output voltage: 12-90V continuous adjustable(default output 19V)
Package List:
1 * 1500W Boost Constant Current Module
7. Baoblaze 1500W 30A DC-DC Boost Converter Step up Power Supply Module 48V to 60V
Feature
1.Over current protection: there is a certain range of error in the input over 35A,automatically reducing the output voltage.2.Short circuit protection: there is (input 30A fuse) double short circuit protection,more secure to use.
3.Input reverse polarity protection: there is (150A MOS tube to avoid this).
4.Three indicator lights: under voltage, over current, power indication, working state at a glance.
5.With constant current function, it can be used for boosting the battery car and charging the battery.
Description
Description:
- 1.Over current protection: there is a certain range of error in the input over 35A,automatically reducing the output voltage.
- 2.Short circuit protection: there is (input 30A fuse) double short circuit protection,more secure to use.
- 3.Input reverse polarity protection: there is (150A MOS tube to avoid this).
- 4.Three indicator lights: under voltage, over current, power indication, working state at a glance.
- 5.With constant current function, it can be used for boosting the battery car and charging the battery.
Specification:
- Material: Mixture
- Size:(Approx).21x21x8cm/8.3x8.3x3 Inch
- Module properties: non isolated boost module (BOOST)
- Working temperature: -40~+85 degrees
Package Includes:
1 Piece 1500W boost constant current module
Note:
1. the output polarity cannot be reversed or short circuit.
2. when using batteries as the input source, you must lower the battery protection, otherwise it will damage the battery and power supply
3. Input power supply voltage must be above 10V.
4. When the power supply is used for the input power supply, the input power and the output voltage of the input power supply are the first to be unloaded. Then pick up the load. (must ensure that the switching power supply has been working).
5. When the constant current mode is used to set the voltage, the constant voltage must be higher than the input voltage.
6. If the input voltage fluctuation range is lower than the set output voltage,then the output voltage is constant, it is to ensure that input is lower than the output voltage.
We have many years of experience in selling merchandise online, we are focus on providing best product and service to customers.
8. 187 Series Thermal Circuit Breaker, Panel Mount, 7036, 30A
Feature
30A DC Panel Mount circuit breaker combines switching and circuit protection into a single device"Trip Free" design cannot be held "ON" during fault current condition
Rated IP66 Waterproof
Max voltage: 48V DC, Interrupt capacity: 5000A @12V, 3000A @ 24V, 1500A @ 42V
Terminal Size: 5/16"-18
Description
187 - Series Thermal Circuit Breakers - Panel Mount30 Amp Circuit BreakerPN:7036Features:Combines switching and circuit protection into a single deviceAll components meet SAE J1171 external ignition protection requirementsClear, single lever operation"Trip Free" design cannot be held "ON" during fault current conditionWaterproofRecessed mounting holes for clean appearanceSelf-trimming case eliminates the need for mounting panels or trim bezelsRound case permits easy installation with standard sized hole sawLarge clearance around terminal studs accept heavy gauge wire lugsRobust 5/16 terminals provide high torque connectionsLarge lever with vertical/horizontal orientation provides indication of trip statusIgnition protected - safe for installation aboard gasoline powered boats SpecificationsCircuit Breaker Class:Type III - Switchable / Manual Reset - Trip FreeType:Thermally Responsive Bi-Metal BladeCase Material:Thermoset PolyesterVoltage Rating:48 Volts DC MaximumInterrupt Rating:5,000 Amperes @12 Volts DC3,000 Amperes @24 Volts DC1,500 Amperes @42 Volts DCOperating Temperature Range:-25C to ?9. Boost Voltage Converter, DROK 1500W Voltage Regulator Booster DC 10V-60V 12V Step Up to DC 12V-90V 24V 30A Power Supply Module High Power Volt Transformer Circuit Board with Cooling Fan
Feature
DROK boost voltage converter input voltage range is DC 10-60V, continuously adjustable output voltage range is DC 12-90V, max output current is 20A, more than 15A please enhance heat dissipation.Application: DIY a power supply, 12V can input and output can 12-50V adjustable; as the car power supply, charge for your laptop, PDA or a variety of digital products; Solar panel regulator etc.
Protection: the step-up power regulator is designed with input over-current protection, battery low voltage protection, input MOS reverse polarity protection, short circuit protection.
Speacial Design: the voltage transformer is equipped with thickening radiator and intelligent temperature control cooling fan.
Note: it is necessary to lower the battery protection voltage, no matter using the battery, switching power supply, solar panel, or generator etc as the input source, otherwise it will damage the battery and power module.
Description
DROK 1500W Boost Voltage Converter
Parameters:
Module type: non-isolated step-up module (BOOST)
Input voltage range: DC 10V~60V
Input current: 10~30V input voltage, maximum current 30A; 31~60V input voltage, maximum current 25A
Static operating current: 15 mA (when 12V step up to 20V, the higher the output voltage, the current will increase)
Output voltage: 12~90V continuously adjustable (default 19V)
Output current: 20A MAX, more than 15A please enhance heat dissipation
Constant current range: 0.8~20A (0.3A)
Temperature: -40~ + 85(if the ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150 KHz
Conversion efficiency: 92% ~ 97%
Protection: input over-current protection, battery low voltage protection, input reverse polarity protection, short circuit protection
Installation: 4 x 3 mm screw holes
Module size(L*W*H): 130 x 52 x 85 mm
Applications:
1. DIY a power supply, input 12V and output can be adjustable to 12-50V.
2. Charge for your electromobile.
3. As the car power supply, charge for your laptop, PDA or a variety of digital products.
4. DIY a notebook mobile power supply: with 12V big-capacity lithium battery pack, get your notebook on anywhere.
5. Solar panel regulator.
Package Including:
1 x Power Converter Module
10. TOOGOO(R) 1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V New Electric Unit Modules Module
Feature
Power supply with double iron silicon aluminum 4 1.2MM pure copper wire and rao.DIY a power supply, 12V can input and output can 12-50V adjustable. As the car power supply for your laptop, PDA or a variety of digital products supply.
Have input MOS meter protection, don't worry about input after burn out the power supply.
When used in battery input low battery protection avoid battery discharge damage power supply module and a battery.
Thickening of the radiator and intelligent temperature control cooling fan.
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) 1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V New Electric Unit Modules Module
Module properties: non-isolated step-up module (BOOST)
Input voltage: DC 10V~60V
Input current: 10~30V input voltage, maximum current 30A
31~60V input voltage, maximum current 25A
Quiescent current: 15 mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
Output voltage: 12~90V continuously adjustable
Constant range: 0.8~20A(+/-0.3A)
Temperature: -40~ + 85 Celsius (ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150 KHz
Conversion efficiency: 92% ~ 97%
Low battery protection: yes
Input reverse polarity protection: yes
Enter the anti-reverse protection: yes
Short circuit protection: yes
Installation: 4 x 3 mm screw holes
DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books.
Solar panel regulatorTo the battery, rechargeable lithium batteries.
Output positive and negative can not be reversed, can not be short circuit.
Use battery, switch power supply, solar panels, generators and so on as the input source, the need to reduce the battery protection, otherwise it will damage the battery and power supply
suitable for high power LED motors
Colour:red+silver
Material:plastic metal
size(L*W*H): 130 x 52 x 85 mm
Package Contents:1 x Boost Constant Current Module
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
