We spent many hours on research to finding sheetrock tools depth, reading product features, product specifications for this guide. For those of you who wish to the best sheetrock tools depth, you should not miss this article. sheetrock tools depth coming in a variety of types but also different price range. The following is the top 16 sheetrock tools depth by our suggestions:
Reviews
1. QWORK 1-5/8" to 8" (40 -200mm) Adjustable Hole Cutter Hole Saw for Recessed Lights Ceiling Speakers Vent holes on Sheetrock Drywall Plaster Ceiling Tile Soft Acoustic Tile Plastics Wood and Plywood
Feature
1) Adjustable twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes in ceilings, walls and floors, Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides2) This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one carpenter pencil, one 2m tape measure and a durable storage case
3) Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application
4) Two blades counter balance the cutter for low vibration. 2 sets of user replaceable blades: High Speed Steel blades for wood, plastics, acoustic tile, laminates, rubber; Tungsten Carbide blades for Sheetrock, drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF
5) One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decoraters, trademen, professionals and DIY home owners for recessed lights, ceiling speakers, vent holes and other hole cutting application
Description
Adjustable hole cutter kit
Cutting hole diameter: 1-5/8" to 8" (40mm - 200mm)
Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides
Shank: 3-flat shank
Infinite adjustment and measure bar is marked in inches and metric system
Used for recessed lights and ceiling speakers installation hole cutting, skylights, vent holes cutting
Application materials: Sheetrock, Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and Plywood
User Instruction
It requires a hand drill with a 3/8"(10mm) or larger chuck to cut holes from 1-5/8"(40mm) to 8"(200mm) in diameter and materials up to 3/4"(19mm) thick from one side, 1-1/8"(30mm) thick from two sides
Caution
* When cutting into walls, floors or ceilings, always check to ensure that no electric cables or water pipes etc are in the vicinity of the proposed cut
* Always keep the cutting blades sharp
* Do not use undue force, or too great a drill speed, suggested cutting speeds
Hole Diameter(mm) Drill Speed(RPM)
40 - 49 --------------- 800
50 - 69 --------------- 600
70 - 89 --------------- 400
90 - 119 -------------- 200
120 -180 -------------- 100
* Ensure the cutting blade holders are tight before use
* Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker
* Screw the wing nut on to the threaded end of the spindle so that that assembly is secure
* As with any new tool, always test on a scrap piece of material to get familiar with the tool
2. Excel Blades K9 Retractable Utility Knife, Standard Size Heavy Duty Metal Box Cutter Knife
Feature
Heavy duty, versatile utility knife with a standard size metal body perfect for cutting wood, sheetrock, and more.Strong metal frame with adjustable depth allows for versatility and comfort
Retractable blade mount can support any 2, 3, or 4 notch utility blades
Includes (1) Heavy Duty Utility Knife with (3) #92 Deep Hook Utility Blades
Description
Heavy duty, versatile utility knife with a standard size metal body perfect for cutting wood, sheetrock, and more. With a strong metal frame with adjustable depth allowing for versatility and comfort. The retractable blade mount can support any 2, 3, or 4 notch utility blades. Includes (1) Heavy Duty Utility Knife with (3) #92 Deep Hook Utility Blades.3. XL-Arbor Kit for Hole SawsAdapts Hole Pro shields for use with any hole saw, for X-model adjustable hole cutters. XL Arbor adjusts cutting depth control - hole cuts easy-SHIELD NOT INCLUDED
Feature
XL-Arbor Hole Saw Adapter works with all Hole Pro shields and any hole sawFor all "-20 and 5/8"-18 thread hole saws with up to 2-1/2" (60mm) cutting depth
Includes: Tensioning spring, Release bar, Hex wrench, HSS pilot bit,
Includes: 2 hole saw spacer discs, and sturdy nylon storage pouch
REQUIRES: Shield & Orange Knob from the Hole Pro X-model
Description
Order Hole Pro HP1168-71 for XL Shield Kit and XL Arbor kit together *** XL Arbor REQUIRES SHIELD from any Hole Pro X model adjustable kit*****The Hole Pro XL Arbor Kit is the perfect addition to the Hole Pro adjustable hole cutters kits. This arbor works with any -20 or 5/8-18 thread mount hole saw with cutting depths up to 2-1/4 inch (60mm). This brings all the benefits of the Hole Pro kit ball bearing mounted ABS composite dust shields to jobs where a special purpose hole cutter is needed to cut holes in ceramic tile, stone, thick lumber and laminate, asbestos tile, plaster, stucco, plastic resins, fiber-reinforced composites, OSB, TGI, or stainless steel. The clear ABS composite plastic shield (the same material used for hockey helmets) traps all the dust and shavings, and with its ball bearing support for the XL-Arbor it is easy to make a straight in cut even when using a hand held drill. The orange adjustment knob (from the Hole Pro adjustable hole cutter kit) can be used to limit the depth of the cut of the hole saw to lessen the chance of accidentally cutting a hidden wire or pipe in a wall, ceiling, or floor. The Hole Pro adjustable hole cutters can be used to cut holes from 1-7/8 up to 17 inches in diameter and to a depth of 1-1/8 inches in a wide range of materials. With the addition of the XL-Arbor the Hole Pro shields can be used with hole saws to cut and even wider range of materials and to cut to depths of up to 2-1/4 inches while still providing the benefits of dust suppression, straight cuts, and depth control. The kit in its sturdy nylon storage pouch is small enough to fit inside many of the Hole Pro hole cutter kits for ready use when needed.4. Leviton 47605-42S 42-Inch Vented Premium Hinged Structured Media Door, White
Feature
Cutout pattern in bottom accommodates the same AC power modules and DC power supplies as the 21-Inch and 28-Inch enclosuresMounting slots on the enclosure simplify adjustment for different sheetrock depths
Sheetrock depth marks (1/2", 5/8", 3/4") on the enclosure simplify alignment
Lance slots provide clean cable management within the enclosure
Self-healing foam grommets protect cable bundles and prevents dust from entering the enclosure
Description
The 42-Inch Structured Media Center enclosures make running cable and managing media both simple and cost-effective. Designed to provide a central distribution point for home or small office technologies, the enclosures accommodate the distribution of voice, data, video, audio, security, and control applications. 42-Inch Structured Media Premium Hinged Door, Vented, White.5. Hole Pro X-305 Pro Twin Blade Hole Saw Kit: Adjusts to cut all size holes between 1-7/8" to 12" Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades
Feature
Twin blades for faster/smoother cutting, strong shield traps 100% dust & control cutting depthUser replaceable High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth
Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
14" OD - Adjusts infinitely for holes 2" to 12", Shield turns drill into portable drill press to use anywhere
Complete kit - add your 1/2" drill chuck - Needs power of hole saws so bigger holes easily cut
Description
One hole saw kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. Infinite adjustment 1-7/8" to 12" for all recessed light cans and most ceiling speakers. Kit includes pro grade adjustable hole cutter, ball bearing mounted ABS shield with soft silicon rubber gasket to trap the dust and shavings, user replaceable sets of both High Speed Steel and Tungsten Carbide blades, hex wrenches, and sturdy carry case. Shield keeps cutter straight and cutter has adjustment knob to limit depth of the cut - perfect for cutting holes in walls or ceilings to avoid accidental cutting of wires or pipes. Available vacuum adapter for connecting shop vac where there is asbestos or lead paint. Perfect for installing recessed lights, skylights, ceiling speakers, fans, ducts or providing access holes for repairs. Kit includes user replaceable High Speed Steel blades for wood, plastics, acoustic tile, tongue & groove, laminates, rubber, & Tungsten Carbide blades for drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF. Twin blades for faster cutting and perfect balance. No need for balance bars which can break off inside other cutters. Needs the power of a hole saw so smaller and lighter cordless drills can be used and cut more holes per battery charge. Cut holes in plywood up to 9" in diameter with 18 volt cordless drill. Do not use with stud drills. Cut holes in ceilings in less time than it takes to trace the circle and begin cutting with other tools. Like all Hole Pro Power Series kits the safety dust shield (14" OD) can be used with the Hole Pro XL-Arbor kit to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as the adjustable hole cutters. ** NOT MADE FOR USE WITHOUT PILOT BIT** does NOT include additional any extra hole saw or vacuum adapter ** Deeper hole saws can be used with HP1168 Arbor Adapter with shield **6. Hole Pro X-230+ Pro Twin Blade Hole Saw Kit: Adjusts to cut all holes between 1-7/8" to 9-1/4" Electricians Installing Recessed Lights: Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie
Feature
Adjustable twin blade hole cutter for cutting 1 7/8" to 9-1/4" holes in ceilings, walls and floorsUser replaceable High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth
Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
Includes new shaft threaded for using Blue Boar carbide grit recessed light hole saws
11" OD - Uses 1/2" drill chuck - Needs power of hole saws so bigger holes easily cut
Description
One hole saw kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. Infinite adjustment 1-7/8" to 9-1/4" for all recessed light cans and most ceiling speakers. Kit includes pro grade adjustable hole cutter, ball bearing mounted ABS shield with soft silicon rubber gasket to trap the dust and shavings, user replaceable sets of both High Speed Steel and Tungsten Carbide blades, hex wrenches, and sturdy carry case. Shield keeps cutter straight and cutter has adjustment knob to limit depth of the cut - perfect for cutting holes in walls or ceilings to avoid accidental cutting of wires or pipes. Available vacuum adapter for connecting shop vac where there is asbestos or lead paint. Perfect for installing recessed lights, skylights, ceiling speakers, fans, ducts or providing access holes for repairs. Kit includes user replaceable High Speed Steel blades for wood, plastics, acoustic tile, tongue & groove, laminates, rubber, & Tungsten Carbide blades for drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF. Twin blades for faster cutting and perfect balance. No need for balance bars which can break off inside other cutters. Needs the power of a hole saw so smaller and lighter cordless drills can be used and cut more holes per battery charge. Cut holes in plywood up to 9" in diameter with 18 volt cordless drill. Do not use with stud drills. Cut holes in ceilings in less time than it takes to trace the circle and begin cutting with other tools. Includes new 5/8" threaded shaft end for using the hole cutter with standard carbide grit holes saws up to 1-1/4 inch cutting depth have the same dust control and depth control as the adjustable hole cutters. ** NOT MADE FOR USE WITHOUT PILOT BIT** does NOT include additional any extra hole saw or vacuum adapter ** Hole Saws Deeper than 1-/14" can be used with HP1168 Arbor Adapter with shield **7. Ryobi P531 One+ 18V Cordless Speed Saw Rotary Cutter with Included Bits (Battery Not Included / Tool Only)
Feature
All one+ tools work with all one+ batteriesAdjustable depth setting for making cuts in different materials
Perfect for tackling a variety of cutting applications
30 percent more compact design enhances user comfort while cutting (compared to previous model)
Accepts 1/8 in. And 1/4 in. Bits for a variety of cutting applications
Description
Ryobi introduces the new and improved 18-Volt one+ speed saw rotary cutter, an excellent choice for a variety of cutting applications. The saw accepts 1/4 in. And 1/8 in. Bits and features a depth setting that can be adjusted for making cuts in different types of materials. Includes the speed saw rotary cutter, 1/8 in. Plywood bit, 1/8 in. Drywall bit, 1/4 in. Collet, 1/8 in. Collet adaptor, wrench and operator's manual. This tool is backed by a 3-year warranty. See below for additional details.8. HolePro T-200 1-5/8" to 8" Adjustable Hole Cutter for Recessed Lights Speakers. Twin High Speed Steel HSS Blades use Drill Power of a Hole Saw to Cut Sheetrock Plastic Soft-woods NO PLYWOOD/PLASTER
Feature
HSS Blades NOT REPLACEABLE but can be resharpened -NOT FOR USE in Drill PressTwin blades for perfect balance - no bars to change or threads to break off
Ball bearing mounted strong ABS shield with soft silicon gasket dust seal
11" OD Shield - Cuts perfect holes from 1-5/8" to 8" - replacing hole saw kits with multiple saws
Max cut depth: 1": cuts sheetrock, wood (NO PLYWOOD or PLASTER), melamine, acrylic sheet, soft acoustic tile, plastics
Description
** DRILL NOT INCLUDED *** ***NOT FOR PLASTER *** NOT FOR ENGINEERED WOODS SUCH AS PLYWOOD OR OSB OR MDF*** HSS BLADES NOT REPLACEABLE *** Great for DIYer cutting holes in soft sheetrock for recessed light cans and speakers. Adjustable hole cutter with tough ball bearing mounted ABS shield with silicon gasket dust seal. High speed steel blades cut through sheetrock and have a thin kerf profile to cut through wood, plastics, and delicate acoustic tile. Requires only a hand drill with a 3/8" or larger chuck to cut holes from 1-5/8 inches to 8 inches in diameter and materials up to 1 inch thick. Infinite adjustment and measure bar is marked in inches. Put one blade holder at "6" and the same with the opposite blade holder and the tool cuts a 6" diameter hole. Shield catches all the shavings and dust and holds the cut section. Does away with the mess and need for drop cloths. ABS shield is strong enough to stand on and with its silicone rubber gasket is safe to use on any surface. Shield remains in place and the internal bearing allows the adjustable hole cutter to spin independent of the shield. Orange knob makes it simple to limit the cutting depth to reduce risk of cutting wires and pipes behind the sheetrock or paneling. Unlike single blade adjustable hole cutters there are no balance bars to change and nothing to break off and make the tool useless. No wobble as with single blade hole cutters so holes are perfectly round even when cut into soft sheetrock. *** NOT FOR USE IN DRILL PRESS*** Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker. As with any new tool, always test on a scrap piece of material to get familiar with the tool**** NOT FOR USE with PLASTER, or PLASTER type materials, including button board sheet rock, gypsum, etc.9. Leviton 47605-21E 21-Inch Structured Media Enclosure, White
Feature
Cutout pattern in bottom accommodates the same AC power modules and DC power supplies as the 28-Inch and 42-Inch enclosuresMounting slots on the enclosure simplify adjustment for different sheetrock depths
Sheetrock depth marks (1/2", 5/8", 3/4") on the enclosure simplify alignment
Lance slots provide clean cable management within the enclosure
Self-healing foam grommets protect cable bundles and prevents dust from entering the enclosure
Description
21' Structured Media Enclosure10. Leviton 47605-21S 21-Inch Vented, Structured Media Premium Hinged Door, White
Feature
Cutout pattern in bottom accommodates the same AC power modules and DC power supplies as the 28-Inch and 42-Inch enclosuresMounting slots on the enclosure simplify adjustment for different sheetrock depths
Sheetrock depth marks (1/2", 5/8", 3/4") on the enclosure simplify alignment
Lance slots provide clean cable management within the enclosure
Self-healing foam grommets protect cable bundles and prevents dust from entering the enclosure
Description
21' Structured Media Premium Hinged Door, Vented.11. DEWALT DW272 6.3 Amp Drywall Screwdriver
Feature
Soft grip handleTwo-finger soft grip trigger switch
Metal gear housing
Metal gear housing for jobsite durability and increased reliability
Depth-sensitive, set and forget-nosepiece for consistent fastener depth
Rubber grip and two-finger trigger for increased comfort and greater control
Helical-cut steel, heat-treated steel gears for long life and durability
Lightweight with excellent ergonomics
Description
Lightweight with variable speed reversing, excellent ergonomics, metal gear housing for jobsite durability and increased reliability, depth-sensitive nosepiece for consistent fastener depth, rubber grip and two-finger trigger for increased comfort and greater control, heat treated steel gears for long life and durability. Specs: no load speed 0-4,000RPM, standard clutch, 81 in/lbs max torque, max fastener size #8, weighs 3.1lbs.12. Walboard Tool 54-014 6 Count Drywall Repair Clips
Feature
Drywall repair clipsRepair large holes or damaged areas in drywall
Professional quality repairs
Fits both 1/2" and 5/8" drywall panels
Contains 6 clips and 12 screws
Description
54-014 Features: -Drywall repair clips. -Repair large holes or damaged areas in drywall. -Professional quality repairs. -Carded. Generic Specifications: -Contains 6 clips and 12 screws. Generic Dimensions: -Fits both 1/2'' and 5/8'' drywall panels. Dimensions: Overall Length - End to End: -7 Inches. Overall Width - Side to Side: -1.38 Inches. Overall Depth - Front to Back: -4.5 Inches. Overall Product Weight: -0.38 Pounds.13. all-sun Wood Stud Finder Electronic Sensor Wood Stud / Metal Detector / AC Electrical Scanner 3 in 1 Multi-Scanner
Feature
Power supplied by 1 piece 9V (6F22) battery. (Battery included in the package)3 in 1 mutiscanner can be used to detect and locate stud, metal, AC wires .
Wood stud of 30*30mm:18mm;Iron pipe of 25mm:30mm;
When detects an object, the spotlight appears and mark in the groove position.
LCD and sound signal indicate findings.
Description
This unit is an advanced detector.It can detect and locate metal, AC voltage and stud.
In addition. It can be used in construction, fitment, etc.
It can be used to detect and locate stud,metal and ac voltage.
User can detect any material before drilling,cutting,or nailing with this handy auto calibrated detector.
Key Features
Find the stud center
Find wood and metal studs
AC scanning to trace hot wire
Metal scanning for finding nail, pipe, rebar, and other hidden metallic object.
Auto power off
Applications
This unit can be used when you want to do the following items: Hang mirror, picture, cabinet, and shelves securely.
Install grab bar, ceiling fan and chandelier.
Find metallic pipes in concrete.
Find electrical box, exhaust vent, conduit, rebar and ducting.
Trace hot wires behind ceiling, floor and wall.
Specification
Detection depth
Stud mode Wood stud of 30*30mm:18mm
Metal mode Iron pipe of 25mm:30mm
Voltage mode Typical depth of 50mm for 90 to 250V at 50 to 60Hz.
Operation condition -7 to 40 below 75% RH
Storage condition -20 to 50 below 85% RH
PLEASE NOTE: Detection depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc.
The TS79 works best on sheetrock walls and plank wall. It's not suitable for plaster walls and concrete walls.
14. Leviton 47605-28S 28-Inch Vented Premium Hinged Structured Media Door, White
Feature
Cutout pattern in bottom accommodates the same AC power modules and DC power supplies as the 21-Inch and 42-Inch enclosuresMounting slots on the enclosure simplify adjustment for different sheetrock depths
Sheetrock depth marks (1/2", 5/8", 3/4") on the enclosure simplify alignment
Lance slots provide clean cable management within the enclosure
Self-healing foam grommets protect cable bundles and prevents dust from entering the enclosure
Description
The 28-Inch Structured Media Center enclosures make running cable and managing media both simple and cost-effective. Designed to provide a central distribution point for home or small office technologies, the enclosures accommodate the distribution of voice, data, video, audio, security, and control applications. 28-Inch Structured Media Premium Hinged Door, Vented, White.15. USG Sheetrock 'The Dimpler' Drywall Screw Setter Bit - Reversible with Clutch
Feature
#2 Phillips bit sinks and sets screws to perfect finish depth.Automatic clutch release eliminates tear-out of screws in drywall and stripping of screw heads and bits.
Replaceable Phillips bit tip can be changed when worn. No need to replace the entire tool.
Reversible with turn-to-lock feature for screw removal.
Made by USG Sheetrock - the Leading Brand in Drywall Hand Tools
Description
Sheetrock Dimpler Drywall Screw Setting Tool - #2 Phillips The Dimpler screw setter bit is pre-set to countersink screws to the perfect depth in drywall. Automatic clutch release eliminates drywall tear-out. The Dimpler is reversible with a quick push-in, turn-to-lock feature for screw removal. Features:- Automatic clutch release eliminates drywall tear-out
- Pre-set to drive screws to perfect depth
- Reversible, with push-in, turn-to-lock feature
- Can be used to install or remove drywall screws
16. Zeroyoyo 10pcs Plasterboard Drywall PH2 Dimpler Screw Setter Phillips Screwdriver Drilling Bits Holder Magnetic Power Driver Bit
Feature
PH2 bits for drywall screwsAutomatically sets screws to proper depth in drywall
These are designed to be used with any power drill or cordless drill
Includes depth stop to limit screw penetration & damage to board
Total Length: Approx. 25mm/ 0.98"
Description
PH2 bits for drywall screws
Automatically sets screws to proper depth in drywall
Shock-resistant tool steel
Heat-treated to resist breakage
These are designed to be used with any power drill or cordless drill
Includes depth stop to limit screw penetration & damage to board
Installs drywall screws easily
Total Length: Approx. 25mm/ 0.98"
Package Included:10 x Drywall Plasterboard Dimpler
