When you want to find silicone molding kit, you may need to consider between many choices. Finding the best silicone molding kit is not an easy task. In this post, we create a very short list about top 9 the best silicone molding kit for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 9 silicone molding kit:
Reviews
1. Ecoflex 00-30 Super Soft Platinum Silicone - Trial Unit
Feature
Mix Ratio: 1A:1B by volume or weightPot Life: 45 minutes - Cure Time: 4 hours
Shore 00-30 Hardness
Cured rubber is very soft, very strong and very "stretchy", stretching many times its original size without tearing and will rebound to its original form without distortion.
Ecoflex Rubbers are water white translucent and can be color pigmented with Silc-Pig pigments for creating a variety of color effects.
Description
Ecoflex Rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex Rubbers are mixed 1A:1B by weight or volume and cure at room temperature with negligible shrinkage. Rubber also cures without a "tacky" surface. Low viscosity ensures easy mixing and de-airing, or you can choose to mix and dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very "stretchy", stretching many times its original size without tearing and will rebound to its original form without distortion. Ecoflex Rubbers are water white translucent and can be color pigmented with Silc-Pig pigments for creating a variety of color effects. Ecoflex 5 - Shore 5A hardness (available only in 400 ML cartridges) Ecoflex 00-50 - Shore 00-50 hardness (below the Shore A scale) Ecoflex 00-30 - Shore 00-30 hardness Ecoflex 00-20 - Shore 00-20 hardness Ecoflex 00-10 - Shore 00-10 hardness (extremely soft)2. Smooth-On Rebound 25 Brush On Trial Unit Platinum Silicone Moldmaking Rubber
Feature
Easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any modeRebound rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
4 thin layers are all that is necessary to make a flexible, strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.)
Advantages Over Urethane Brush-On Rubber: (a) Rebound will not stick to most surfaces, so surface preparation is minimal, (b) Two liquids that mix easily together, (c) stands up better to production casting of resins and low temperature melt metal alloys and (d) has a long library life.
Will not work with modeling clays containing sulfur under any circumstances.
Description
Rebound 25 is an easy-to-use platinum-cure silicone rubber that self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound 25 can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a soft, flexible rubber. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc.3. Smooth-Cast 300 Liquid Plastic Compound - Trial Unit
Feature
Ultra-low viscosity casting resin with bright white colorVacuum degassing is not necessary to yield castings that are virtually bubble free.
Pot Life: 3 minutes; Cure Time: 10 minutes
Shore 70D
Mix Ratio: 1A: 1B by Volume
Description
Smooth Cast 300 is a liquid plastic ,ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. It offers the convenience of a one to one mix ratio (by volume). 3 minute pot life: 10 minute demold time: Mixed viscocity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable. Read MSDS before use - for more information visit www.smooth-on.com4. Polly Plastics Silicone Molding Putty - 1/2 Lb.
Feature
MAKE YOUR OWN MOLDS THE EASY WAY - Simply knead equal parts of A and B together to form strong, flexible, reusable molds with excellent details. No liquids to mix together, no release agents required, no mold boxes or other equipment required.MAKE YOUR OWN REUSABLE MOLDS THE FAST WAY - Mixed putty sets up in 4 minutes and you can de-mold in only 30 minutes. High heat range up to 450 F.
TONS OF USES - Ideal for small molds for small impression molding, soap molds, candle molds, jewelry making and repair, antique furniture repair and other small object casting.
CAST MANY TYPES OF MATERIALS - Moldable plastics, waxes, clays, urethane and epoxy resins, plaster and even some low melt metals.
NON-TOXIC & ODOR FREE - Made in the USA. Safe to use. 100% satisfaction guarantee on all our products.
Description
Make your own Reusable Molds - the Fast and Easy way
Polly Plastics Silicone Mold Putty is an easy way to make fast reliable molds that you can re-use multiple times. Just knead equal amounts of A (white) and B (blue) together and create a silicone mold by forming the putty around the object you want to replicate. Use it for soap molds, candle molds, antique furniture repair, small impression molding, jewelry making and repair, and other small object casting. You can cast many types of materials in your finished mold including moldable plastics, waxes, clays, urethane and epoxy resins and plaster.
Fast Curing and Durable
Our putty is non-toxic and odor free. It will handle heat up to 450 F. You have 4 minutes of working time and you are able to de-mold in 30 minutes. Self-releasing - no mold release agent required for most applications. Long shelf life, no shrinkage. Not intended for food contact applications.
This package contains .25 lbs. of Part A and .25 lbs. of Part B. Made in USA. Complete instructions. Keep out of reach of children.
Start building! Order your Polly Plastics Silicone Molding Putty today. Your satisfaction is our top priority so we offer a money back guarantee on all our products, no questions asked.
5. Alumilite Amazing Mold Putty Kit, 0.66-Pound
Feature
Make your own molds for resin, food, soap, wax, clay and more with this amazing mold puttyIt is quick, easy and safe
The entire process takes less than twenty-five minutes
It is food grand and FDA compliant
It requires no equipment, cups or stir sticks
Easy to use by hand mixing 2 equal amounts of the yellow and white putty and cures within 20 minutes that gives users a flexible rubber mold with exact detail
Description
Alumilite Amazing Mold Putty Kit, 0.66-Pound6. Environmental Technology 1/2-Pound Kit Casting' Craft Easymold Silicone Putty
Feature
Easy to use, 3-minute working time, 25-minute cureIdeal for small molds, excellent detail from original
Strong, flexible, reusable molds
High Heat range, up to 400-Degree F
Self releasing, no mold release agent required for most applications.
Description
Easymold silicone putty is ideal for a wide range of impression type mold applications, including castin'craft clear casting resin, easycast clear casting epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. Easymold is an easy to use, odor free, non-toxic, fda compliant - food grade, two component silicone putty.7. Mold Star 15 SLOW Moldmaking Silicone Rubber - Trial Unit
Feature
Platinum Silicone Mold Making Liquid Silicone KitNo degassing necessary. 50 Minute cure allows bubbles to escape easily
15+ year shelf life of cured mold. One mold yields several castings
Easy! 1 to 1 Mix Ratio
Non-Toxic Cured Silicone. Health Rating of a Crayola Crayon!
Description
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers.MIX RATIO: 1:1 by volume; POT LIFE: 50 mins; DEMOLD TIME: 4 hrs; SHORE A: 15; COLOR: Green8. Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb
Feature
MIX RATIO: 1A:1B BY VOLUME - Easy to use silicone rubber compound features a convenient one-to-one by volume mix ratio, no scale is necessarySHORE A HARDNESS: 30 - This scale measures the hardness of flexible rubber molds. A 30A hardness is in the soft to medium soft range, between the flexibility of a rubber band and pencil eraser
POT LIFE: 30 MINUTES, CURE TIME: 6 HOURS - This product cures at room temperature with negligible shrinkage. Best to store at room temperature, see "For Best Results" section below
LOW VISCOSITY FOR EASY MIXING AND POURING - Great for making simple one- or two-piece block molds, no vacuum degassing is necessary
PERFECT FOR ART AND INDUSTRIAL APPLICATIONS - Often used for molds to reproduce sculptures and other prototypes, casting plaster, resins, and wax
Description
Use this silicone mold making rubber for making perfect reproductions that capture intricate detail of original models. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time.
For the novice mold maker - OOMOO30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax.
Technical Information
Mixing Ratio: one to one by volume (100a:130b by weight)
Pot Life: 30 min.
Demold: 6 hrs.
Color: lavender properties (part a and b mixed)
Viscosity: 4,250 cps g/cc: 1.34 Cu. In./Lb.: 20.6
Tensile Strength: 240 psi
Elongation at Break: 250%
Die C Tear Strength: 40 pli
Compression Set: 37%
Shrinkage: .0025 In./In.
Net weight 16 oz. (454 Grams)
For Best Results: Store and use silicone products at room temperature. If material freezes, silicone base will become very thick. Simply allow product to get down to room temperature before use.
9. Life Casting Starter Kit With Alja-Safe Alginate
Feature
Includes everything you need to make a mold and casting of a hand or similar body part.Comes with: 1 lb. Alja-Safe Molding Gel - the world's first and only crystalline silica free alginate (a known carcinogen), 2 lb. casting plaster, Quick Start Guide
Alja-Safe is easy to use and cures quickly. It reproduces fine detail and makes an excellent temporary mold - good for one or two reproductions of any body part. You can then cast plaster, Matrix NEO (polymer modified gypsum) or Smooth-Cast 300Q ultra-fast urethane resin into the mold to make a reproduction.
Alja-Safe is mixed 1 part water to 1 part powder by volume (1 cup + 1 cup, for example).
For making re-usable molds of any body part, use "Body Double" silicone rubber. Visit www.smooth-on.com for more information on lifecasting and what these materials can do for you.
