We spent many hours on research to finding toggler snaptoggle bb, reading product features, product specifications for this guide. For those of you who wish to the best toggler snaptoggle bb, you should not miss this article. toggler snaptoggle bb coming in a variety of types but also different price range. The following is the top 12 toggler snaptoggle bb by our suggestions:
Reviews
1. TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 2)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 1/4"-20 UNC-threaded bolts
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
| Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
| 1/2" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 265 lb. | 241 lb. |
| 5/8" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 356 lb. | 324 lb. |
| 1/2" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 425 lb. | Not available |
| 5/8" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 464 lb. | Not available |
| Concrete Block | 1/2" | 1/4"-20 UNC zinc-plated steel | 1,080 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (2) TOGGLER SNAPTOGGLE BB toggle anchors
- (2) 1/4"-20 UNC bolts
2. TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 3/16"-24 UNC-threaded bolts
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
| Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength Values | Ultimate Shear Strength Values |
| 1/2" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 238 lb. | 247 lb. |
| 5/8" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 356 lb. | 298 lb. |
| 1/2" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 412 lb. | Not Available |
| 5/8" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 462 lb. | Not Available |
| Concrete Block | 1/2" | 3/16"-24 UNC zinc-plated steel | 802 lb. | Not Available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (10) TOGGLER SNAPTOGGLE BA toggle anchors
- (10) 3/16"-24 UNC bolts
3. TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 100)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
| Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
| 1/2" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 265 lb. | 241 lb. |
| 5/8" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 356 lb. | 324 lb. |
| 1/2" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 425 lb. | Not available |
| 5/8" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 464 lb. | Not available |
| Concrete Block | 1/2" | 1/4"-20 UNC zinc-plated steel | 1,080 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
4. 12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 1/4"-20 UNC-threaded bolts
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt (included)
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
Mount anything!The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
5. TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 50)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
| Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
| 1/2" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 265 lb. | 241 lb. |
| 5/8" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 356 lb. | 324 lb. |
| 1/2" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 425 lb. | Not available |
| 5/8" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 464 lb. | Not available |
| Concrete Block | 1/2" | 1/4"-20 UNC zinc-plated steel | 1,080 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
6. Toggler Snaptoggle Toggle Bolt and Drywall Molly (Pack of 4)
Feature
Simple to use and easy to install molly anchor kit.Twice as strong as a regular toggle bolt - solid metal channel
Straps act as installation tool, help install metal channel behind the wall
Kit includes 4pc SNAPTOGGLE 1/4-20 toggle bolts (no bolts)
Description
4pcs kit SNAPTOGGLE 1/4-20 toggle bolt, Grip Range 3/8 to 3 5/8 inch. Includes 2.5 inch screws and washers.This super strong fast toggle bolt allows you to mount tilting or low profile tv mounts to drywall or steel studs. The SNAPTOGGLE fastener is preferred by installers for its superior strength and quick easy installation. The SNAPTOGGLE anchor has been tested by Cornell University and has been found to exceed national building codes. This kit of 4 snap togglers includes 2.5 inch long grade 5 bolts.
Recommendations:
1) 4 Togglers are recommended for low profile or tilting tv mounts with TV weights from 0 to 75 pounds.
2) 8 Togglers are recommended for low profile or tilting tv mounts with TV weights from 75 to 100 pounds.
3) Do not mount TV's heavier than 125 pounds in drywall or on steel studs.
4) The togglers are recommended only for Flat TV mounts or tilting TV mounts.
Specifications:
* Super strong anchor / toggle
* Stronger than standard molly
* Grade 5 bolts
* 8 can hold up to a 125 pound TV
* Smaller hole required than wing molly
* Exceeds National Building code requirements
* Fast easy hands free installation
* Can be used in metal studs with proper holes
7. Toggler Snaptoggle Wall Anchor with BB 1/4"-20" - 4 PK Heavy Duty Deep Wing
Feature
Toggler Snaptoggle Hallow Wall Anchor BB 1/4"-2.5" Bolts - 4 PK; Comes with Free How to Live Stress Free EbookThese are great for installing just about anything to your wall!
Installers use these to mount TV brackets to walls, floating shelves, heavy wall fixtures, etc.
Anchorsare rated to hold 265lbs with 1/2" drywall, 356lbs with 5/8", and 1,000lbs with concrete.
The possibilities are endless!
Description
Toggler Snaptoggle Hallow Wall Anchor BB 1/4"-2.5" Bolts - 4 PK These are great for installing just about anything to your wall! Installers use these to mount TV brackets to walls, floating shelves, heavy wall fixtures, etc. The possibilities are endless! Features: - Snaptoggle anchors BB with 1/4" x 2.5" bolts are rated to hold 265lbs with 1/2" drywall, 356lbs with 5/8", and 1,000lbs with concrete. These values are taken from the snaptoggle website. More information on these values can be seen at toggler.com. - Smallest drill hole for each bolt size"1/4" wing toggle needs 50% larger hole- High strength"holds up to 2x the load of an old-fashioned wing toggle of same bolt size- Reusable in same hole" remove the bolt without losing the anchor- One-person installation" like having an extra pair of hands behind the wall- Insulation pushed aside by metal channel- Does NOT destroy wall or ceiling"plastic cap & metal channel centers bolt & prevents abrasion Installation Instructions: Drill a 1/2" (13mm) hole. Hold metal channel flat alongside plastic straps and slide channel through hole. Minimum clearance behind wall: 1-7/8" (48mm). Hold ends of straps between thumb and forefinger and pull toward you until channel rests flush behind wall. Slide plastic cap along straps with other hand until flange of cap is flush with wall. Snap straps at wall by pushing side to side, snapping off straps level with flange of cap. Place item over flange. Insert bolt through item and tighten until flush against item, then stop. These instructions are provided by/on the Toggler Snaptoggle website. Package Contents: - 4 (Four) Toggler Snaptoggle BB hallow fasteners8. Parts Express Toggler SNAPTOGGLE BB 1/4"-20 Heavy-Duty Wall Anchors 50 Pcs. Golden Zinc Plating
Description
TOGGLER SNAPTOGGLE wall anchors hold up to twice the load of old-fashioned toggles and install in about 10 seconds. BA anchors are designed to work with 3/8" to 3-5/8" thick walls and 1/4"-20 bolts. Tensile strength has been rated at 265 lbs. in 1/2" drywall.9. (BB) 1/4-20 Toggler SNAPTOGGLE Heavy Duty Toggle Bolt Zinc with 1/4-20 x 2 1/2 Combo Pan Machine Screws Zinc (10 Pcs)
Feature
N/ADescription
(BBTM) 1/4-20 Toggler SNAPTOGGLE Heavy Duty Toggle Bolt Zinc with 1/4-20 x 2 1/2 Combo Pan Machine Screws Zinc (10 Pcs) - Third generation of this patented wall anchor with a new longer and stronger plastic strap that now works in base material 3/8 to 3 5/8 inches thick.10. Toggler Snaptoggle BB Zinc Plated Toggle Bolts - 1/4-20 x 2-1/2 Combo Head Bolts - 2 Pieces Each
Feature
2-pcs BB zinc plated Toggle Bolts2-pcs 1/4-20 x 2-1/2 combo head bolts
Description
Third generation of this patented wall anchor with a new longer and stronger plastic strap that now works in base material 3/8 to 3 5/8 inches thick.11. Mechanical Plastics 24014 0.25-20 in. Toggler Snaptoggle BB Toggle Bolt - 100 Pack
Feature
Toggler snaptoggle bb toggle boltFor hollow walls
Replaces old fashioned toggle wings, strong & require a smallest hole
Can be pre-installed without using a bolt & won"t fall behind the wall when the bolt is removed
Solid metal channel centers the bolt which cannot sag
Description
Features. Toggler snaptoggle bb toggle bolt. For hollow walls. Replaces old fashioned toggle wings strong require a smallest hole. Can be pre-installed without using a bolt wont fall behind the wall when the bolt is removed. Solid metal channel centers the bolt which cannot sag. Will not damage or break through the wall even under vibration.. Size - 14-20 in.. 100 pack. Dimension - 8.3 x 5.4 x 5.3 in.. Item weight - 3.5 lbs.12. SNAPTOGGLE (Type BB) Heavy-Duty 1/4"-20 Toggle Bolts - 50pk
Feature
Ideal for mounting flat-panel TVs.Strong-up to 2x the load of an old-fashioned wing toggle.Solid metal channel resists vibration & shock.Save time-at least 6 minutes per anchor v. wing toggles (can use a screw gun; anchor does not spin).Save money-turn a 2-person job into a 1-person job.Use a shorter bolt (no need to carry a wing through the wall).New strap design snaps off flush & does not break prematurely.Smallest installation hole for each bolt size.New golden plating is 7x more corrosion-resistant.Reusable in same hole-remove bolt without losing the anchor..Includes fifty 1/4''-20 SNAPTOGGLE anchors in a box (no bolts included).
