Top 10 4500 psi tank

If you looking for 4500 psi tank then you are right place. We are searching for the best 4500 psi tank on the market and analyze these products to provide you the best choice.

Product Features Editor's score Go to site
Crosman Benjamin 90 Cubic Inch Charging System Cylinder Crosman Benjamin 90 Cubic Inch Charging System Cylinder
Go to amazon.com
Ninja 68ci/4500psi Carbon Fiber HPA Paintball Tank GRAY Ninja 68ci/4500psi Carbon Fiber HPA Paintball Tank GRAY
Go to amazon.com
Air Venturi 4500 PSI Carbon Fiber Air Tank & Fill Station, 90 cu.in Air Venturi 4500 PSI Carbon Fiber Air Tank & Fill Station, 90 cu.in
Go to amazon.com
IORMAN Universal 3L 4500psi Carbon Fiber Air TankEmpty Bottle& Paintball Fill Station with Valve Regulator Gauge for PCP Game IORMAN Universal 3L 4500psi Carbon Fiber Air TankEmpty Bottle& Paintball Fill Station with Valve Regulator Gauge for PCP Game
Go to amazon.com
Ninja Grey Ghost Carbon Fiber Air Tank w/ Adjustable Regulator - 50/4500 Ninja Grey Ghost Carbon Fiber Air Tank w/ Adjustable Regulator - 50/4500
Go to amazon.com
Ninja 90ci 4500psi Carbon Fiber Air Tank & Fill Station for PCP Air Guns Ninja 90ci 4500psi Carbon Fiber Air Tank & Fill Station for PCP Air Guns
Go to amazon.com
Ninja Carbon Fiber HPA Tank - 50/4500 - Grey Ninja Carbon Fiber HPA Tank - 50/4500 - Grey
Go to amazon.com
Davv 110v 300bar Portable Air Compressor Paintball Fill Station System for PCP Game Davv 110v 300bar Portable Air Compressor Paintball Fill Station System for PCP Game
Go to amazon.com
Taousa 70018 Airgun PCP Pump High Pressure Hand Pump Diving Cylinder Pump, Up to 4500 psi Taousa 70018 Airgun PCP Pump High Pressure Hand Pump Diving Cylinder Pump, Up to 4500 psi
Go to amazon.com
Empire Paintball Basic Carbon Fiber Air System, 68 Cubic Inch, Grey Empire Paintball Basic Carbon Fiber Air System, 68 Cubic Inch, Grey
Go to amazon.com
Related posts:

Reviews

1. Crosman Benjamin 90 Cubic Inch Charging System Cylinder

Feature

Charging tank rated for 4500 PSI, Capacity is 90 cubic inch
Carbon fiber construction, Stainless steel fill connection
Built-in pressure gauge and bleed valve
Compatible with most Benjamin pcp models. Dot Certified, 12" microbore hose, grippy hand wheel for controlled filling.
Refer to the PDF attached below for User Guide

Description

The Benjamin 90 cubic inch Charging System cylinder is made to work with most of the Benjamin PCP models, including the Pioneer Airbow. It is rated for 4500 PSI, constructed of carbon fiber to reduce weight, and provides 7-25 refills in most models. Weighing under 5 pounds and measuring only 15" in length and 4" in diameter, this tank fits nicely in a pack for a day in the field. DOT certified.

2. Ninja 68ci/4500psi Carbon Fiber HPA Paintball Tank GRAY

Feature

MADE IN THE USA
4500 psi
D.O.T. and T.C. approved carbon fiber bottle
5 Year Hydro
Default output of 800 PSI to work out of the box with all Paintball Guns

Description

Ninja makes the best quality and most reliable High Pressure Air paintball systems in the world. This is their 4500 psi line of Carbon fiber HPA systems.

3. Air Venturi 4500 PSI Carbon Fiber Air Tank & Fill Station, 90 cu.in

Feature

Fills to 4500 psi
90 Cubic Inch Tank
Regulated to output 2900 PSI

Description

This Air Venturi carbon fiber tank fills to 4,500 psi max fill pressure. Regulated to approximately 2,900 psi output, this 90 cubic inch tank weighs only 4.10 lbs. Includes fill device with high-pressure stainless steel female Foster quick-disconnect fitting. This handy carbon fiber tank is small enough to tote around in the field in a backpack while hunting or eliminating pests. Easily fill your air rifles and pistols with the easy on/off quick-disconnect coupling. More refills, less hassles, no pumps, no heavy tanks -- it has everything going for it!

4. IORMAN Universal 3L 4500psi Carbon Fiber Air TankEmpty Bottle& Paintball Fill Station with Valve Regulator Gauge for PCP Game

Feature

Product Specification: 3L water volume, 900L gas volume, 185ci capicity, 20-30mpa / 3000-4500psi service pressure, CE / EN certificated, M18x1.5 bottle screw thread size.
Product Structure: Using high-quality raw materials AL6061 aluminum alloy liner with full-wrapped carbon fiber and glass fiber winding, external surface treatment is epoxy coated, high strength features creep resistance, shock resistance and corrosion resistance.
Product Safety Performance Testing: One of the safety tests is the hydrostatic test pressure, for carbon fiber cylinders, it can reach 50Mpa. The other is the minimum burst pressure, which can reach 102Mpa for carbon fiber cylinders, can hold more gas under the same volume conditions.
Product Advantage: Carbon fiber composite air cylinder is a new material cylinder developed in recent years. Compared with the traditional steel cylinders, the weight is reduced by 70%, the corrosion resistance is strong, there is no magnetic property, the performance is stable, and the inner surface is specially treated to ensure that the holding gas is clean and has no odor, long service life (The service life is 15 years).
Porduct Application: Loading gas, Emergency escape respirator, Fire breathing apparatus, Underwater breathing apparatus, Lifesaving of ships, Clean energy, Snorkeling diving breathing, PCP rifle and Paintball filling, Medical care and Mine emergency etc. Widely for fire-fighting, chemical industry, shipping, laboratory, mine, pertroleum, warehouse, factory and metallurgy, it can be used in various positive pressure breathing apparatus.

Description

Product Parameter
1. Capacity: 3L
2. Service Pressure: Max up to 30mpa / 300bar / 4500psi.
3. Water Testing Pressure: 50mpa
4. Burst Testing Pressure: Greater than 102mpa.
5. Product Certification: CCS/CE certificated.
6. Bottle Screw Thread Size: M18x1.5-6H.
6. Product Size: Outside Diameter-114mm / 4.5 inch, Height-458mm / 18 inch
7. Product Weight: 2.2kg.

Product Analysis
1. Skilled quality assurance- Military quality, safe and reliable Carbon fiber gas cylinder, safety first choice.

2. Imported material security- Featured high-quality AL6061 material, excellent compressive wear resistance.

3. High strength more pressure- Full-wrapped composite cylinder, its special structure ensures stable product performance, strong safety, pressure up to 30MPa.

4. Design safety seal- Sealing ring groove design safety seal.

5. Fashion of carbon fiber gas cylinder- Seamless design of filament winding.

6. High pressure gas cylinder valve- Valve thread in line with standard.

7. Exquisite workmanship, export quality- Litht and portable.

8. Inspection cycle: 3Yr.

9. Service life: 15Yr.

Product Packing
1x 3L Air Tank
1x Safety Valve with Gauge

5. Ninja Grey Ghost Carbon Fiber Air Tank w/ Adjustable Regulator - 50/4500

Description

Ninja Grey Ghost Carbon Fiber Air Tank w/ Adjustable Regulator - 50/4500

6. Ninja 90ci 4500psi Carbon Fiber Air Tank & Fill Station for PCP Air Guns

Feature

3000 psi output pressure for PCP air guns
90 ci capacity
Light-weighted, durable and portable carbon fiber construction
Include fill station and bleed valve
Grey color

Description

- High capacity: 90 ci/4500 psi
- Regulated output for PCP air guns: 3000 psi
- Light-weighted, durable and portable carbon fiber construction - Fit PCP air guns with a 1/8" quick disconnect
- Include fill station and bleed valve
- 4.5" diameter, 13" tall

NOTE: This air tank is NOT for paintball markers.

7. Ninja Carbon Fiber HPA Tank - 50/4500 - Grey

Feature

4500 PSI
Adjustable regulator
5 Year Hydro
MADE IN THE USA!

Description

Ninja Carbon Fiber HPA Tank - 50/4500 - Grey

  • MADE IN THE USA!!!!
  • SRT piston - Sonic Recharge Technology piston - plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down
  • SPA - Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons
  • MFV - Mini Fill Valve - Non wrist digging, low profile design fill valve
  • All black tactical look
  • Brass or optional Aluminum bonnet - see regulator parts for details
  • Meets all DOT, CGA and ASTM specifications
  • Completely rebuildable by the end user
  • Every regulator is hand crafted and factory tested
  • Super low response curve 0-50 psi from full to empty
Safety
  • ASTM COMPLIANT bonnet thread
  • ASTM COMPLIANT DOT burst disc
  • ASTM COMPLIANT Low pressure burst disk
  • ASTM COMPLIANT Restrictor, bleed hole and safety groove
  • Mini Fill Valve IS hardened, plated 5000 psi rated
  • Reg installed to ASTM specifications
Product Features
  • 50 cubic inch
  • 4500 psi
  • D.O.T. approved Carbon fiber bottle
  • 5 year hydro
  • Gives you 875 shots per fill depending on marker

8. Davv 110v 300bar Portable Air Compressor Paintball Fill Station System for PCP Game

Feature

1.Voltage110v, Frequency60Hz, Flow Rate30L/min; 1cfm, Power1500w. Working Pressure Service: Normally rated pressure 20Mpa/200bar/3000psi to Max 30Mpa/300bar/4500psi.
2.Motor Type: Single phase motor. Max Filling Volume: Less than 1 liter / 68 ci, Filling time: 0.5L container 0-30MPa about 5-10 minutes, 1L container 0-30Mpa about 15-20 minutes.
3.Pressure adjustment system with manual shutdown, comes with efficient and reliable safety valve, automatic leaking after full filling until turn it off, cooling way is circulating water cooling, the water tank and pump is separated, drain valve by hand.
4.Directly to personal PCP air gun / paintball or paintball co2 tanks for filling, not for greater volume scuba diving tanks.
5.Compacted confined space design strong security and reliability, easy operation Low vibration, speed, and noise. (Weight: 19kg, Dimension(L-W-H): 360mmx180mmx380mm, Noise Level dB(A): Less than 65 )

Description

Product Overview
DAVV SCU30 Electric Air Compressor is an ideal choice for shooting enthusiasts, with advanced, safe, stable and efficient US Plug.

The portable dimensions and light weight make it very easy to transport and opterate, less than 1L for strong security and reliability .

This Pump can be used to fill the tank (normal 0.75L, max 1 Liters), ideal for personal PCP paintball game; Can't be used for scuba diving tanks.

Noise level less than 65db, easy operation Low vibration, speed, and noise.

The inflation rate: 0.5L container 30MPa about 2-5 minutes, 1L container 30Mpa about 10-15 minutes.

Product Feature
- Charging rate: 30L/min; 1.0cfm - Working pressure: 20-30MPa, 200-300bar, 3000-4500psi.
- Electric power: 1.5kw
- Power: 110v / 60hz
- Cooling Type: Seprated Water colling.
- Pressure adjustment system with manual stopping function- water cool auto stop.
- Using Placese: Directly to PCP airsoft painbtall or paintball tanks for filling.Directly to PCP airsoft painbtall or paintball tanks.
- Dimension: 360x180x380mm/11.8x5.9x12.5 inch
- Weight: 19kg

Note
1. Please add ilubricating oil before you start using the machine first time, Lubricate oil recommend: Mobil Rarus 827 or 829, ISO 100/150, SAE 40/50 as the lube oil for this type of compressor

2. When running, if the machine vibrates violently, please add pad or towel under the compressor

3. When the compressor working, the colling system must be working at the same time

4. The machine must not be working without oil, so you must pay attention to the level of oil.
5. Check the electric voltage is the same as your local electric supply.

9. Taousa 70018 Airgun PCP Pump High Pressure Hand Pump Diving Cylinder Pump, Up to 4500 psi

Feature

3-stage pump designed for PCP airguns, pistols, rifles, etc. Equipped with 8mm female quick connector. Some assembly required. Product pictures are for reference only, actual decor may be different. Extra o-rings have been discontinued since the promotion has ended. Ship to US only.
Lifetime warranty for the PCP pump for the original owner covers any defect in material or workmanship during manufacturing. This warranty does not cover accessories, paint finishes or general wear and tear of the pump. US based customer service available.
Accessories included are the same as those come with other major brand pumps. Special adapters (not included) are needed if the adapter on the pump doesn't fit your air rifle. The buyer is responsible to find and purchase the necessary adapters.
Silicone oil inside the gauge is to protect the gauge from bursting during transportation. We suggest let the oil out in daily use. Please contact TaoUSA if help is needed.
Max pressure: 4500psi /310bar. For safety, use the correct pressure rated for your device only. Not commended for dealing with food or drinking water. Scroll down for warranty condition, more details and notes.

Description

Taousa PCP Pump High Pressure Hand Pump, Up to 4500psi

Special note:
The extra O-rings mentioned in some reviews have been discontinued since the new product promotion ended. The accessory included is same as other major pumps. Special adapters needed for your devices are not included.

**********

Package includes: 1x high pressure airgun PCP hand pump, 1x manual, 1x wrench, 1 bottle silicone lubricant.
3-Stage pump designed for pre-charged pneumatic (PCP) airguns, pistols, rifles. Safe and convenient to bring it to field for sporting or hunting.
Equipped with 8mm female quick connector. Please contact TaoUSA if help is needed.
The max pressure is 4500psi / 310bar, higher pressure rating than most other pumps. For safety, please pump your gun to the correct pressure rated for your gun only. Please contact TaoUSA if help is needed.
Sturdy grips, foot plate for stability and pressure gauge for monitoring pressure level. Ergonomics design handle.
Recommended replacement parts can be found on this page.
It can also be used for air diving cylinder and air bags, etc.

Warranty:
Lifetime warranty for the PCP pump for the original owner covers any defect in material or workmanship during manufacturing. This warranty does not cover accessories, paint finishes or general wear and tear of the pump.

Note:
1. If there are leaks during the test as instructed in the manual, please use the included wrench to tight parts up.
2. Product pictures are for reference only. Actual decor on the pump body may be different.
3. Not commended for dealing with food or drinking water.
4. Please contact TaoUSA if help is needed.
5. We ship to US only.

10. Empire Paintball Basic Carbon Fiber Air System, 68 Cubic Inch, Grey

Feature

Proven regulator performance using Pure Energy Technology
68 Cubic Inch at 4500 psi
Standard 800 psi output pressure
Aircraft grade aluminum construction regulator
Fully serviceable regulator design

Description

Empire Basic Air Systems offer an affordable option to the player who wants to upgrade to a High Pressure Air system. These high quality air systems feature an aluminum regulator that provides steady performance and reliability. With a five-year retest cycle, these Empire Basic tanks will operate for many years of quality performance.

Conclusion

By our suggestions above, we hope that you can found the best 4500 psi tank for you. Please don't forget to share your experience by comment in this post. Thank you!