When you looking for 1500w power supply 60v, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable 1500w power supply 60v is not an easy task. In this post, we show you how to find the right 1500w power supply 60v along with our top-rated reviews. Please check out our suggestions to find the best 1500w power supply 60v for you.
Reviews
1. Yeeco DC DC 10-60V to 13-97V Boost Voltage Regulator Power Converter 1500W 22A Volt Transformer Power Supply Module Board with Adjustable Potentiometer & Heatsink Fan
Feature
DC 10-60V to 13-97V adjustable DC DC step up voltage regulator boardWith CV, CC adjusting potentionmeter and UVP(under voltage protection)
22A maximum output current and 1500W max output power
Size: 130x51x80mm (Length x Width x Height)
Heatsink for heat dissipation and copper wire winding inductance for filtering AC
Description
Parameter:
Input voltage range: DC 10-60V (Typical: 48V)
Output voltage range: DC 13-97V (Typical: 84V)
Input current: 35A (40V MAX)
Output current: 22A MAX
Dynamic response speed: 300us (working condition: 5% load current change)
Conversion efficiency: 48V to 60V 8A--98.1%; 48V to 72V 8A--98.1%; 48V to 84V 8A--97.6%;
Outputshort-circuit protection: Yes
Input reverse connection protection: Yes
Working temperature: -20-65
Storing temperature: -40-125
What temperature will the fan start to work: 60
Weight: 400g
Package include:
1 x Boost Power Converter
2. KNACRO 1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V New Electric Unit Modules Module
Feature
Power supply with double iron silicon aluminum 4 1.2MM pure copper wire and rao. 100V/210A low resistance power MOS, high power and high current input, suitable for high power LED motorsHave input MOS meter protection, don't worry about input after burn out the power supply.
When used in battery input low battery protection avoid battery discharge damage power supply module and a battery.
Thickening of the radiator and intelligent temperature control cooling fan.
Description
Module properties: non-isolated step-up module (BOOST)Input voltage: DC 10V~60V
Input current: 10~30V input voltage, maximum current 30A
31~60V input voltage, maximum current 25A
Quiescent current: 15 mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)
Output voltage: 12~90V continuously adjustable
Constant range: 0.8~20A(0.3A
Temperature: -40~ + 85(ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150 KHz
Conversion efficiency: 92% ~ 97%
Low battery protection: yes
Input reverse polarity protection: yes
Enter the anti-reverse protection: yes
Short circuit protection: yes
Installation: 4 x 3 mm screw holes
Module size(L*W*H): 130 x 52 x 85 mm
Applications:
1.DIY a power supply, 12V can input and output can 12-50V adjustable.
2.The power supply for your electronic device, according to your system can set the output
3.As the power supply for your digital products supply.
4.DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books.
5.Solar panel regulator.
6.To the battery, rechargeable lithium batteries.
Note:
Output positive and negative can not be reversed, can not be short circuit.
Long time high current high power full load work should pay attention to ventilation and heat dissipation, in order to extend the life of the power supply.
Use battery, switch power supply, solar panels, generators and so on as the input source, the need to reduce the battery protection, otherwise it will damage the battery and power supply
Package Included:
1 x Boost Constant Current Module
3. 1500W 30A DC-DC Boost Converter DIY Step-up Boost Constant Stream Power Supply Module Board In 10-60V Out 12-90V Electric Unit Module
Feature
Input Voltage: DC10V to 60V; Output Voltage: 12V to 90V (adjustable, default is 19V);Max. Input Current: 30A(input voltage 10V to 30V) or 25A(input voltage 31V to 60V)The power supply module uses double sendust magnets winded with 1.2mm copper wires
Support reverse input protection with MOS so there is no worry about wrong input wire and burn out power supply
Low voltage protection will protect module and battery against damage from over-discharge when use a storage battery as input
Thickened heatsink and intelligent temperature control cooling fan dissipate heat better
Description
Walfront 1500W 30A DC-DC Boost Converter DIY Step-up Boost Constant Stream Power Supply Module Board In 10-60V Out 12-90V Electric Unit Module
Product Specification:
Input Voltage: DC10V to 60V
Max. Input Current: 30A(input voltage 10V to 30V) or 25A(input voltage 31V to 60V)
Quiescent Current: 15mA(will increase when convert 12V to 20V)
Output Voltage: 12V to 90V (adjustable, default is 19V) Max. Output Current: 20A (related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be. please enhance heat dissipation when current is over 15A)
Constant Current Range: 0.8A to 20A(+/-0.3A)
Reverse Input Protection: Yes (150A MOS)
Lower Voltage Protection: Yes (V8 to 50V adjustable, self-recovery)
Operating Temperature: - 40 to +85 (if temperature is too high, please enhance heat dissipation)
Frequency: 150KHz
Conversion Efficiency: 92% to 97%
Input Over-current Protection: Yes (automatically protect when input is more than 35A, and power supply voltage will not increase)
Short Circuit Protection: Yes(input 30A fuse)
Wiring Method: Terminals(please use large current copper wire)
Max. Output Power = Input Voltage*Max Current (If input 12V, the max output power=12V*30A = 360W)
Size:130 x 84 x 52mm / 5.11 x 3.3 x 2.04"
Package Includes:
1 x Module
Note:
1. Output wiring can not be reversed or short circuit.
2. If the module is connected to inductive load, the minimum input voltage should be higher(e.g. 24V) and maximum output power should be lower(e.g. 500W).
3. If a storage battery, switch power supply, solar panel or electric generator is used as input power source, the low voltage protection value should be adjusted lower, otherwise it might cause damage.
4. Quickbuying 1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V
Feature
1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90VDescription
1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V5. HONWEN 1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V L
Feature
1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V LDescription
1500W 30A DC Boost Converter Step-up Power Supply Module In10~60V Out 12~90V L6. PEACE BIRD 1500W 30A DC-DC High Current Power Supply Module DC Constant Current Boost Voltage Converter Electric Booster Module Board 10V-60V 12V Step Up to DC 12V-90V with Cooling Fan
Feature
Built-in radiator and cooling fan to help heat dissipation quickly.Power supply with double iron silicon aluminum 4 1.2MM pure copper wire and rao. 100V/210A low resistance power MOS, high power and high current input, suitable for high power LED motors
Supports over current protection, short circuit protection and input reverse polarity protection, safe to use.
Supports Max. 20A putput current, if output current is over 15A, it needs to be enhanced the cooling.
Note: it is necessary to lower the battery protection voltage, no matter using the battery, switching power supply, solar panel, or generator etc as the input source, otherwise it will damage the battery and power module.
Description
This is a 1500W boost constant current module with high conversion efficiency. Supports MOS anti-reverse protection, and built-in radiator and cooling fan to help heat dissipation quickly, safe and reliable to use.When using the boost power supply, please pay attention to the following points:
1. The output polarity cannot be reversed or short circuit;
2. When using batteries as the input source, you must lower the battery protection, otherwise it will damage the battery and power supply;
3. Input power supply voltage must be above 10V;
4. When the power supply is used for the input power supply, the input power and the output voltage of the input power supply are the first to be unloaded; Then pick up the load. (Please ensure that the switching power supply has been working);
5. When the constant current mode is used to set the voltage, the constant voltage must be higher than the input voltage.Do not use the way of short circuit output current, and the circuit structure of the boost module can not be adjusted in short circuit way.
6. If the input voltage fluctuation range is lower than the set output voltage, then the output voltage is constant to ensure the input is lower than the output voltage.
Specifications:
Module name: 1500W boost constant current module
Module properties: non isolated boost module(BOOST)
Conversion efficiency: 92%-97%(The efficiency has an effect on input voltage, output voltage, current and pressure difference)
Installation: 4pcs 1.2mm column
Connection mode: Terminal blocks(Please use big current and pure copper wire)
Input voltage: 10-60V
Input current: 30A(10-30V input); 25A(31-60V input)
Static operating current: 15mA
Output voltage: 12-90V continuous adjustable(default output 19V)
Package List:
1 * 1500W Boost Constant Current Module
7. Boost Voltage Converter, DROK 1500W Voltage Regulator Booster DC 10V-60V 12V Step Up to DC 12V-90V 24V 30A Power Supply Module High Power Volt Transformer Circuit Board with Cooling Fan
Feature
DROK boost voltage converter input voltage range is DC 10-60V, continuously adjustable output voltage range is DC 12-90V, max output current is 20A, more than 15A please enhance heat dissipation.Application: DIY a power supply, 12V can input and output can 12-50V adjustable; as the car power supply, charge for your laptop, PDA or a variety of digital products; Solar panel regulator etc.
Protection: the step-up power regulator is designed with input over-current protection, battery low voltage protection, input MOS reverse polarity protection, short circuit protection.
Speacial Design: the voltage transformer is equipped with thickening radiator and intelligent temperature control cooling fan.
Note: it is necessary to lower the battery protection voltage, no matter using the battery, switching power supply, solar panel, or generator etc as the input source, otherwise it will damage the battery and power module.
Description
DROK 1500W Boost Voltage Converter
Parameters:
Module type: non-isolated step-up module (BOOST)
Input voltage range: DC 10V~60V
Input current: 10~30V input voltage, maximum current 30A; 31~60V input voltage, maximum current 25A
Static operating current: 15 mA (when 12V step up to 20V, the higher the output voltage, the current will increase)
Output voltage: 12~90V continuously adjustable (default 19V)
Output current: 20A MAX, more than 15A please enhance heat dissipation
Constant current range: 0.8~20A (0.3A)
Temperature: -40~ + 85(if the ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150 KHz
Conversion efficiency: 92% ~ 97%
Protection: input over-current protection, battery low voltage protection, input reverse polarity protection, short circuit protection
Installation: 4 x 3 mm screw holes
Module size(L*W*H): 130 x 52 x 85 mm
Applications:
1. DIY a power supply, input 12V and output can be adjustable to 12-50V.
2. Charge for your electromobile.
3. As the car power supply, charge for your laptop, PDA or a variety of digital products.
4. DIY a notebook mobile power supply: with 12V big-capacity lithium battery pack, get your notebook on anywhere.
5. Solar panel regulator.
Package Including:
1 x Power Converter Module
8. Switching Power Supply DC 60V 25A 1500w Power Adapter Driver Transformer 110V 220V AC DC15V for Led strip lamp CNC CCTV
Feature
100% brand new switching power supply transformer, High efficiency, high reliability and low costSwitch input voltage range choice 100% full load and machine test, Protection characteristics: short circuit/overload Air cooling
Design with Built-in EMI Filter, improve signal precision
Apply to LED strip light,LED down light,led panel light, CNC,CCTV,Motor,Machinery etc.
High price-effective, reliability with industry standards
Description
Item Features: 100% brand new switching power supply transformer Unique cooling fans design Universal AC input / full range Auto-recovery after protection LED indicator for power on Design with Built-in EMI Filter, improve signal precision This Power Supply Unit "DOES NOT" come with installation instruction, wiring cable, on/off switch, or screws. installation of qualified electrician is highly recommended Application: Widely used in industrial automation, LED strips,LED display, CCTV security cameras,communications, etc. Features: High efficiency, high reliability and low cost Switch input voltage range choice 100% full load and machine test Protection characteristics: short circuit/overload Air cooling Item No. S-1500-60 Rated Load: 1500W (Max Load 1300W) Output Voltage: DC60V (Constant Voltage) Output Current: 0-25A Max Input Voltage: AC85-145V AC 50/60Hz Conversion Efficiency: 80% Power factor: N Dimension: L240xW125xH76mm Working temperature: -30~+50C Temperature Rise: 30C Storage temperature: -30~+100C IP code: IP20 Brand : XUNBUMA Coolig type: Fan Cooling (Fan Work With a little noise) Certificate: CE, ROHS,EMC, LVD Etc Application: LED strip light,LED down light,led panel light, CNC,CCTV,Motor,Machinery etc.9. Boost Converter, Asixx 1500W 30A DC-DC Boost Converter or Step-up Power Module in 10~60V Out 12~90V with 1.2mm Copper Wires Suitable for Big Power LED and Motors
Feature
The power supply module uses double sendust magnets winded with 1.2mm copper wires100V/210A low resistance MOS with big power and current input, suitable for big power LED, motors
Support reverse input protection with MOS so there is no worry about wrong input wire and burn out power supply
Low voltage protection will protect module and battery against damage from over-discharge when use a storage battery as input
Thickened heatsink and intelligent temperature control cooling fan dissipate heat better
Description
Specifications:
Type: Non-isolated step-up module (BOOST)
Input Voltage: DC10V to 60V
Max. Input Current: 30A
25A
Quiescent Current: 15mA
Output Voltage: 12V to 90V
Max. Output Current: 20A
Constant Current Range: 0.8A to 20A(+/-0.3A)
Reverse Input Protection: Yes (150A MOS)
Lower Voltage Protection: Yes (V8 to 50V adjustable, self-recovery)
Operating Temperature: - 40 to +85
Frequency: 150KHz
Conversion Efficiency: 92% to 97%
Input Over-current Protection: Yes
Short Circuit Protection: Yes
Wiring Method: Terminals
Max. Output Power = Input Voltage*Max Current
Size:130 x 84 x 52mm / 5.11 x 3.3 x 2.04"
Note:
1. Output wiring can not be reversed or short circuit.
2, If the module is connected to inductive load, the minimum input voltage should be higher(e.g. 24V) and maximum output power should be lower(e.g. 500W).
3, If a storage battery, switch power supply, solar panel or electric generator is used as input power source, the low voltage protection value should be adjusted lower, otherwise it might cause damage.
Package Includes:
1 x Module
10. MuLuo 1500W DC-DC Step-up Boost Converter 10-60V to 12-97V 30A Constant Current Power Supply Module LED Driver Voltage Power Borad
Feature
Voltage/Current: Power converter module input voltage range is DC 10-60V, continuously adjustable output voltage range is DC 12-97V, max output current is 22A, more than 15A please enhance heat dissipationApplication: 1500W step-up module can be used in DIY a power supply, 12V can input and output can 12-50V adjustable; as the car power supply, charge for your laptop, PDA or a variety of digital products; Solar panel regulator etc
Protection: the step up regulator is designed with input over-current protection, battery low voltage protection, input MOS reverse polarity protection, short circuit protection
Speacial Design: the boost transformer is equipped with thickening radiator and intelligent temperature control cooling fan
Durable copper wires: The power supply module uses double sendust magnets winded with 1.2mm copper wires, which provide stable performance
Description
Description:The power supply module uses double sendust magnets winded with 1.2mm copper wires.
Support reverse input protection with MOS so there is no worry about wrong input wire and burn out power supply.
Low voltage protection will protect module and battery against damage from over-discharge when use a storage battery as input.
Power converter module input voltage range is DC 10-60V, continuously adjustable output voltage range is DC 12-97V, max output current is 22A, more than 15A please enhance heat dissipation.
Application: DIY a power supply, 12V can input and output can 12-50V adjustable; as the car power supply, charge for your laptop, PDA or a variety of digital products; Solar panel regulator etc.
Specifications:
Material: metal.
Color: show as pictures.
Size: 130*52*84mm.
Input voltage range: DC 10V~60V.
Input current: 10~30V input voltage, maximum current 35-40A; 31~60V input voltage, maximum current 30-35A.
Static operating current: 15 mA (when 12V step up to 20V, the higher the output voltage, the current will increase).
Output voltage: 12~97V continuously adjustable.
Output current: 22A MAX, more than 15A please enhance heat dissipation.
Constant current range: 0.8~22A (0.3A).
Operating frequency: 150 KHz.
Conversion efficiency: 92% ~ 97%.
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Package include:
1 * Step-up Module.
