When you looking for ampere display lcd, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable ampere display lcd is not an easy task. In this post, we show you how to find the right ampere display lcd along with our top-rated reviews. Please check out our suggestions to find the best ampere display lcd for you.
Reviews
1. DROK DC 0-300V 200A STN LCD Display Digital Multimeter Voltage Ampere Power Energy Ammeter Voltmeter Battery Volt Amp AH Monitor Panel with Hall Sensor
Feature
Multifunctional Meter: DROK multimeter panel is available to measure percentage and AH of remaining capacity, DC positive and negative bidirectional current, DC voltage, DC positive and negative power, DC positive and negative bidirectional accumulated electric energy. Voltage measurement range is DC 0-300V, current measurement range is 0-200A.Hall Sensor & Easy Mount: the voltage amperage meter is coming with a Hall transformer to for isolated measurement, reliable and safe; accepting two-wire system connection and three-wire system connection, could be powered DC5~90V, easy and simple to wire this meter up.
Display: backlight can be controlled to be ON or OFF as user's need; Equipped with full angle of view LCD screen, users could see the display clearly whenever at night and day, indoor or outside, even under the sunshine.
Alarming Function: it will alarm and flash to draw your attention when the real voltage is higher or lower than preset alarming voltage and real current is higher than preset current; It will also alarm and flash to remind you to charge for your device when the remaining capacity of battery is low.
Wide Applications: Suitable for all kinds of batteries, such as Lead-acid batteries, Lithium Polymer batteries, lithium iron phosphate batteries and etc. With function of storing date when power down, using this meter, no need to worry that your electric data will be lost.
Description
Technical Parameters:
Model: WLS-PVA200
Current measuring range: 200A
Current resolution: 0.1A
Power supply range: DC590V
Voltage measuring range: DC0300V
Voltage resolution: 0.1V
Capacity measuring range: 0999AH
Power measuring range: 0999KW
Electric energy measuring range: 0999KWH
Measurement error:1%
Refreshing speed: 0.5S/time
Installing size: 76.0mm * 39.5mm
Diameter of transformer:20mm
Working current: backlight on: 10MA;backlight off4MA
Package includes:
1 X LCD Digital Cullen Meter
2. DROK Dual Display DC Digital Multimeter Voltage Ampere Meter LCD Digital Display Voltmeter Current Meter
Feature
It is a Voltmeter for testing DC 0-199 9V and also an ammeter for testing 0-200a with shuntIt's power consumption is 0 5VA and measure speed is 2 times per second, with a tiny Size
Wide common ground power supply Voltage (3-40v), dual LCD display DC Voltage current meter with embedded installation
High measure accuracy of +/-1 percent 2 digits it can work under extreme condition, No direct exposure
It is commonly used in solar power systems, battery chargers, DC welding machine, sine wave inverter, electric vehicles, electric vehicles, electric car chargers and other equipment
Description
Parameters:Measuring Accuracy: +/- 1% 2 digits
Displayer: LCD
Measure Range: DC0-199.9V_0-200A
Power Consumption: less than 0.5VA
Measure Speed: 2 times per second
Size: 70*40*39mm
Installation Size: 68*38mm
Extreme Working Condition
Working Temperature: -10+50
Working humidity: 1080%(No condensation)
Working pressure: 80106kPa
Sunlight: no direct exposure
Package includes:
1 x digital voltmeter Ammeter
3. Yeeco DC-DC 5.3-32V to 1.2V-32V Adjustable Buck Voltage Converter Stabilizer Step Down Voltage Regulator Reducer Power Supply Module with Protective Shell Dual Voltage Ampere Volt Amp LCD Display
Feature
12A DC DC adjustable step down power converter supply transformer with LCD voltage ampere dual display; with buttons and wiring terminalsInput voltage: 5.3-32V(Maximum 35V; minimum 4V input, but voltage & current testing will be inaccuracy); Output voltage: 1.2-32V, must make sure the input voltage is higher than output voltage, minimum deviation is 0.8V)
You can use the two buttons for switching input/ output voltage display; output power/ current display; Short-press for switching on/ off the output and long-hold for setting the output state in the next time power-on
With anti-reverse connection protection to avoid burning the converter; 95% conversion efficiency, high current and low heat, great for high power LED constant current driving and lithium battery charging
Size: Length-82mm x Width-52mm x Height-32mm; Wiring instruction: IN+, IN- for voltage input positive and negative; and OUT+, OUT- for voltage output positive and negative; Package includes two Acrylic panels, eight pillars and eight screws
Description
Parameter:
Input voltage: 5.3-32V (Maximum 35V; minimum 4V input, but voltage & current testing will be inaccuracy if input is lower than 5.3V)
Output voltage: 1.2-32V, must make sure the input voltage is higher than output voltage, minimum deviation is 0.8V)
Output current: Max 12A under the situation of enhancing heat dissipation, recommend to use within 8A.
Output power: 120W(within 8A) under naturally heat dissipation; can get to 160W if you enhance heat dissipation
Voltage display: resolution 0.05V, testing range 0-32V
Current display: resolution 0.01A, testing range 0-12A
Conversion efficiency: about 96%
Working current: about 25mA
Soft start: Yes
Anti-reverse connection: Yes
Anti back flow: No (You can power on the converter first and then connect the battery if you want to charge the battery, and making sure the battery voltage is lower than output voltage; If you have diode, you can connect it to output+ in series)
Short-circuit protection: Yes
Size: 82mm x 52mm x 32mm (Length x Width x Height)
Weight: 80g
Package include:
1xBuck Power Converter
4. 30A Solar Charge Controller 12V/24V Automatic with Ampere Display 100% enough Ampere with LCD Show PWM Charge Multiple Protection Lead-acid Battery Charge Controller
Feature
PWM charging mode to solve the battery full problem and protect the battery lifeMultiple protection, overcharge protection, over discharge protection, overload protection, reverse polarity protection
Foot amps, 30A, with current display, easy to install
Solar charging controller for off-grid systems, home, business
Aluminum alloy bottom plate, good heat dissipation, more stable, prolong service life,
Description
1.Solar charge controller2.Rated voltage:12V/24V AUTO
3.Rated current:30A With Ampere Show
4.USB output : without
5.DC output voltage/current12V
6.Voltage of solar panels:50V
7.Float charging voltage:13.7V/27.4V
8.Low voltage protection:10.5V/21V
9.Low votage recovery : 12.2V/24.4V
10.Characteristic : No load loss: 10mA,Loop Voltage drop: 170mV , Temperature compensation:-4mV/Cell/
11.Working Environment : Operating temperature: -20- +60 , Storage temperature :-30- +70
12.Humidity requirements : 90%, No Condensation Installation cable area: 7#AWG(16mm2
13.Package size : 209*108*63mm
14.Weight : 390g
5. AC Voltmeter Ammeter, DROK Digital Multimeter Voltage Ampere Meter Panel AC 80-260V 110v 220v 20A Electrical Volt Current Power Energy Monitor Tester Gauge with LCD Display & Built-in Shunt
Feature
Multifunction: it is a compact, lightweight and functional ac multi-meter, with LCD screen, can display voltage, current, active power and energy at the same time. It does not control or effect the load in any way.Measurement Range: DROK digital multimeter voltage test range is AC 80~260V, current test range is 0~20A, power test range is 0~4.5KW, energy test range is 0~9999kWh.
Application: the ac voltage meter perfect to work with a generator or solar panel setup, also great to monitor accumulated energy usage on devices that cycle on and off(refrigerator, dehumidifier, washing machine, wall a/c unit) and the phantom load(cable modem, router, DVR).
Protection: our volt amp energy tester is designed with power alarm threshold preset function, overload alarm function (over power alarm threshold, backlight and power will flash to alarm); with built-in CT.
LCD Display: the AC voltmeter ammeter has large clear numbers on the backlit display, making reading the results a breeze; the blue backlight can be turned on/off by the front accessible recessed switch located on the right side bezel.
Description
Parameters:Working Voltage: 80 ~ 260VAC
Measuring Range: 80 ~ 260VAC
Rated Power: 20A/4500W
Operating Frequency: 45-65Hz
Measuring Accuracy: 1.0 grade
Test range and display format:
Power Range: 0~4.5kW
within 1kW, display 0.0~999.9W;
within 1kW~4.5kW, display 1000~4500W;
Energy Range: 0~9999kWh
within 10KWh, display 0~9999Wh;
10kWh and above, display 10~9999kWh.
Voltage Range: 80~260V(display 80~260V)
Current Range: 0~20A(display 0.00~20.00A)
Note:
This module is suitable for indoor, please do not use outdoor.
Applied load should not exceed the rated power.
Wiring order can't be wrong.
Package Includes:
1x AC Voltmeter Ammeter
6. DROK Digital Multimeter LCD Display Voltmeter Ammeter DC 0-100V 0-15A Voltage Ampere Meter Electric Energy Power Time Multi-fuction Meter Battery Capacity Monitor Tester with Micro USB Powering Port
Feature
DROK multi-meter can display voltage, current, capacity, energy, time and temperature at the same time and test different kinds of batteries and DC voltage.Special Design: DROK battery meter is designed with 0.96" HD LED digital display and equipped with built-in system buzzer to protect the battery from the over-discharge.
Two different powering ways: one is seperate power supply interface, the other is micro USB port for powering, you can connect any one to power it.
Equipped with Alligator Clamps: the battery tester comes with Alligator clamps which will make you connect this meter more conveniently and easily.
Unique connecting way for all kinds of batteries with DC voltage 0-100V, you can diy wiring method to fit for your kinds of lithium batteries, cell phone batteries as well as a variety of DC power supply.
Description
Parameters:
Voltage Measuring Range: 1-100V/4-36VSimple power supply testing
Current Measuring Range: 0.000-15.000A
Accuracy: 0.001A/0.001V/0.001Ah/0.001Wh/0.001W/0.001
Cumulative Capacity Range: 0-99999mAh
Power Cumulative Range: 0-999999MWH
Power Metering Range: 0-299.999W
Impedance Range: 1-999.99
Temperature Range: 0-80
Timing Maximum Time: 999H 59M 59S
Timing Time Range: Current alarm set the countdown 24 hours
Time to refresh: >500mS/times
Measurement rate: 0.5 times/s
Warning Way: Siren sound + Screen dual warning display + Current cut down warning
Size: 48*29*21mm
Working Temperature-10~+60
Working Humidity: 10-80 no doubt
Working Air Pressure: 80-160kPa
Main Key Setting:
1. Long press in the main interface: Reset and cleared to zero the capacity, electricity and time (displays mAh, Wh, 00:00:00)
2. Double click: capacity reset and cleared to zero (mAh)
3. Triple click: electricity reset and cleared to zero (Wh)
4. Quartic click: time reset and cleared to zero (00:00:00)
5. Countdown five strike: automatic standby mode and current long standby mode set up
6. Continuously short press 6 times: interface in Chinese and English is switched
Package Includes:
1 X Digital Multi-function Meter
7. ANENG Mini Digital Multimeter with Buzzer Overload protection Pocket Voltage Ampere Ohm Meter DC AC LCD Portable
Feature
Highest Cost-Effective Mini MultimeterCharacteristics
Extra thin multimeter, small and nice
Card design, protable
With battery capacity test function
Description
Features:
Highest Cost-Effective Mini Multimeter
Characteristics
Extra thin multimeter, small and nice
Card design, protable
With battery capacity test function
Specification:
DCV: 200m-2000m-20-200-500V, 0.5%
ACV: 200-500V, 1.0%
DCA: 2000u-20m-200mA, 1.8%
Resistance: 200-2000-20K-200K-2000K, 1.0%
LCD size: 35x14mm
MAX display: 1999
Low battery indication: yes
Overload protection: yes
Diode test: yes
Continuity buzzer test: yes
Transistor test: yes
Battery test: 1.5V/9V
Power supply: one 12V 23A battery
Product size: 99x50x23 mm
Product weight: about 80g
Standard accessories: meter , test lead, manual, without battery(Battery Type-1pcs 23A 12V).
Package includes:
1 x ANENG Mini Digital Multimeter
1 set of test lead
1 x User manual
8. DROK Dual LCD Display DC Digital Multimeter Voltage Ampere Meter Voltmeter Volt Current Monitor with Shunt DC0-199.9V 0-19.99A for Battery Electric Vehicles
Feature
It is a voltmeter for testing DC 0-199.9V and also an ammeter for testing 0-19.99AIt's power consumption is 0.5VA and measure speed is 2 times per second, with a tiny size
Wide common ground power supply voltage (3-40v), dual LCD display dc voltage current meter with embedded installation
High measure accuracy of +/-1 percent 2 digits it can work under extreme condition, not direct exposure
It is commonly used in solar power systems, battery chargers, dc welding machine, sine wave inverter, electric vehicles, electric vehicles, electric car chargers and other equipment
Description
Parameters: Measuring Accuracy: +/- 1% 2 digits Displayer: LCD Measure Range: DC0-199.9V _0-19.99A Power Consumption: less than 0.5VA Measure Speed: 2 times per second Size: 70*40*39mm Installation Size: 68*38mm Extreme Working Condition Working Temperature: -10 +50 Degree Celsius Working humidity: 10 80%(No condensation) Working pressure: 80 106kPa Sunlight: no direct exposure Package includes: 1 x digital voltmeter Ammeter .9. AC Current Meter Panel, DROK Digital Electrical Ammeter Gauge AC 0-100A Amperage Panel Meter LCD Display Ampere Monitor Tester Amp Reader Case
Feature
Measuring range: DROK current meter panel measuring range is AC 0-100a (need current transformer, not includes in the package).Power supply: the digital ammeter power supply range is AC/DC 8-12v (isolated power).
Accuracy: our amp tester gauge measurement accuracy is 0.5 percent 2 digits.
LCD display: the ampere detector is designed with LCD display, character height is 20mm, Blue backlight.
Application: the ac current monitor meter can be used to substation automation, distribution automation, testing equipment, regulators ECT.
Description
Features:Measuring range: AC 0-100A (need current transformer)
Power supply: AC/DC 8-12V (isolated power, otherwise the instrument will be burnt)
Accuracy: 0.5% 2 digits
LCD display: character height is 20mm , blue backlight
Application:Substation automation, distribution automation, testing equipment, regulators ect.
Package include:
1x LCD Ammeter
(Does not include current transformer)
10. DROK LCD Display Digital Multimeter Voltmeter Ammeter AC 80-300V Voltage Current Meter Gauge 100A Volt Ampere Tester with AC Current Sensor Transformer,Two-wires Digital Volts Amp Monitor Panel
Feature
DROK micro digital multimeter voltage measuring range AC 80-300V, current measuring range 0-100A, with high accuracy of 1%2 digits.Multifunctional meter -- Display voltage and current on the same screen with different color (red for voltage, green for current).
Simple connection - Powered by the circuit being measured, no need to connect extra power source.
With precise CT - No need to buy another CT. Can be installed on anywhere flexibly.
Note: The AC voltmeter current can only use for pure AC 50Hz-electric power supply.
Description
Parameters:Measuring range: AC 80.0-300V; AC 0-100.0A
Measuring accuracy: 1% 2digits
Voltage display: Yellow LCD
Current display: Blue LCD
Size: 70*39*40mm
Wiring:
Green terminal: Voltage input
Blue terminal: Current transformer secondary input
Note: Please passing the wire of the measuring circuit through the hole of transformer.
Important:
1. Voltage input (yellow terminal) and current transformer secondary input (blue terminal) cannot be connected to be wrong, otherwise the instrument will be burned out.
2. It is only suitable for pure AC 50Hz-electric power supply. The meter will get permanent damage if you measure the square wave, dc-to-ac inverter output and modified sine wave.
Package Includes:
1x Digital Voltage & Current Meter
1x Current Transformer
