When you looking for normally closed solenoid valve, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable normally closed solenoid valve is not an easy task. In this post, we show you how to find the right normally closed solenoid valve along with our top-rated reviews. Please check out our suggestions to find the best normally closed solenoid valve for you.
Reviews
1. 1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve
Feature
Valve Type: 2 Way Normally Closed (Valve opens with energized) ; Port Size: 1/4" Female Port Coil Voltage: DC12V Service Media: Air, Gas, Liquid, Water ; Operation Model: Direct Acting; Flow Model: Uni-DirectionalThis solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized- and it opens when energized.
2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position.
100% Brand New By AOMAG. 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas.
Description
Description : 1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air ValveWIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas. This solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized, and it opens when energized. Has two holes in the bottom and can be mounted in any position. Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized. 2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). WIC Valve is compatible with SMC valves.Specification :
Model Number : 2ACK-1/4-12VDC-G
Valve Type : 2 Way Normally Closed (Valve opens with energized)
Service Media : Air, Gas, Liquid, Water
Operation Model : Direct Acting
Flow Model : Uni-Directional Flow Rate : 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow) Response Time : Less than 20 msBody Material : Anodized Aluminum Seal Material : NBR (Buna N) Armature Tube Material : Brass Plunger & Spring
Material : Stainless Steel Coil
Certification : CE Certification
Coil Power : 6.5W
Coil Class : F Class IP 65 (CE Certification)
Coil Duty : 100% ED (Continuous Duty)
Operating Pressure : Vacuum to 115 PSI
Operating Temperature : -5 to 80 C
Port Size : 1/4" Inch NPT Female Port
Coil Voltage : 12V DC
Voltage Tolerances : DC : +10% -5% ; AC : +10% -15%
Electrical Connection : Grommet Coil with 12" Lead Wire2ACK Series Electric Solenoid Valve Dimensions :
Package included : 1 x 1/4inch DC 12V Electric Solenoid Air ValveDetails pictures
2. SNS 2W025-08 1/4" DC12V NPT Brass Electric Solenoid Valve Normally Closed Water, Air, Diesel
Feature
2 way solenoid valve, 14/" NPT port, brass body, DC12 voltHigh quality normally closed electric solenoid valve, for water, air or oil
Working temperature range: -5-85
It's applicable in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.)
We have solenoids available in AC/DC and various size NPT threads as well
3. 1/2" Stainless Steel Electric Solenoid Valve 12V DC Normally Closed
Feature
U.S. Solid valve- industrial grade products.1/2" Stainless Steel direct acting with VITON gasket.
ISO/OEM/ODM/CE
1 year warranty. Contact [email protected]
Versatile, small, responsive, light and durable.
Description
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a stainless steel body, one-half inch (1/2") female threaded (NPT) connections, and heat and oil resistant Viton gasket.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.
Brand: U.S. Solid
Model: USS2-00069
Size: 1/2"
Flow Aperture: 16 mm
Body Material: Stainless steel
Gasket / Diaphragm / Seal: VITON
Rated voltage: DC 12 V, 10%
Current: 1.667 A
Power rating: 20 W
Operation Type: Semi-direct Lift Valve
Operation Mode: Normally Closed
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)
Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 4.8 Cv
Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.
Quality assurance: CE Certified
4. BACOENG 1/2" NPT AC110V Brass Normally Closed Electric Solenoid Valve Air Water Oil
Feature
1/2" AC110V Solenoid Valve Both power lines can be connected with positive and negative polesInlet/Outlet Ports:1/2" Female NPT Threads (18 threads per inch / US Standard)
Valve Type:Direct Acting, Wet Armature
Body Material: Brass
Suitable Media:Air Water Oil
Description
1/2" AC110V Solenoid Valve2W-025-15
Voltage: AC110V
Body Material: Brass
Suitable Media:Air Water Oil
Valve Type:Direct Acting, Wet Armature
Operation Mode:Normally Closed
Inlet/Outlet Ports:1/2" Female NPT Threads (18 threads per inch / US Standard).
Plunger Tip:NBR
5. 3/4" 110V Brass Electric Solenoid Valve AC Normally Closed water, air, diesel.
Feature
High Quality3/4" Brass direct acting with VITON gasket.
ISO/OEM/ODM/CE
1 year warranty. Contact [email protected]
Versatile, small, responsive, light and durable.
Description
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, three-quarter inch (3/4") female threaded (NPT) connections, and heat and oil resistant Viton gasket.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.
Brand: U.S. Solid
Model: USS2-00007
Size: 3/4"
Flow Aperture: 20 mm
Body Material: Brass
Gasket / Diaphragm / Seal: VITON
Rated voltage: AC 110 V, 10%
Current: 0.191 A
Power rating: 21 VA
Operation Type: Semi-direct Lift Valve
Operation Mode: Normally Closed
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)
Flow capacity: 7.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 7.6 Cv
Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc.
Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.
Manufactured in China. Quality assurance and/or conformity managed in accordance with standards:
ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.
6. 1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (standard USA pipe thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid.
Feature
VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket.1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in U.S..
SOLID BRASS. This valve's body is made of solid brass (very corrosion resistant material).
WARRANTY-all U.S. Solid valves come with a 1 year warranty. Contact [email protected]
DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid's magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized.
Description
1/4" NPT port, brass body, VITON seals, 12 volt DC, for air, water, or fuel (disel, gasoline, oils and other hydrocarbons).
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton seals.
The direct current coil energizes at 12 volts DC; (It doesn't not matter which line is positive and which is negative, the valve will energize identically) Voltage range + or - 10%. 12 Watt power rating.
Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.
1/4" (2.5 mm) flow aperture permits a unidirectional flow capacity of 0.23 gallons per minute (GPM) of water at 60F with a pressure drop of 1 PSI (0.23 Cv).
Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank, auxiliary gas tanks and many other.
Manufactured in China. Model: USS2-00051. Quality assurance and/or conformity managed in accordance with standards:
7. -NEW- Solenoid Valve 1/4" Normally Closed (N.C.) 12VDC Nylon (NEW Improved Crack-resistant Polymer) Blue Cap by U.S. Solid
Feature
TRY OUR NEW IMPROVED FORMULA NYLON.U.S. Solid valve- industrial grade 1/4
1 year warranty. Contact [email protected]
Versatile, small, responsive, light and durable.
To be used with water and within limited temperature range.
Description
All blue cap valves are designed with new polymer formula engineered to withstand 20% more tightening torque without cracking the polymer body. U.S. Solid Normally Closed Electric Solenoid Valve;
1/4" ports, engineering plastic(Nylon) body, nitrile rubber (NBR) seal, 12 volt DC, for air, water
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a Nylon, engineering plastic body, two-way inlet and outlet ports with one-quarter inch (1/4") female threaded (NPT) connections. Nitrile rubber (NBR) gasket.
The coil uses direct current and energizes at 12 volts DC; voltage range + or - 10%. 4.8 Watt power rating.
Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.
1/4" (2.5 mm) flow aperture permits a unidirectional flow capacity of 0.23 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (0.23 Cv).
Operational temperature range is 23 to 176 degrees Fahrenheit; -5 to +80 degrees Celsius. Suitable for outdoor use; not suitable for underwater.
Suitable for use with hot or cold water, air, very low viscosity fluids (< 20 cst). NOT design for use with gasoline or organic solvents. Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve. In cases where this is necessary, it is recommended user install a computer fan to keep valve cool.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.
Manufactured in China. Model: USS2-00005. Quality assurance and/or conformity managed in accordance with standards:
ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.
8. 1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve
Feature
.WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum).
.Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
.This solenoid valve has one 1/4" inch NPT inlet and one 1/4" inch NPT outlet port. Valve stays close when the coil is de-energized- and it opens when energized.
.1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas.
Description
Feature:Port Size : 1/4"
Model Number: 2V025-1/4-12VDC
Seal Material: NBR (Buna N)
Armature Tube Material: Brass
Body Material: Anodized Aluminum
Plunger & Spring Material: Stainless Steel
Response Time: Less than 20 ms
Port Size: 1/4" NPT Female Port
Operating Temperature: -5 to 80 C
Coil Power: 6.5W
Flow Model: 0.23Cv Uni-Directional
Coil Duty: 100% ED (Continuous Duty)
Coil Voltage: AC220V, DC24V, DC12V
Service Media: Air, Gas, Liquid, Water
Valve Type: 2 Way Normally Closed (Valve opens with energized)
Flow Rate: 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow)
Operating Pressure: 0 - 0.7Mpa(can be operated at 0 PSI (Vacuum))
Package included:
1 x 1/4inch DC 12V Electric Solenoid Air Valve
9. ASCO 8210G002-120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 5/8" Orifice, 4 Cv Flow, 120V/60 Hz, 110V/50 Hz
Feature
Long service life and low internal leakageHigh flow valves for liquid, corrosive, and air/inert gas service
Normally closed operation
Description
ASCO's 2-Way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. The two types of operations are Normally Closed (NC) and Normally Open (NO). Two types of constructions apply to 2-way solenoid valves, which are direct acting and internally piloted. With Direct acting constructions, the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open Valve. The valve will operate at pressures from 0 psi to its rated maximum. Internally piloted constructions use line pressure to assist operation. When the coil is de-energized (on a Normally Closed Valve), the pilot orifice is closed and line pressure is applied to the top of the piston or diaphragm through the bleed orifice, closing the valve.10. BACOENG 1/2" AC110V NPT Stainless Steel Normally Closed Electric Solenoid Valve
Feature
1.Inlet/OutletPorts:1/2",ThreadStandards:NPT,Material:StainlessSteel(Safeforfood)2.Theunitoperateson110VACpower.ItsN/C(normallyclosed),meaningitisclosedwhenpowerisn'tsupplied.
3.Highqualityreplacementpartforusewithpipelinesinwater,airanddieselapplications.Workingtemperatureoftheproductis23Fto176F.
4.Installationiseasy.Arrowshowsflowdirection.Bothcablescanbeusedaspositiveornegative.
5.12VDCSeries:a.co/9HZBR8y110VACSeries:a.co/bLADMSUNormallyOpenSeries:a.co/4sfdvUuOthers:CheckinBACOENGStore.
Description
Specifications:
1.Suitable Media:Air Water Oil .
2.Operation Mode:Normally Closed (Opens when powered)
3.Plunger Tip:NBR
4.Working Pressure:0-1.0Mpa
5.Fluid Temperature: -5-80 Degrees Celsius / 23F to 176F
6.Operating Viscosity: Under 20CST
7.Valve Type:Direct Acting, Wet Armature. Semi-Direct lift valve. Suitable for gravity feed.
8.Installation: Fluid direction should be as the arrow shows .
9.Versatile, small, responsive, light and durable.
10. One year warranty. Contact [email protected]
Product Description:
1).1/2"ports, brass body, Viton seal, 110 volt AC, for air, water, or oil
2).BACOENG normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with 1/2 inch female threaded (NPT) connections, and heat and oil resistant Viton gasket.
3).The coil uses alternating current and energizes at 110 volts AC; voltage range + or - 10%. 18 Watt power rating.
4).Semi-direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.
5).Operational temperature range is 23 to 176 degrees Fahrenheit; -5 to +80 degrees Celsius. Suitable for outdoor use; not for use underwater.
Application:
1).Suitable for use with hot or cold water, gases, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
2).Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems or to control flow of propane gas. This solenoid valve serves as an excellent propane regulator.
Package Includes:
1 x Electric Solenoid Valve
1 x User Manual
