When you looking for tpa3116d2 2*100, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable tpa3116d2 2*100 is not an easy task. In this post, we show you how to find the right tpa3116d2 2*100 along with our top-rated reviews. Please check out our suggestions to find the best tpa3116d2 2*100 for you.
Reviews
1. WINGONEER TPA3116D2 2x50W+100W 2.1 Channel Digital Subwoofer Power Amplifier Board DC12V-24V
Feature
Adopts two high quality TPA3116D2 digital amplifier chips.Sound quality is very good, high efficiency and amplifying power.
50W*2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
User can adjust the volume by themselves easily.
Powered by DC 12-24V, wide input voltage.
Description
WINGONEER trademark Reg.NO:4747611Notice:
This amplifier board must be powered by DC power(DC12-24V), it's better to use high-performance switch power. Don't use transformer!
Specifications:
Supply Voltage: DC 12-24V
Chip: TPA3116D2
Channel Type: 3 Channels(Left Channel, Right Channel, Subwoofer)
Output Power: 50W*2 + 100W*1 Subwoofer
Output Match: 4-8 ohm
Audio Output: Terminals
Frequency Response Range: 14-100KHz
SNR: 100dB
Switching Frequency: 1.2MHz
PCB Board Size: 100 * 70 * 30mm / 3.94 * 2.75 * 1.18in (L * W * H)
Weight: 113g / 3.98oz
Package Size: 13.5 * 11 * 5cm / 5.31 * 4.33 * 1.97in (L * W * H)
Package Weight: 167g / 5.9oz
What is included:
1x WINGONEER 2.1 Channel Audio Amplifier Board
1x WINGONEER Audio Cable
2. AOSHIKE 100Wx2 TPA3116D2 Audio Amplifier Board Amplificador High Power HIFI Digital 2.0 Dual Channel Amplifier Board(100W x 2)
Feature
The TPA3116D2 is an Efficient Class D Audio Amplifier Integrated 120m MOSFET that allows high output current up to 7.5A allows the amplifier to provide an excellent audio performance without the need for a bulky heatsink. This device can be configured to use master-slave operation of the sync pin. This helps to prevent the sound of beat noise.COMPREHENSIVE PROTECTIONS:: short-circuit/over-heat/over-pressure and direct current
DC10-25V Car Stereo AMP Module for Computer Vehicle Auto Audio System DIY Speakers with Volume Knob Double Chips Heatsink
HIGH EFFICIENCY,HIGH POWER,LOW CONSUMPTION,HIGH RESOLUTION AND LOW DISTORTION
NOTE:Power supply cannot be connected to the output interface of the speaker, otherwise the chip will be damaged,Please see the reference picture,hope it can help you
Description
Product Name: Digital 2.0 power amplifier board
Power amplifier chip: TPA3116D2
Input voltage: DC10-25V
Output power: max 100W * 2
Number of channels: left and right channel
Output impedance: 4-8ohm
Frequency response range: 14-100KHZ
Signal to noise ratio: not less than 100db
Switching frequency: 1.2MHZ
Size: 67 * 60mm
Package included:
1PC TPA3116D2 Audio Amplifier Board Amplificador 100W * 2
3. Digital Power Audio Stereo Amplifier Board 2.1 Channel, Covvy DC 12-24V TPA3116D2 2x50W+100W AMP Module for Audio System DIY Speakers
Feature
Two TPA3116D2 Chips - one for the left/ right channel power amplify and the second is in bridge connection with the front NE5532 to drive the subwoofer.DC 12-24V wide input voltage; 3.5mm audio input jack; 3-pin audio input jack; Volume/ Subwoofer/ Stereo knob adjustment.
50W*2+100W 2.1 channels (left+right+subwoofer), high efficiency and low heat.
Users can easily adjust the volume, just connect the power and speakers that you can enjoy pure digital music.
Sound quality is very good, high efficiency and amplifying power. Great for great for connecting to telephone or computer, DIY speaker, vehicle auto stereo, etc.
Description
Specifications:Chip type: TPA3116D2*2
Power supply: DC 12-24V
Output power: 50W*2 100W*1(Subwoofer)
Output load: 4-8
Respond range: 14-100KHz
SNR: 100db
Channel amount: 3 (left+right+subwoofer)
Switch frequency: 1.2MHz
Weight: 136g
Size: 100mm*70mm*30mm (L * W * H)
Package Included:
1* Digital Subwoofer Power Amplifier Board
4. 2.1 Channel TPA3116D2 Digital Amplifier Board, 2 50W +100W Subwoofer Power Audio Sereo AMP Module, DC 12~24V Stereo AMP Module for Car Home Audio System DIY Speakers (50W+50W+100W)
Feature
Adopts two TPA3116D2 digital amplifier chips, one for the left/ right channel power amplify and the second is in bridge connection with the front NE5532 to drive the subwoofer.Digital amplify chip, up to 90% efficiency, low idle loss and high heat dissipation; 1.6mm circuit board, smooth surface, heat resistant and tide resistant.
With DC power supply connection port and DC 12-24V wiring terminals (please do not use in the same time); 3.5mm audio input jack; 3-pin audio input jack; Volume/ Subwoofer/ Stereo knob adjustment.
Several symmetrically mounted capacitances, big capacity, great filtering and energy storage function; Inductance coil has inhibition for the AC; European style wiring terminal.
Great for connecting to telephone or computer; DIY speaker; vehicle auto; home theater; music playing on the street/ square/ shopping mall sound amplify.
Description
Specifications:Input Voltage: DC 12-24V
Chip: TPA3116D2 * 2
Output Power: 50W * 2 + 100W Subwoofer
Channel Type: 3 Channels(Left Channel, Right Channel, Subwoofer)
Output Impedance: 4-8 ohm
Frequency Response Range: 14-100KHz
SNR: 100dB
Switching Frequency: 1.2MHz
PCB Board Size: 10.0 x 7.0 x 3.0cm / 3.94 x 2.75 x 1.18in (L x W x H).
Package Included:
1 x 2.1 Channel Amplifier Board
5. TB20A TPA3116D2 Stereo Amplifier 2.1 Channel Class D Audio Amp with Subwoofer Volume Control 2x50W 1x100W Sub Output Super Bass Power Receiver, Treble Bass Independent Adjustment + Power Supply
Feature
Come with the 19V power adapter that can be carefully matched with this integrated amp physically as well as electrically. Unlike other amps come with a 12V power supply, The power supply is very important for a digital amp if you need clear sound !With subwoofer volume control, L and R channels Treble&Bass independent control, subwoofer frequency adjustment control.
Adopt Texas Instruments TPA3116D2 * 2 chips, small simple compact design but practical and powerful, can drive 2-8ohm, 20-200Watts speakers;
Best for bookshelf/ computer/ desktop /TV speakers, can use Phone/ MP3 player/ DC/ TV/ Echo Dot as input.
Manufacturer-Direct, free lifetime technical support, and 18-month manufacturer's warranty.
Description
Additional Notes:
🍎Please plug the power cord into the amp THEN the wall.
Parameter:
1. Power supply range: 12v-25v;
2. THD: 0.04%;
3.Frequency Range: 20Hz - 20kHz (1 dB);
4.SNR: 98dB;
5. Inputsensitivity: 280mV;
6. Terminatingimpedance: 2Ohm - 8Ohm;
7. Output power: 50W + 50W + 100W Sub;
8. Input mode: Analog;
9. Power supply: 19V 4.74A 90W;
10.Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.
6. Nobsound 100W Bluetooth 4.2 TPA3116D2 2.0 Channel Digital Power Amplifier Board Stereo Amp Home Speaker Car Audio Treble Bass Tone Control (DP3)
Feature
Bluetooth 4.2 and stereo 3.5mm Audio input 2-In-1(Bluetooth input priority), Stream music from your cell phone to your speakers wirelessly.2PCS NE5532 Op-amp, full in low frequency and distinct in gradation
Treble & Bass independent tone control
Can be powerd by notebook switching power supply and 12V-24V ordinary battery. It is very convenient to do as home and car amplifiers.
Description
Parameters:Chip: TPA3116D2
Power supply: DC 12-25V
Interface: outer diameter 5.5MM inner diameter 2.1MM
Power: 50WX2 (tested under DC24V)
Board size: 72*88 mm / 2.83*3.46 in
Operational Notes:
Turn the knob to the far left and then connect DC power before turning on the power, This can avoid the impact of booting
First turn the volume knob to the lowest and then unplug the DC power, This can avoid the impact of shutdown
The indicator light is always on after power on and is not controlled by the switch
Package Includes:
1 Assembled Board
7. Nobsound HiFi TPA3116D2 2.1 Channel Digital Audio Power Amplifier Stereo Amp 250W+100W Subwoofer Treble Bass Independent Adjustment (with Power Supply)
Feature
200W high power 2.1 channel digital amplifier can offer 100W for subwoofer and 50W for each channelWith TREBLE & BASS independent control for left and right channels
With BASS VOL & FREQ independent control for subwoofer volume and frequency adjustment
Sound is analytical and clear with balanced tri-frequency and no background noise
Standard RCA & Banana jacks; With our high-quality and stable customized power supply
Description
Parameters:Channel: 2.1
Output power: 2*50W + 100W Subwoofer
Audio input: Stereo L/R RCA
Audio output: Banana Speaker Jacks
Size: 100*157*35 mm / 3.94*6.18*1.38 in (without protruding parts)
Net weight: 0.52 Kg / 1.15 lb
Package Includes:
1 * finished amplifier
1 * power supply
8. AOSHIKE Update TPA3116D2 Digital Amplifier Board 2.1 Channel High Power Audio Amplifier Board 2x80W+100W DIY Speaker Home Theater
Feature
Big heatsink chip mounted on the surface of the amplify module; The heatsink is with array construction which is more easy for heat dissipationDC12-26V 80Wx2+100W 2.1 channel audio amplifier board; Great for DIY sound system; high power broadcast; home theater; music playing on the street/ square/ shopping mall sound amplify
TPA3116D2 chip, with >90% power efficiency and low idle loss characteristic;
With comprehensive protection of short-circuit; over-temperature; over/less voltage; direct current
Description
Features:
DC12-26V 80Wx2+100W 2.1 channel audio amplifier board; Great for DIY sound system; high power broadcast; home theater; music playing on the street/ square/ shopping mall sound amplify
TPA3116D2 chip, with >90% power efficiency and low idle loss characteristic;
With comprehensive protection of short-circuit; over-temperature; over/less voltage; direct current
Product name:2.1 channel audio amplifier
Chip model:TPA3116D2*2
Supply voltage:DC12-26VRecommend DC24V)
Current: more than 3A
Output power:80W*2+100W(Subwoofer)
Output Impedance:4-8ohm
Frequency range:14-100Khz
SNR:100db
Number of channels:3(left channel,right channel,subwoofer)
Size:116*74*29mm
Product net weight:126G
Package included:
1PC DC12-26V 80Wx2+100W 2.1 channel audio amplifier board
9. TPA3116D2 Amplifier Board, 2.1 Channel Class D Digital Power Audio Stereo AMP Module 2 x 50W+100W(Left,Right & Subwoofer) for Audio System DIY Speakers, XH-M139
Feature
This easy-to-use 2.1 amplifier board is big on power, delivering 50 watts into stereo channels and an additional 100 watts into a mono subwoofer channel. Use this board for multimedia sound systems, boom box projects, digital signage, or even mobile audio.Pre-assembled and pre-tested for easy project integration, which makes your project easy to complete. The on-board jacks, potentiometers, and screw terminals mean you can get this board powered up and playing music in minutes.
3.5 mm audio jack, 2.1 mm DC power jack, and phoenix speaker connectors for easy hookup, an optional 3-pin connector for internal line-in audio is available (wiring harnesses not included).
The amplifier board uses TPA3116D2 chip as core which is a high-performance digital power amplifier chip. Built-in volume, subwoofer, and satellite potentiometer for sound customization.
Wide voltage power supply from 12V to 24V DC, energy saving design, the efficiency is high.
Description
Features:
- Class D efficiency in a compact size
- 12 to 24 VDC for versatility
- 2 x 50W plus 100W into a mono channel for 2.1 applications(left/right and subwoofer channel)
-Adopts two high-quality TPA3116D2 digital amplifier chips.
-A user can adjust the volume by themselves easily.
-Applicable speaker impedance: 4-8 ohm.
Specification:
Chip type: TPA3116D2 x 2
Power supply: DC 12-24V
Output load: 4-8
Output power: 50W*2(Left & Right) 100W*1(Subwoofer)
Frequency Response Range: 14-100KHz
SNR: 100db
Channel amount: 3 Channels(Left Channel, Right Channel, Subwoofer Channel)
Switch frequency: 1.2MHz
Signal input: 3.5 mm stereo jack or 3-pin socket
Signal output: 6 screw terminals
Power requirements: 12-24 VDC
Power input: 2.1 mm x 5.5 mm DC jack
This handy audio amplifier board has big power in a small package. Delivering 2 x 50W plus 100W into a mono channel, this 2.1 board makes it easy to add the bass you need to your next powered speaker project. Use this board in desktop multimedia powered speakers or cool boom box applications. The tiny size makes implementation limitless and the easy-to-use 12 VDC power requirement makes it a great addition to any mobile audio project.
These boards are pre-tested and pre-assembled, which makes your project easy to complete. The onboard jacks, potentiometers, and screw terminals mean you can get this board powered up and playing music in minutes. Just connect your power source using a 2.1 x 5.5 mm DC power plug, a 3.5 mm stereo audio source, and run speaker wire from the six screw terminals to your speakers and you are done. If you don't want to use the 3.5 mm jack, an optional 3-pin connector for internal line-in audio is available (wiring harnesses not included).
Package Included:
1 x TPA3116D2 Amplifier Board
10. UEB 2x100W TPA3116D2 2-Channel Digital Audio Amplifier Board 12/24V for Arduino
Feature
This power amplifier board using TI import TPA3116D2 as the core, the official data sheet for the 50W*2, engineers read the data and then combined with their own experience with the way to develop a bridge 50W*2 dual core technology, up to 100W*2 in in theoryBecause of the chip for digital chip with high efficiency it can reach more than 90%, it has the advantages of high power and low heat
It is advanced power supply by more than 12-24V 100W DC switching power supply
The board for the finished plate hand is available, and when connected to the power supply and box, you can enjoy a new experienceto of pure digital music.
Size: approx. 120 x 65 x 22mm/4.72 x 2.55 x 0.86''
Description
Specification:Chip type: TPA3116
Input power: DC12-24V
Output power: 2*100W
Input resistance: 51K*2
Output matching: 4-8 Europe
Frequency range: 14-100Kz.
SNR: 100db
Output channel: 2 (left and right)
Size: approx. 120 x 65 x 22mm/4.72 x 2.55 x 0.86''
Weight: approx. 81g
Notes: Please allow 1-3cm error due to manual measurement and there will be different color as different display, please understand. Thanks.
1 x Digital Audio Amplifier Board
