If you looking for digispark usb then you are right place. We are searching for the best digispark usb on the market and analyze these products to provide you the best choice.
Reviews
1. DAOKI 5 PCS Digispark Kickstarter ATTINY85 Micro USB Development Board For Arduino
Feature
Support for the Arduino IDE 1.0+ (OSX / Win / Linux)Power via USB or External Source - 5V or 7 -35V (automatic selection)
On-board 500ma 5V Regulator
Built-in USB(and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
Description
Features:Support for the Arduino IDE 1.0+ (OSX / Win / Linux)
Power via USB or External Source - 5V or 7 -35V (automatic selection)
On-board 500ma 5V Regulator
Built-in USB(and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
8k Flash Memory (about 6K after bootloader)
I2C and SPI(vis USI)
PWM on 3 pins (more possible with Software PWM)
ADC on 4 pins
Power LED and Test/ Status LED (on Pin0)
Weight: 4g
Package included:
5 x Development Board
2. WYPH Digispark Kickstarter ATTINY85 Miniature USB Development Board for Arduino
Feature
Brand new and high quality.Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
Power via USB or External Source - 5v or 7-35v (automatic selection)
On-board 500ma 5V Regulator
Weight: 4G
Description
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
- Power via USB or External Source - 5v or 7-35v (automatic selection).
- On-board 500ma 5V Regulator.
- Built-in USB (and serial debugging).
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8k Flash Memory (about 6k after bootloader).
- I2C and SPI (vis USI).
- PWM on 3 pins (more possible with Software PWM).
- ADC on 4 pins.
- Power LED and Test/Status LED (on Pin0).
- Size: 1.8cm x 2.6cm .
Package Included:
1 X USB Digispark Kickstarter ATTINY85 Miniature USB Development Board for Arduino
3. TOOGOO(R) Attiny85 Board development board USB For Arduino Digispark
Feature
The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller (ofcourse a bit less powerful).With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this board is a great way to jump into microcontroller electronics.
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) Attiny85 Board development board USB For Arduino Digispark
Onboard 5V Regulator
Built-in USB
6 I/O Pins
8k Flash Memory (about 6k after bootloader)
I2C and SPI (vis USI)
PWM on 3 pins (more possible with Software PWM)
ADC on 4 pins
Power LED and Test/Status LED
Package Contents: 1 x development board
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
4. KKmoon 3pcs Digispark Kickstarter Micro USB Development Board for Arduino ATtiny85
Feature
Support for Arduino IDE 1.0+ (OSX/Win/Linux).Power via USB or External Source - 5V or 7-35V (automatic selection).
On-board 500mA 5V Regulator.
Built-in USB (and serial debugging).
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Description
Features:Support for Arduino IDE 1.0+ (OSX/Win/Linux).
Power via USB or External Source - 5V or 7-35V (automatic selection).
On-board 500mA 5V Regulator.
Built-in USB (and serial debugging).
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
8k Flash Memory (about 6k after bootloader).
I2C and SPI (vis USI).
PWM on 3 pins (more possible with Software PWM).
ADC on 4 pins.
Power LED and Test/Status LED (on Pin0).
Specifications:
Size: 25 * 20mm / 0.98 * 0.8in
Package Size: Approx. 6 * 4 * 1cm
Package Weight: Approx. 11g
Package List:
3 * Micro USB Development Board(with Pins)
5. Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board
Feature
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)Power via USB or External Source - 5v or 7-35v (automatic selection).
On-board 500ma 5V Regulator.
6 I/O Pins (2 are used for USB only if your program actively communicates over USB
Description
Support for the Arduino IDE 1.0+ (OSX/Win/Linux).Power via USB or External Source - 5v or 7-35v (automatic selection).
On-board 500ma 5V Regulator.
Built-in USB (and serial debugging).
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
8k Flash Memory (about 6k after bootloader).
I2C and SPI (vis USI).
PWM on 3 pins (more possible with Software PWM).
ADC on 4 pins.
Power LED and Test/Status LED (on Pin0).
Size: 1.8cm x 2.6cm .
Package Included:
1 x Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board
6. Frentaly Digispark Kickstarter Attiny85 USB Development Board for arduino
Feature
Newly Improved VersionDigispark is an Attiny85 based microcontroller development board similar to Arduino family
More economical, smaller but a bit less powerful than Arduino board
On-board 150ma 5V Regulator with 100% support for the Arduino IDE 1.0 + (OSX/Win/Linux)
Perfect sized to fit where Arduino boards will not fit in
Description
Newly Improved Version
100% Brand New
Digispark is an Attiny85 based microcontroller development board similar to Arduino family
More economical, smaller but a bit less powerful than Arduino board
A whole host of shields to extend its' functionality and the ability to use the familiar Arduino IDE
Great tool to help you understand electronics and develop a useful gadget on a fast track
Perfect sized to fit where Arduino boards will not fit in
Digispark comes fully assembled except for the two solder headers which are included in this package
Support for the Arduino IDE 1.0+ (OSX/Windows/Linux)
Powered via Micro USB female port 5V or 7v-35v external source(12v or less is recommended)
Built-in on-board 5V regulator
6 I/O pins (2 are used for useb only)
If your app actively communicates over USB, you can use all 6 even if you are programming vis USB)
8k Flash memory (6k after bootloader)
I2C and SPI (Via USI)
PWM on 3 Pins (More possible with software PWM)
ADC on 4 pins
Power LED indicator and Test/Status LED
Size: 2cm X 1.7cm
What is included in this package?
1 x Digispark Kickstarter Attiny85
1 x Pin headers (9 Pins)
7. SMAKN Digispark Kickstarter ATTINY85 Mini USB Micro Development Board for Arduino
Feature
Support for the Arduino IDE 1.0+ (OSX/Win/Linux).Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
On-board 500ma 5V Regulator.
Built-in USB.
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Description
*Support for the Arduino IDE 1.0+ (OSX/Win/Linux).*Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
*On-board 500ma 5V Regulator.
*Built-in USB.
*6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
*8k Flash Memory (about 6k after bootloader).
*I2C and SPI (vis USI).
*PWM on 3 pins (more possible with Software PWM).
*ADC on 4 pins.
*Power LED and Test/Status LED.
*Size:20mm * 18mm.
Feedback:
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much!
8. Puuli 2 Pcs Tiny85 GY Digispark kickstarter USB Development Board for Arduino
Feature
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)8k Flash Memory (about 6k after bootloader)
On-board 500ma 5V Regulator
Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
Description
Puuli 2 Pcs Tiny85 GY Digispark kickstarter USB Development Board for Arduino
Features:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
8k Flash Memory (about 6k after bootloader)
On-board 500ma 5V Regulator
Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
Built-in USB
I2C and SPI (vis USI)
ADC on 4 pins
Power LED and Test/Status LED
PWM on 3 pins (more possible with Software PWM)
Package included:
1 x Puuli 2 Pcs Tiny85 GY Digispark kickstarter USB Development Board for Arduino