When you looking for 3 jaw chuck 100mm, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable 3 jaw chuck 100mm is not an easy task. In this post, we show you how to find the right 3 jaw chuck 100mm along with our top-rated reviews. Please check out our suggestions to find the best 3 jaw chuck 100mm for you.
Reviews
1. LLDSIMEX K11-100 Chuck 3 Jaw Self-Centering Lathe Chuck 4"/100mm With Internal and External 2 Set Jaws
Feature
3 Jaw Self Centering Lathe Chuck, Sttructure of solid jawsDiameter: 4" ; Thickness: 2.165"
Max. Imput Torque: 60Nm
Max. Speed: 3500r/min
Weight: 3.2Kg
Description
Short cylindrical center mounting Provide with one-piece jaw( include a set of internal jaws and a set external jaws) Supplied with T-Wrench2. K11-100mm CNC Router Engraving Machine Rotational A 4th Axis 100mm 3 Jaw Chuck+65mm Tailstock (Reducing ratio:6:1)
Feature
Chuck Type:K11-100mm 3 Jaw ChuckStepper motor: Nema23 2-phase 57 stepper motor
Center height: 65mm;Total height: 115mm
Reducing ratio: 6:1(belt deceleration mode)
Accessories: Set of Anti-claw and wrenches
Description
Package include:
1set 4th axis K11 100mm ( Includes stepper motor and 3 jaw chuck)
1 x 65mm Tailstock
Descriptions:
Chuck type:K11 100mm three jaw centering chuck
Center height:65mm
Total height:115mm
Angle:0.3/ step
Gear box output shaft diameter:25mm
Reducing ratio:6:1(belt deceleration mode)
Stepper motor:Nema23 57mm 3A 2-phase 4 wire
Accessories:Set of Anti-claw and wrenches
The fourth axis parameter settings:
Mach3 system settings:the pulses required for 1
(Motor 1 lap pulses x Driver fine fraction x Reduction ratio) 360
For example:57mm 2- phase stepper motor, fine fraction of 16, reduction ratio 100:1
(200 x 16 x 100) / 360=888.88888888)
Weihong system settings:1 pulse along the angle
360/(Motor 1 lap pulses x Driver fine fraction x Reduction ratio)
For example:57mm 2- phase stepper motor, fine fraction of 16, reduction ratio 100:1
360 / (200 x 16 x 100) =0.001125
Tailstock type:
Center Height:65mm
Stretch distance:50mm
Top tip: Activity type
Axial locking wrench for tailstock
Stepper Motor:
Nema23 stepper motor 76mm
Shaft Diameter: 8mm
Shaft length: 25.5mm
StepAngle:1.8
Current: 3A
Voltage: 4.2V
TemperatureRise:80 cmax
Insulation Resistance:100MOhm(500V DC)
Holding Torque:18kg.cm
3. CNC 4th Axis Rotary Router Rotational Axis 3 Jaw 100mm Chuck+Wood Tailstock
Feature
CNC 4th Axis Rotary Router Rotational Axis 3 Jaw 100mm Chuck+Wood TailstockCNC 4th Axis Rotary Router Rotational
Description
Tailstock: Center Height: 65mm adjustable travel: 50mm Tailstock Product weight: 2.1kg CNC Engraving Router Rotational Axis,4th A Axis,3-Jaw Claw 100mm Chuck: Feature: stepper motor type: 57 stepper motor 3A2 phase 4 wires Chuck type: 100mm 3 claws centring chuck Step Angle: 0.3degree/step center height: 65mm total height: 115mm Total length: 220mm Reduction ratio: 6:1 Synchronous belt5M 350 Package Content 1 x 3A 57 Stepper Motor, 1 x 100mm 3 Jaw Chuck, 1 x Holding Aluminum frame, 1 x Belt4. SUNWIN CNC 4th Axis Rotary Router Rotational Axis 3 Jaw 100mm Chuck+Wood Tailstock
Feature
Rotational Axis: With K11 100MM 3 Jaw Centring ChuckMotorNema23 2-phase 57 stepper motor
Motor Electric current:3A
Motor Voltage:3V
Description
Rotational Axis:With K11 100MM 3 Jaw Centring Chuck
Center height65MM
Total height:115MM
MotorNema23 2-phase 57 stepper motor
Motor Electric current:3A
Motor Voltage:3V
Motor Holding Torque: 1.35N/M
Step Angle: 0.3degree/step
Reducing ratio61(Timing belt deceleration mode)
Synchronous belt3M
Weight:8KG
Tailstock:
Center Height: 65mm
adjustable travel: 50mm
Tailstock:Alive
with an axial direction spanner
Product weight: 2.1kgWhat is in box ?
1 x CNC Router Rotational Axis With 3 Jaw 100MM Chuck 6:1
1 x CNC Tailstock(Type C)
5. VEVOR Lathe Chuck 4 Inch Wood Turning Chuck Self-centering 3 Jaw Lathe Chuck 2 Set of Jaws (4 inch)
Feature
MAIN PARAMETER-3 jaw self-centering design lathe chuck. Diameter: 100 mm (3.94")QUALITY MATERIAL-Semi-steel body. Cast iron chuck body. All guideways and bearing surfaces are precisely machined
2 SETS OF JAWS-Internal and external jaw sets included. Internal clamping range: 2-30 mm (0.078"-1.18"). Jamming range: 30-90 mm (1.18"-3.54"). External clamping range: 30-80 mm (1.18"-3.15")
DURABLE IN USE-Both side of jaw teeth and guides are ground and hardened to HRC 58-62
APPLICABLE RANGE-The chuck is suitable for machine tools and accessories for general lathes, economical CNC lathes, grinding machines, milling machines, drilling and machine accessories, etc...
Description
4 Inch Lathe Chuck Self-centering 3 Jaw 100 mm Internal and External Jaw Sets
This 100 mm (3.94 inch) 3-jaw self-centering chuck features short cylindrical center mounting. It can be used to extend the machine functions. Both side of jaw teeth and guides are ground and hardened to HRC 58-62. Each chuck having gone through rigorous accuracy and repeated inspection.
Features:
Semi-steel chuck body made from high quality cast iron, durable in use
Accuracy is guaranteed in entire clamping range
One set of solid steel internal jaws, one set of solid steel external jaws and chuck wrench are included
Each chuck has gone through rigorous examination of accuracy and repeatability
Specification:
Size: 100 mm (3.94")
Outside Diameter: 100 mm (3.94")
Bolt Circle Diameter: 84 mm (3.31")
Center Thru Hole Diameter: 22 mm (0.866")
Chuck Body Thickness: 55 mm (2.16")
Internal Jaw Clamping Range (A-A1): 2-30 mm (0.078"-1.18")
Internal Jaw Jamming Range (B-B1): 30-90 mm (1.18"-3.54")
External Jaw Clamping Range (C-C1): 30-80 mm (1.18"-3.15")
Mounting Thread: 3-M8
Accuracy: 0.002"
Gross Weight: 7 lb (3.2 kg)
Package Dimensions (L x W x H): 5.5" x 5.5" x 5.1" (14 x 14 x 13 cm)
Package Content:
1 X 100 mm/4 Inch Lathe Chuck Body
3 X Internal Jaws
3 X External Jaws
3 X Mounting Bolts
1 X Safety Chuck Key
6. ROTARY TABLE 4" 100MM SELF CENTERING 3 JAW CHUCK with TAILSTOCK & CLAMPING KIT (1)
Feature
Rotary Table 4" Our 4" (100 mm) Rotary Table is Designed for smaller milling machines.100 mm Self Centering Chuck & Backplate
A high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground.
Clamping Kit M6
This Tailstock is mostly used in between our Rot
Description
Rotary Table 4" with 100 mm Self-Centering Chuck & Backplate Rotary Table 4" Our 4" (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16" (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. 100 mm Self Centering Chuck & Backplate A high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate & fixing tee nuts with screws. (though the picture is not showing the same) Designed to fit our 3 or 4" Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. TAILSTOCK This Tailstock is mostly used in between our Rotary Table 3" , Rotary Table 3" Tilting, Rotary Table 4" , Rotary Table 4" Tilting and Rotary Table 4" HV4 Models. It is used when between Centre Work is Required. These are adjustable for different hieghts & also having fine feed centre point and the centre tip is hardend and Ground. It is made up of good grade of cast iron. It is Very useful product to use. CLAMPING KIT M 6 These Clamping Kits is used with our 3" Rotary Table to clamp on the Machine Table. Set Contains 2 Clamps 4 LN Screws of M 5 Thread with 4 Flange nuts and 2 T-Nuts of Metric Thread. These are Polished and Ground from all the Sides.7. ROTARY TABLE 4" with 100MM SELF CENTERING 3 JAW CHUCK with BACKPLATE (1)
Feature
ROTARY TABLE 4" with 100MM SELF CENTERING 3 JAW CHUCK with BACKPLATEDescription
Rotary Table 4" with 100 mm Self-Centering Chuck & Backplate Rotary Table 4" Our 4" (100 mm) Rotary Table is Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16" (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position. 100 mm Self Centering Chuck & Backplate A high Quality 100 mm 3 Jaw Self centering chuck body made from SG Iron & Jaws are of Tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate & fixing tee nuts with screws. (though the picture is not showing the same) Designed to fit our 3 or 4" Rotary table with either 3 or 4 slots. The Back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play.8. PRECISION 4"/100 MM ROTARY TABLE WITH 100 MM 3 JAW SELF CENTERING CHUCK
Feature
4 Inches (100 mm) Rotary Table Designed for smaller milling machinesTable diameter 100 mm Table is graduated 360 Degrees.
SUPPLIED WITH 100 MM 3JAW SELF CENTERING CHUCK
Can be mounted both in Horizontal & vertical position
FAST EXPEDITED SHIPPING WITH TRACKABLE AWB NO. TO USA AND WORLDWIDE.
Description
4 Inches (100 mm) Rotary Table Designed for smaller milling machines. Table diameter 100 mm Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. Center Height in vertical position: 2-1/16" (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero. Can be mounted both in Horizontal & vertical position WITH 100 MM 3 JAW SELF CENTERING CHUCK.9. Sunwin CNC Router Rotational 4th Axis a Axis 3-jaw 100mm Chuck Gear Box 1700+tailstock
Feature
With K11 100MM 3 jaw centring chuckSpeed reducing ratio50:1 0.036 degree/step
Gear box output shaft diameter: 25mm
MotorNema 23 stepper 2-phase 4 wires 3A
Max.80mm with the opposite side of the claws.
Description
With K11 100MM 3 jaw centring chuckcenter height65MM
total height:115mm
gear box output shaft diameter: 25mm
MotorNema 23 stepper 2-phase 4 wires 3A
speed reducing ratio50:1 0.036 degree/step or 100:1 (0.018 degree/step)
Motor Holding Torque: 0.6N/M
Clamping Ability:
Max.30mm with the right side of the claws;
Max.80mm with the opposite side of the claws.
The default speed reducing ratio is 50:1
stepper motor shaft: 8mm
The default stepper motor shaft is 8mm
weight:7KG
Tailstock:
Center Height: 65mm
adjustable travel: 50mm
Tailstock:Alive
with an axial direction spanner
Product weight: 2.1kg
The default Tailstock is Type A
What is in box ?
1 x CNC 1700 Router Rotational Axis
1 x CNC Tailstock
10. CNC Engraving Machine Router Rotational a 4th Axis 100mm 3-jaw Chuck+tailstock
Feature
With K11 100MM 3 Jaw Centring ChuckTotal height:115MM
MotorNema23 2-phase 57 stepper motor
Step Angle: 0.3degree/step
Reducing ratio61(Timing belt deceleration mode)
Description
Rotational Axis:With K11 100MM 3 Jaw Centring Chuck
Center height65MM
Total height:115MM
MotorNema23 2-phase 57 stepper motor
Step Angle: 0.3degree/step
Reducing ratio61(Timing belt deceleration mode)
Synchronous belt5M 350
Weight:8KG
Tailstock : Type A
Center Height: 65mm
adjustable travel: 50mm
Tailstock:Alive
with an axial direction spanner
Product weight: 2.1kg
What is in box?
1 x CNC Router Rotational Axis With 3 Jaw 100MM Chuck 6:1
1 x CNC Tailstock(Type A)
