When you want to find nema23 closed loop, you may need to consider between many choices. Finding the best nema23 closed loop is not an easy task. In this post, we create a very short list about top 10 the best nema23 closed loop for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 nema23 closed loop:
Reviews
1. Nema23 2N.m 57 Hybrid Closed Loop Servo Motor 76mm+HSS57 Servo Driver Controller CNC Kit 24-50VDC For CNC Router Engraving Milling Machine
Feature
Holding Torque:2N.m;Current:3.0A;Phase:2Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver
Size:57x57x76mm;Step Angle(degrees):1.8deg
Voltage:DC24~50V;Insulation resistance:100MOhm(500V)
Type:Hybrid;Frequency:0~200KHz;Insulation class:B
Description
Package include:1x57BHH76Closed-loop servo motor
1 xHSS57Servo driver
Type:Hybrid
Phase:2
Current / Phase:3.0A
Step Angle(degrees):1.8
Holding Torque:2N.m
Size:57x57x76mm
Lead wire:4pcs
Insulation class:B
Insulation resistance:100MOhm(500V)
Frequency:0~200KHzWiring:
Red: A+
Green: A-
Yellow: B+
Blue: B-
2.HSS57 2-Phase Hybrid StepperServo Driver
2.1) Overview
HSS57 is 2 phase nema23 series hybrid stepper servo driver.
2.2) Features
2.2.8 Pulses response frequency can reach 200KHZ.
2.2.9 16 kinds microsteps choice, highest 51200microsteps/rev.
2.2.10 Voltage range: DC24~50V
2.2.11 Over-current, over-voltage and position ultra difference protection function.
2.3 ) Electrical Parameter
Peak currentPeak 6.0A (current change according to load)
Logic input current7~20mA
Suitable motor57HSE2N
2.4) Applications
Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, laser phototypesetting, graph plotter, cnc machine, automatic assembly equipment and so on.
2. GOWE 3 Phase NEMA23 1Nm Hybird Closed-Loop Stepper Motor Drive Kit 20~50VDC 3.5A 57mm CNC Engraving LC57H355+LCDA357H
Feature
Package: 1. motor LC57H355 2. drive LCDA357H 3. 3M Encoder cable& Power Cable Application: It is suitable all kinds of Small and medium-sized automation equipment and instrumentation. Such as carving machine, wire-stripping machine, marking machine, cutting machine, laser machine, plotting instrument, medical equipment, CNC, etc. This is efficient for the equipment with Low noise and high-speed.LCDA357H Drive functional characteristics Voltage range: 18~50 VDC maximum peak current: 7A Segmentation scope: 200 ~ 51200ppr Signal input: difference/single-ended, pulse/direction Optical isolation signal inputting, strong anti-jamming capability
Impulse response frequency: 200 KHZ Electricity parameter automatic setting function Closed-loop vector control, high speed and large torque output of motor, meanwhile, guarantee no step to lose Low vibration noise, Over-voltage, over-current, tracking error over proof protection function
Description
Package: 1. motor LC57H355 2. drive LCDA357H 3. 3M Encoder cable& Power Cable Application: It is suitable all kinds of Small and medium-sized automation equipment and instrumentation. Such as carving machine, wire-stripping machine, marking machine, cutting machine, laser machine, plotting instrument, medical equipment, CNC, etc. This is efficient for the equipment with Low noise and high-speed.3. UCONTRO iHSS57-36-10 CNC Closed-Loop NEMA 23 Integrated Stepper Motor with Driver Step+direction 57mm 36VDC 2N.M (Length 85mm)
Feature
Integrated compact size for saving mounting space100% rated output torque
Variable current control technology, High current efficiency
Small vibration, Smooth and reliable moving at low speed
Over current, over voltage and over position error protection
Description
IHSS57 Integrated Closed Loop Stepper Motor is all-in-one closed loop stepper system which integrates closed loop stepper motor with digital driver. Servo control and digital stepper driving technology are perfectly merged into this smart system. Optical encoder with high speed position sampling feedback of 50s built inside, can help system avoid losing-step, greatly improve low-speed instability and reduces noise. This Series products have the advantages of both stepper and servo, features in low heat, smooth motion, fast response, high speed and big torque output.Input Voltage: 24~50VDC(36V Typical)
Output Current: 4.5A 20KHz PWM
Pulse Frequency max: 200K
Communication rate: 57.6Kbps
Protection:
- Over current peak value 8A10%
- Over voltage value 80V
- The over position error range can be set through the HISU
Environment: Avoid dust, oil fog and corrosive gases
Operating Temperature: 70 MAX
Storage Temperature: -20~+65
Humidity: 40~90%RH
Cooling method: Natural cooling or forced air cooling
Motor Length: 85 mm
Shaft Diameter: 8 mm
Typical applications:
CNC, Printing, lazer, textile machine, etc.
4. GOWE CNC Stepper kits CNC Router NEMA23 3Nm Closed Loop Stepper Drive and Motor kits DC36V HBS860H+57HBS30 Easy Servo
Feature
1. Packing listing 1 PCS Drive HBS860H 1 PCS Motor 57HBS30 1 PCS Encoder Cable 3M 2. Drive functional characteristics Model HBS860H Type DSP Closed loop stepper drive maximum peak current 8A Impulse response frequency 200KHz Micro-stepping driver 200~51200ppr Voltage 20~80VAC/DC30-110VProtective function Over voltage, over current, tracking error, overproof Signal input Support PUL/DIR and CW/CCW modes (difference) Compatible 5~24V signal (Don't need a resistor) Advantage no step to lose, Low noise, little vibration and high efficiency, low heat Continuous overload Output an alarm signal Type of cooling Air-cooling
3. Motor electric parameter Step angle/phase 1.8 degree Rated voltage/current 4.52V/4A resistance 1.13ohm Inductance 3.6mH Hold torque 3NM Rated Speed 1000RPM Encoder 1000line Class of insulation B Rotor inertia 800 g.cm2
4. Appications desktop CNC routers, small CNC mills, laser cutters / engravers, dental mills, electronic assembly & inspection equipments, labeling equipments, pick & place machines, X-Y tables, scientific instruments... Especially for short-distance, short-time, fast start-stop and zero-speed stable stop.
Description
1. Packing listing 1 PCS Drive HBS860H 1 PCS Motor 57HBS30 1 PCS Encoder Cable 3M 2. Drive functional characteristics Model HBS860H Type DSP Closed loop stepper drive maximum peak current 8A Impulse response frequency 200KHz Micro-stepping driver 200~51200ppr Voltage 20~80VAC/DC30-110V5. NEMA 23 Closed Loop Stepper Motor System-Hybrid Servo Kit, 32 bit DSP Based: 282 oz-in
Feature
NEMA 23 Closed Loop Stepper Motor System-Hybrid Servo Kit32 bit DSP Based: 282 oz-in
Description
The Hybrid Servo Drive offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 3-phase stepper motor combined with a fully digital, high performance drive and an internal encoder which is used to close the position, velocity and current loops in real time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system. NEMA 23 Hybrid Servo kit (closed-loop stepper system): one Hybrid Servo Driver KL-5080H, one NEMA23 KL-23-2N-1000 Hybrid Servo Motor with one Encoder 1000 line6. GOWE Stepper Motor for NEMA23 36V 57mm Integrate Closed Loop Stepper Motor+Drive Kit 2NM Position Encoder IHSS57-36-20
Feature
Main features No Mis-Step The IHSS will overcome the Mis-Step issues with its in-corporation of the Position Tracking Technology, by integrating a Position Encoder behind the Step Motor. These will allow the Step Motor to behave like a Closed Loop Motor System, providing an automatic position correction, ensuring a higher degrees of positioning.Low Heat / High Efficiency 1. Current is adjusted automatically according to the actual Load, resulting in Lower Heat, as compared to traditional Step Motor Technology. 2. The Current is very minimal, producing no heat, during Stop condition. 3.It save energy and can achieve nearly 100% torque output. Working smoothly and accurately.
Smooth and Accurate With the Encoder feedback vector current control algorithm and filtering technique, it overcome the Low-Frequency Resonance problem. This will results in a smoother motion at low speed, overcome the noise and vibration concern, experienced by the traditional Step Motor system. High-speed response 1.Hybrid step servo system have some advantages of the traditional open-loop stepper system,
position response input and output command signal are almost real-time synchronization, so very suitable for condition of short distance quickly start / stop and zero-speed stop stably. 2.In condition of point-to-point fast positioning, advanced servo control technology provides a large torque output. It makes the system has a very high dynamic response, it is far over the limit of step system.
High Torque / High Speed 1. Hybrid Servo Drive System adopts the optimisation current control technique. This results in the full utilisation of the MotorTorque, eliminating the concern on Torque Redundancy in machine design. 2. Higher Torque can simplified the de-celebration of the equipment in certain applications. 3. With Hybrid Step Servo Drive system, the Higher Speed performance improves by 30% and effective torque improved by 70%, resulting in High Torque operation at High Speed.
Description
Main features No Mis-Step The IHSS will overcome the Mis-Step issues with its in-corporation of the Position Tracking Technology, by integrating a Position Encoder behind the Step Motor. These will allow the Step Motor to behave like a Closed Loop Motor System, providing an automatic position correction, ensuring a higher degrees of positioning.7. GOWE 57mm 0.64NM Stepper Motor Drive kits with Encoder 10000P/R 2Phase 24VDC 3A NEMA23 Closed Loop Stepper Motor Kit 57SMA-HC+57SDA-H
Feature
Characteristic: Four digital display, four key, easy-to-use, without complicated parameter adjustment. Encoder with 10000P/R, max 50000P/R. High-speed 3000RPM, High-torque, Small Dimension. Max 500KHz for mpulse Frequency Response Analysis. Located accurately, stable running, no step to lose. Stopping no adjustment, energy-efficient.Application Fields: Machine vision detection equipment, Medical Equipment, Labelling Machine, LCD cutting, small Engraving machines, Semiconductor processing equipment(Binding, Taping, sorting machine.)
Description
Characteristic: Four digital display, four key, easy-to-use, without complicated parameter adjustment. Encoder with 10000P/R, max 50000P/R. High-speed 3000RPM, High-torque, Small Dimension. Max 500KHz for mpulse Frequency Response Analysis. Located accurately, stable running, no step to lose. Stopping no adjustment, energy-efficient.8. GOWE Stepper Motor for 57J1880EC-1000+2HSS57 NEMA23 2.2NM 5A 2 phase 57mm Hybird Closed Loop Stepper Motor+Drive Kit with 1000line Encoder and Cable
Feature
Moedl: 57J1880EC-1000+2HSS57 Main application fields Advertising industry, Engraving, packaging, lasers, electron industry, medical industry, Printing industry, woodworking, machinery industry, Ceramic Industry, stone industry and so on. Brief introduction 2HSS two phase hybrid stepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include current loop,speed loop and position loop.This product has the advantage of both step and servo system, is a highly cost-effective motion control products. characteristic 1. Full closed loop control, motor encoder with 1000 line, close to 100% of the torque output 2. Segment set range is 2-256, fast response, high speed, light isolation fault alarm output interface ALM 3. Current loop bandwidth (-3 db) 2 KHZ (typical), speed loop bandwidth 500 hz (typical), the position loop bandwidth 200 hz (typical)
4. RS232 serial port communication available to download or change parameters; Over-current, over-voltage, undervoltage, overheating, speeding, differential protection; Alarm clear input ENA
Description
Moedl: 57J1880EC-1000+2HSS57 Main application fields Advertising industry, Engraving, packaging, lasers, electron industry, medical industry, Printing industry, woodworking, machinery industry, Ceramic Industry, stone industry and so on. Brief introduction 2HSS two phase hybrid stepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include current loop,speed loop and position loop.9. GOWE 3 Phase 4A 3NM NEMA23 57mm Closed-Loop Stepper Motor and Drive Kit 20~50VDC for CNC Engraving Machine LC57H3100+LCDA357H
Feature
Package: 1. motor LC57H3100 2. drive LCDA357H 3. 3M Encoder cable& Power Cable Application: It is suitable all kinds of Small and medium-sized automation equipment and instrumentation. Such as carving machine, wire-stripping machine, marking machine, cutting machine, laser machine, plotting instrument, medical equipment, CNC, etc. This is efficient for the equipment with Low noise and high-speed.Description
Package: 1. motor LC57H3100 2. drive LCDA357H 3. 3M Encoder cable& Power Cable Application: It is suitable all kinds of Small and medium-sized automation equipment and instrumentation. Such as carving machine, wire-stripping machine, marking machine, cutting machine, laser machine, plotting instrument, medical equipment, CNC, etc. This is efficient for the equipment with Low noise and high-speed.10. GOWE Stepper Motor+Drive Kit for NEMA23 36V 57mm Integrate Closed Loop Stepper Motor+Drive Kit 1NM Position Encoder IHSS57-36-10
Feature
Main features No Mis-Step The IHSS will overcome the Mis-Step issues with its in-corporation of the Position Tracking Technology, by integrating a Position Encoder behind the Step Motor. These will allow the Step Motor to behave like a Closed Loop Motor System, providing an automatic position correction, ensuring a higher degrees of positioning.Low Heat / High Efficiency 1. Current is adjusted automatically according to the actual Load, resulting in Lower Heat, as compared to traditional Step Motor Technology. 2. The Current is very minimal, producing no heat, during Stop condition. 3.It save energy and can achieve nearly 100% torque output. Working smoothly and accurately.
Smooth and Accurate With the Encoder feedback vector current control algorithm and filtering technique, it overcome the Low-Frequency Resonance problem. This will results in a smoother motion at low speed, overcome the noise and vibration concern, experienced by the traditional Step Motor system. High-speed response 1.Hybrid step servo system have some advantages of the traditional open-loop stepper system,
position response input and output command signal are almost real-time synchronization, so very suitable for condition of short distance quickly start / stop and zero-speed stop stably. 2.In condition of point-to-point fast positioning, advanced servo control technology provides a large torque output. It makes the system has a very high dynamic response, it is far over the limit of step system.
High Torque / High Speed 1. Hybrid Servo Drive System adopts the optimisation current control technique. This results in the full utilisation of the MotorTorque, eliminating the concern on Torque Redundancy in machine design. 2. Higher Torque can simplified the de-celebration of the equipment in certain applications. 3. With Hybrid Step Servo Drive system, the Higher Speed performance improves by 30% and effective torque improved by 70%, resulting in High Torque operation at High Speed.
