If you looking for shelving brackets 3.25 then you are right place. We are searching for the best shelving brackets 3.25 on the market and analyze these products to provide you the best choice.
Reviews
1. OneGrill Stainless Steel Weber Spirit Genesis Motor Bracket
Feature
304 rust proof stainless steel construction including hardwareUnique design allows motor to sit at angle avoiding low shelf clearances
Fits Spirit Models: 210 / 310. Fits Genesis Models: 310 & 330. Does not work with 2017 & Up Genesis II/Spirit II series grills
Safely provides 3.25 inches of heat safe offset
Mounting screws included. Fits standard 3 inch slide on motors and Weber brand motors; Clearance Should Be Measured On Motor To Ensure Fitment
Description
The OneGrill Stainless Steel Weber Fit Motor Bracket has been designed to accommodate the low shelving clearances of select Weber Grill models. Crafted of 304 stainless steel this bracket is designed to outlast the grill, while providing an attractive addition to your grill. Please measure clearance between mounting tabs on motor; many manufacturers have varying clearances. This motor bracket is backed by the OneGrill 1 year "No Hassle Warranty". Motor and spit rod not included.2. MyGift Wall Mount Corner Shelves, Storage & Display Shelving, Set of 3, Black
Feature
A set of 3 corner shelves made of metal with a classic black finish.Each shelf features a metal mesh base and a curved decorative railing along the 2 straight sides.
Install using the 4 mounting brackets on each shelf & appropriate mounting hardware (not included).
**Official MyGift product.**
Approximate Dimensions (each shelf, in inches): 15.5 W X 3.25 H X 11 D.
Description
Bring style, storage, and display space to your home with this set of 3 wall-mounted shelves. Each shelf in this set features a sturdy metal frame and a metal-mesh platform, both of which are coated with a classic black finish. All 3 shelves are designed to fit into a corner, and each shelf features 2 straight sides and a curved front edge. The straight sides feature a curved metal railing supported by vertical metal bars, and this railing also holds the 4 mounting brackets that allow you to attach each shelf to a corner section of wall using appropriate mounting hardware (not included). You can use these charming corner shelves to display photo frames and small plants in your living room or to store spices and canned goods in your kitchen.**Official MyGift product.**
Approximate Dimensions (each shelf, in inches): 15.5 W X 3.25 H X 11 D.
3. BarnwoodUSA Reclaimed Wooden Shelves - Set of 3 (8x8, 10x10, 12x12, white)
Feature
100% Up-Cycled Genuine Reclaimed Wood, Individually Hand CraftedShelves are 3.25 Inches Deep and also this Product may have splinters and random nail holes
Open Box Shelves Size Dimensions are 8x8 Inch, 10x10 Inch and 12x12 Inch
Decorate Your Shelves with Floral, Antiques, Pictures Whatever You Desire
Made in USA
Description
Display your keepsakes proudly and in a classic way. Our rustic wood box shelves have a rustic appearance with beautiful knots and nail holes here and there.
They are made of 100% up-cycled reclaimed wood and therefore, they are very sturdy. You can use these decor shelves for displaying flora, antiques, photo frames, mementos, artwork, memorabilia, and other small home decor items. All hardware included for easy installation.- Sold as a set of 3 - Dimensions of the three shelves for wall decor are 8x8 inch, 10x10 inch and 12x12 inch.
- Easy to hang. All hardware included.
- The shelves have depth of 3.5 inches.
- This decorative shelving set is perfect for home, offices, hotels, and other commercial places.
- It has a rustic look, with random nail holes.
- Sturdy and durable.
Order our shelving decor today and get 100% money back guarantee. Also, check out our other barnwood supplies such as photo frames, arrows, decorative ladders, and much more.
Free 4x6 inch when a product review is posted.4. Black Steel Pair of Log Brackets - 13 inch
Feature
Black Steel Pair of Log Brackets - 13 inch.Pair of Log Brackets Black Steel
Requires 2' x 4's (not included)
Cut to Desired Length and Height
3 1/4" Wide x 13" Long
Description
Black Steel Pair of Log Brackets - 13 inch. Features: Pair of Log Brackets Black Steel. Requires 2' x 4's (not included). Cut to Desired Length and Height. 3 1/4" Wide x 13" Long.5. Panavise 883-09 CCTV Dual Option 9-Inch Rise Adjustable Knob and Set Screw (Black)
Feature
9-Inch (228.6mm) overall mount length. Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875-Inch (22.2mm) in diameter].Use the Tri-Foot Base [4-Inch (101.6mm) outside diameter with three 0.265-Inch (6.7mm) holes on a 3.25-Inch (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails.
Full range of motion at the camera: 210-degrees Tilt, 360-degrees Turn & 360-degrees Rotation
Knob and tamper-resistant set-screw adjusting options included
0.25-Inch 20 mounting stud with lockring
Description
PanaVise is a major manufacture of CCTV Camera Mounts & Audio/Video Mounts. PanaVise's "Tilt, Turn & Rotate" technology has been applied to the CCTV Camera Mount Line & The Audio/ Video Mount Line. There's a camera mount available for every installation requirement! All PanaVise Products are covered by a Limited Lifetime Warranty!6. Dual Option Tilt Floor Stand Mount for Screens
Feature
Cream/White Dual Option 9" Rise - Tri-Foot Base - T-Bar Clip883-09W Dual Option Mount, 9" (Cream/White)
9" (228.6mm) overall mount length
Includes two mounting bases that screw easily into the machined aluminum alloy shaft (0.875"/22.2mm in diameter)
Use the Tri-Foot Base (4"/101.6mm outside diameter with three 0.265"/6.7mm holes on a 3.25"/2.5mm bolt circle) for solid surfaces, or the T-Bar Clip for drop ceiling rails
Description
Full range of motion at the camera: 210 Degree Tilt, 360 Degree Turn & 360 Degree Rotation7. Adj Single Bracket, 3 1/4x7 1/4 In
Feature
Price For: Each Material: Steel Stanley EDP Number: 5412 Stanley Class Number: 193888 Item: Adjustable Single Bracket Finish: Galvanized Length (In.): 3-1/4 Height (In.): 7-1/4 Width (In.): 2 Mounting: Wall Hardware: Included Country of Origin (subject to change): UnknownDescription
'Adjustable Single Bracket, Steel, Galvanized Finish, Length 3 1/4 In., Height 7 1/4 In., Width 2 In., Wall Mounting, Hardware Included, For Use With Corrugated Siding Due to Narrow Surface, Package Quantity 1'8. Organized Living freedomRail Spanner for freedomRail Closet System, 30-inch - Granite
Feature
Made with 30% more steel than other systemsEasy to install. Simply attach the Spanner between two freedomRail Uprights (sold separately) for extra storage
Adjusts easily without tools to fit your changing needs
The configuration allows multiple hooks to hang horizontally
Safe for the home. All freedomRail hardware components are epoxy coated and PVC-free
Description
The Organized Living freedomRail Spanner locks securely between two freedomRail Uprights (sold separately) to give you additional storage options. Add multiple freedomRail Hooks (sold separately) along the Spanner for versatile organization solutions throughout the home. Attach the Single Hook on Spanners to store scissors and supplies in a craft room. Use the Over The Door Can Holder (sold separately) on Spanners in the pantry for canned goods or use the Over the Door DVD Holder (sold separately) on Spanners in media rooms to organize movies.9. Industrial Heavy Duty Cantilever Bracket (Grey) - Federal Brace - Proudly Made in America (22.75 x 3.25 x 6.5)
Feature
Low-profile gusset doesn't impact seating space or knee room in tricky installations (i.e. bars, serving counters, computer labs)EASY installation with handy guide and online aid
Carry Capacity of 375 lbs. ensures your shelving, counters, bar, lab, or workspace is safe
Powdercoated soft grey for protection from wear and tear
MADE IN AMERICA to ISO:9001 certifications with high-quality materials and craftsmanship
Description
This support bracket has the capacity to hold a long bank of computers in school settings, or offices. The very low profile width will not interfere with sitting space or knee room. Powdercoated gray for protection and low cost for large quantity jobs.10. Gusto - 3.25" x 1.5" Black Plastic Label Holder
Feature
Dimensions: 3-1/4" l. x 1-1/2" w. x 1/2" h.Warranty: IMPORTANT NOTE: THIS PRODUCT IS INTENDED FOR COMMERCIAL USE ONLY. PRODUCT WARRANTY WILL BE VOID IF PRODUCT IS DELIVERED TO OR USED IN A RESIDENCE.
Material: Plastic