When you looking for solder wick braid, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable solder wick braid is not an easy task. In this post, we show you how to find the right solder wick braid along with our top-rated reviews. Please check out our suggestions to find the best solder wick braid for you.
Reviews
1. Vastar Solder Wick, 3 Packs Desoldering Wick, Solder Braid 2.5mm Width, 1.5m (5ft) Length
Feature
High quality desoldering braidUnique no clean flux for easy to use
Pure oxygen free copper wire
Geometrically-precise weave
Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz
Description
Vastar desoldering wick is high quality desoldering braid with unique, no clean flux with a size of 0.10"W (2.5mm) x 5"L (1.5m), 0.4 oz. (11g).The solder wick can clean some small or hard to reach areas, which will be a great accessory to remove extra solder.
Package included:
3 x Vastar Desoldering Wick
Warranty:
18-month warranty. For any question, please feel free to contact us. We will get back to you within 24 hours.
2. Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft.
Feature
Price For: Each Braid Material: Copper Width: 2.5mm Length: 50ft Braid Color: Blue Leaded Process Compatible: Yes Roll Length: 50ft RoHS Compliant: YesDescription
ITW CHEMTRONICS 10-50L BRAID, DESOLDERING, ROSIN, 50FT3. MG Chemicals #3 No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Green
Feature
No clean super wickFlux residue is non-conductive and non-corrosive
Static free bobbins
Flux residue remaining on board does not have to be cleaned
High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
NSF - Nonfood Compounds Program Listed P1, NSF Registration #154374
Description
No clean super wick. Flux residue is non-conductive and non-corrosive. Static free bobbins. Flux residue remaining on board does not have to be cleaned. High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III. ROHS Compliant.4. MG Chemicals Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 5' Length x 0.05" Width, Yellow
Feature
Oxide-free clean copperStatic free bobbins
Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
Manufactured under SPC guidelines
Designed to leave a residue that is environmentally safe
NSF - Nonfood Compounds Program Listed P1, NSF Registration #144208
Description
Any place you can put solder in, you can take it out with Super Wick. Remove the most expensive circuitry with confidence. Just lay the Super Wick on the soldered joint, apply tip of soldering iron to top-side for one second, and lift iron and Super Wick together to leave a clean connection ready for component removal or replacing. Super Wick is pure copper, specially woven wound on a pocket size spool with pressurized periphery. ROHS Compliant.5. NTE Electronics SW02-10 No-Clean Solder Wick, #4 Blue, .098" Width, 10' Length
Feature
Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxesResidue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
Available with standard or anti-static bobbins
Description
NTE Solder Wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.6. MG Chemicals Desoldering Braid #1 Fine Braid Super Wick with RMA Flux, 5' Length x 0.025" Width , White
Feature
Oxide-free clean copperStatic free bobbins
Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
Manufactured under SPC guidelines
Designed to leave a residue that is environmentally safe
NSF - Nonfood Compounds Program Listed P1, NSF Registration #144208
Description
Any place you can put solder in, you can take it out with Super Wick. Remove the most expensive circuitry with confidence. Just lay the Super Wick on the soldered joint, apply tip of soldering iron to top-side for one second, and lift iron and Super Wick together to leave a clean connection ready for component removal or replacing. Super Wick is pure copper, specially woven wound on a pocket size spool with pressurized periphery. ROHS Compliant.7. Aven 17542 Desoldering Wick, 2.5mm Width, 5' Length
Feature
High quality desoldering braidUnique no clean flux
Pure oxygen free copper wire
0.1"L x 5'L
Weight 0.6oz
Description
Desoldering wick. High quality desoldering braid with unique, no clean flux. Pure oxygen free copper wire. 0.10" (2.5mm) x 5'. 0.6 oz. (16g).8. Bastex Desoldering Wick and Pump Vacuum Solder Removal Tool & Solder Braid (2.5mm Width, 1.5m Length)
Feature
GENERAL USAGE: Bastex Solder sucker is a long aluminum plunger that allows you to suck the access melted solder away from the circuit board by creating strong suction to help clean spare solder on the pin. Especially helps in small, hard to reach areas. Best for through-hole connections. The Soldering wick braid helps clean spare solder on the pin away to prevent short circuits.PRODUCT FEATURES: Easy to use. Solder sucker features powerful, spring-loaded vacuum plunger for complete solder removal. Can be used by either the left or right hand giving you versatility for any soldering job. Soldering braid includes one and a half meters of length to absorb during your soldering jobs.
DURABILITY: The Solder vacuum is a solid construction with a plastic backing to ensure stability.. Soldering wick is made from pure oxygen free copper wire, no clean flux.
CONTENTS: One- solder sucker vacuum One-soldering wick braid Width 2.5 mm Length 1.5 mm
WARRANTY: This product carries a 30-day money back warranty and a 12-month replacement warranty. Satisfaction guaranteed.
Description
How to Use the Desoldering PumpStep 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.
Good for soldering and desoldering of electrical repairs, such as radios, resistors, capacitors, monitors, wires, circuit board, computers, video game consoles, etc.
9. OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) Desoldering Vacuum Pump Solder Removal Tool
Feature
Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
Solid Construction. The solder sucker has plastic backing to ensure stability.
Description
Get the solder off and replace them with newer ones, which it is very common when soldering, so this desoldering removal tool will be your perfect companion to suck the solder away effectively.
Suck the Solder Away Easily
The solder sucker measures 7.48X0.79, which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively.
Clean the Solder in Detail
2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. No clean flux, oxygen free copper wire. It will be a great accessory to remove the extra solder.
How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.
How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
Why Choose Us:
All Our Products are Produced under Strict Quality Inspection
12-Month Worry-Free Warranty and Free Life-time Technical Support
Professional After-Sales Team
99% Positive Amazon Feedback
Package Included:
1* Solder Sucker
1* Solder Wick
Warranty:45 days money-back and 12-month, worry-free Guarantee!
10. Solder Accessory Kit with CHP-170 Micro Soft Wire Cutter (5 Inch Diagonal, Flush Cut), Solder Braid/ Wick and Solder Sucker for Solder Removal and 16 Gauge Copper and Soft Wire
Feature
[Wide Application] XOOL Solder Accessory Kit is suited for jewelry maker, crafts, anyone fixing electronics or all kinds of hobbyists to remove solder and cut 16 gauge copper and soft wire. The flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge copper and soft wire. Solder sucker has powerful suction can quickly remove solder from circuit board.[Superb Quality]The CHP-170 Micro Soft Wire Cutter is made of heat-treated Hardened Carbon Steel, which is durable enough for cutting soft copper, steel wire, terminal wires easily. The solder sucker adopts new high-strength all aluminum construction that is resistance to beat, corrosion and have good heat dispersion. The excellent PETT sucker nozzle is resistance to high temperature and fusion. The push rod is made of durable stainless steel.
[Easy to use] After using the solder sucker, you just push the button and bye-bye messy solder. You -do- need to clean the tip of the solder sucker right away so it doesn't get clogged. The CHP-170 Micro wire cutter is an ultra-precise tool. It cuts fine with a clean and reverse angled cutting surface. Unique, user friendly, design includes return spring and Anti-slid handle for increased precision and control.
[Ergonomics Design] The handle of cutter is made of non-slip rubber/plastic without being to sticky, doesn't attract dust or dirt. And this anti-skid handle can improve work efficiency. The blades are hardened carbon steel, and after a long time show no nicking or bending. If you don't have adequate surface area for suction and removing the solder, you can use the solder wick.
[Labor-saving] The handle of cutter will protect your palm when cutting, softening the feel when applying cutting pressure. Spring back handles feel firm and just right for repeated cuts. High quality desoldering wick with a special chlorine-free flux can't damage precise tool and instrument. Desoldering pump has right or Left handed design allowing easy one-handed use.
Description
Suck Solder Easily: The solder sucker will fit your hands perfectly no matter if you are left-handed or right-handed. With all aluminum body and high pressure vacuum, our desoldering pump can help you suck the solder away effectively and quickly.Clean the Solder in Detail: 2.5mm wide, 1.5m in length and 0.4oz in weight, the solder wick can clean the solder in some small or hard to reach areas. It will be a great accessory to remove the extra solder.
How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.
How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
Package List:
1* Solder Sucker
1* Solder Wick
1* CHP-170 Micro Soft Wire Cutter Notes:
The solder sucker is only plastic, so be sure not to touch it to the soldering iron for a long time.
ALWAYS WEAR EYE PROTECTION and CUT WIRE MAX THICKNESS 16 Gauge
11. 10 Spools of Desoldering Braid (Copper Solder Wick) with flux, 1.5m (approx. 5 ft) per spool, 5 Spools @ 2mm wide plus 5 Spools @ 2.5mm wide
Feature
Width: 2mm (5 spools)Length: 1.5 m (approx. 5 ft) per spool
Width: 2.5mm (5 spools)
Individually bagged
Antistatic spool
