If you looking for mold release agent then you are right place. We are searching for the best mold release agent on the market and analyze these products to provide you the best choice.
Reviews
1. A + Form Release Agent 1 Gallon
Feature
Reduces cleanup timeCan be used on a variety of surfaces
Will not interfere with bonding of paint and other coatings
VOC Compliant
Also available in 5 gallon buckets
Description
Looking for a green product to make your construction project maintenance a little easier? Look no further than A+ Form Release Agent. A+ is a unique and powerful form release agent designed specifically for the concrete industry. At Concrete Chemicals, we use only the highest-quality ingredients, resulting in a superior product with exceptional release properties. A+ is safe to use on previously treated forms. Use on metal, wood, plastic or fiberglass. This product is durable and will not wash off with rain. It also dramatically reduces cleanup time. It dries quickly and doesn't interfere with previous bonding or paint coatings. If concrete accidentally gets on anything that has been coated with our A+ Form Release Agent, it can easily be rinsed away. Start coating your tools and equipment today for simple concrete removal! *Oil-Based For bulk orders check us out at Concretechemicals.com2. CRC Food Grade Mold Release, 11.5 oz Aerosol Can, Clear
Feature
Silicone free formula is perfect for medical and food packaging aplicationsThe pure white oil based formula makes it an excellent all-purpose mold release
Fast drying and paintable
Non-flammable
Safe for use on most plastics
Meets FDA regulation 21 CFR 172.878
Description
CRC food grade mold release WO is a non-silicone, paintable mold release that is specially formulated for use in the molding of packaging and plastics used in medical and food industries. This highly refined white mineral oil based formula is colorless, odorless, non-staining and non-corrosive. CRC food grade mold release WO is a solvent-free formula that provides maximum plastic compatibility. Food grade formula makes this a perfect release agent for medical and food packaging applications non-silicone, paintable fast drying for quick cycles colorless, odorless, non-staining, non-corrosive. Excellent all-purpose release meets FDA regulation 21 CFR 172.878 (white mineral oil). Applications includes use with all thermoplastic resins, polyolefins, polycarbonates, rubber and some epoxies. Ideal for medical and food applications.3. Stoner E-236 Urethan Mold Release 1 - 12 oz can
Feature
1 - 12 oz aerosol canSaves time - lets urethane parts release quickly and easily from molds
Formulated to provide high levels of user and environmental safety
Contains no Class I or Class II Ozone Depleting Substances
Colorless and non-staining
Description
(No International Orders Until Further Notice) Stoner E-236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results. E236 provides fast, easy part removal from molds and multiple part releases per application. Improves molding efficiency in many processes including injection, compression, transfer, vacuum form, pour cast, die cast, and extrusion molding. BENEFITS: Saves time - lets urethane parts release quickly and easily from molds. Improves part appearance and reduces defects caused by sticking. Formulated to provide high levels of user and environmental safety. Contains no Class I or Class II Ozone Depleting Substances. Contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants. Contains no chlorinated solvents such as 1,1,1 trichloroethane or methylene chloride. Colorless and non-staining.4. Mann Release Technologies Ease Release 200 14 fl. oz.
Feature
Mann Ease Release 200 Aerosol Clear Mold Release SprayWill release polyurethane elastomers, epoxy resin, polyester resins, RTV silicones, rubber, and thermoplastic polymers
Excellent release. Effective on urethane, silicone and metal molds.
Easy to Apply. Fast Drying.
Effective over a broad temperature range from 70F to 500F
Description
Ease Release 200 is an excellent general purpose release agent for making molds and casting parts. This product will release polyurethane elastomers, polyurethane foam, epoxy resin, polyester resins, platinum silicones, rubber and thermoplastic polymers. Ease release 200 is effective on aluminum, chrome, platinum silicone, epoxy, rubber and steel molds.Ease Release 200 is easy to apply, fast drying and effective over a broad temperature range from 70F to 500F.5. Frankford Arsenal Bullet Mold Release Agent
Feature
Easy to ApplyFast-Drying
Long Lasting
Description
Frankford Arsenal Drop Out Bullet Mold Release Agent and Lube is great for preparing your molds for casting the modern way. This product works as both a release agent and a lube. The special formula contains graphite to help bullets drop easily from the mold and also works to prevent rust.6. Smooth-On Universal Mold Release 14 fl. oz.
Feature
14 fl oz. spray canUniversal mold release is formulated especially for mold making and casting
Description
Universal mold release is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It releases casting materials from properly prepared rubber, plastic, and metal molds. Lengthens production life of rubber molds. 14 fl. Oz. (Net weight 12 oz. /341 grams.7. CRC 03300 Silicone Mold Release Spray, (Net Fill Weight 12 oz) 16oz Aerosol can.
Feature
Used for a variety of applications including injection molding, compression molding, blow molding, and extrudingMultiple part releases per application
Ideal for hot or cold molds
Medium duty silicone content of 3.5 percent
Non-staining, non-corrosive and fast drying
Effective temperature range 35F to 600F
Description
CRC General Purpose Silicone Mold Release is suitable for most applications where post-mold painting is not required. This product has a medium duty silicone content (3-1/2 percent) and is a rapid dry, anti-stick mold release agent suitable for cold and hot molds. CRC General Purpose Silicone Mold Release prevents sticking, which increases the life of dies and molds, improves product surface finishes and reduces production times. Excellent for use in injection and compression molding of ABS, acetal, acrylic, epoxy resins, HDPE, Noryl, nylon, Polyproplyene, polysulfone, and wax. Also for use in blow molding, extruders, foundries and investment castings. Prevents Sticking to increase the life of dies and molds, improve product surface finishes and reduce production times. Rapid Dry, anti-stick mold release agent suitable for cold and hot molds. Effective Temperature Range of 35 to 600 degrees F. 3-1/2 percent Solids provide excellent general-purpose lubrication. Low Odor, non-staining and non-corrosive. Meets FDA Regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food contact). Meets 1998 USDA Guidelines for use in meat and poultry plants.8. Fiberglass Evercoat Mold Release Agent, 8-Ounce
Feature
Evercoat105685
Auto & Boating
Description
Since 1953, Evercoat has made a promise to bring only the highest quality products to the marine industry. These high quality products to the marine industry. These high quality products make the maintenance and repair of your boat better and easier than ever before. Polyvinyl Alcohol (PVA) is for use as a curing agent for Gel-Kote and other air inhibited polyester resins. Spray a light mist over the catalyzed Gel-Kote to fully cure the Gel-Kote resin and eliminate the tacky feel. Also an excellent mold release agent.9. Environmental Technology 33900 Mold Release and Conditioner, 4 Ounce
Feature
Solvent FreeOdorless
Convenient pump spray
Use with easycast casting epoxy and castin' craft casting resin
Extends the life of your molds
Description
Castin' Craft Mold Release/Conditioner is used to release molds when casting with Castin' Craft Polyester Casting Resin or EasyCast Clear Casting Epoxy. We recommend Mold Release/Conditioner as a release agent and to clean, condition and extend the life of your molds.10. CRC Heavy Duty Silicone Mold Release, 12 oz Aerosol Can, Clear
Feature
Efficient, economical and effective for faster moldingColorless, odorless, non-staining and non-corrosive
Helps avoid mold build-up
Effective temperature range up to 600 degrees F
Heavy duty silicone content of 5 percent
Meets FDA Regulation 21 CFR 175.300 (release agent)
Description
CRC heavy duty silicone mold release provides superior lubrication and allows the user to maximize their releases even in severe molding conditions. This product has a heavy-duty silicone content (5 percent) and is a rapid dry, anti-stick mold release agent suitable for cold and hot molds. CRC heavy duty silicone mold release prevents sticking, which increases the life of dies and molds, improves product surface finishes, and reduces production times. Excellent for use in injection and compression molding of ABS, acetal, acrylic, Noryl, nylon, polycarbonate, polystyrene, polysulfone, rubber and wax. Also for use in blow molding, extruders, foundries and investment castings. Prevents sticking to increase the life of dies and molds, improve product surface finishes and reduce production times. Rapid dry, anti-stick mold release agent suitable for cold and hot molds. High quality Silicone yields more cycles per can - provides maximum efficiency and economy for faster molding, fewer rejects and more production. Effective temperature range up to 600 degrees F. 5 percent Solids provide superior lubrication even in severe molding conditions. Colorless, odorless, non-staining and non-corrosive. Meets FDA Regulation 21 CFR 175.300 (release agent) and 21 CFR 178.3570 (lubricant, incidental food contact). Meets 1998 USDA Guidelines for use in meat and poultry plants. Less than -50 degrees F freezing point.11. CRC Lecithin Mold Release, 12 oz Aerosol Can, Clear
Feature
No special cleaning before part decorationColorless, odorless, non-staining and non-corrosive
Meets FDA regulation 21 CFR 175.300 (release agent)
Long lasting mold release for fast, easy part removal
Provides smooth, dry, non-toxic film
Non-silicone, vegetable-based
Description
CRC Lecithin Mold Release is suitable for most applications where post-mold parts will be painted, stenciled, glued, bonded, laminated, hot-stamped or metalized. This product is a food-approved, vegetable based, non-silicone mold release. The rapid dry, anti-stick formula is suitable for cold and hot molds. CRC Lecithin Mold Release prevents sticking, which increases the life of dies and molds, improves product surface finishes and reduces production times. Excellent for use in injection and compression molding of ABS, acetal, acrylic, nylon, polycarbonate, polyethylene, polypropylene, polystyrene, polysulfone, and rubber. Also for use on plastic wrap equipment, gaskets and seals. Prevents sticking to increase the life of dies and molds, improve product surface finishes and reduce production times. Rapid dry, anti-stick mold release agent suitable for cold and hot molds. Vegetable-based Lecithin is a non-silicone, food approved release. Completely Compatible with secondary operations where parts must be painted, stenciled, glued, bonded, laminated, hot stamped or metalized. (No special cleaning required before part decoration.) 3-1/2 percent Solids provide excellent general purpose lubrication up to 500 degrees F. Colorless, Odorless, non-staining and non-corrosive. Meets FDA Regulation 21 CFR 175.300 (release agent). Meets 1998 USDA Guidelines for use in meat and poultry plants.12. 2 PACK Mann Ease Release 200 14 fl. oz - Mold Release for Silicones, Epoxy resin, Rubber, Polyester Resins, Polyurethane elastomers
Feature
2 Pack of Mann Ease Release 200 - Includes 2 cans of 14 oz Mann Ease Release 200Mann Ease Release 200 Aerosol Clear Mold Release Spray
Will release polyurethane elastomers, epoxy resin, polyester resins, RTV silicones, rubber, and thermoplastic polymers
Excellent release. Effective on urethane, silicone and metal molds. Easy to apply, fast drying.
Effective over a broad temperature range from 70F to 500F
Description
Mann Ease Release 200 is an excellent general purpose release agent for making molds and casting parts. This product will release polyurethane elastomers, polyurethane foam, epoxy resin, polyester resins, platinum silicones, rubber and thermoplastic polymers. Ease release 200 is effective on aluminum, chrome, platinum silicone, epoxy, rubber and steel molds.Ease Release 200 is easy to apply, fast drying and effective over a broad temperature range from 70F to 500F.13. Polytek Pol-Ease2500 Release Agent (12oz. Can)
Feature
Can be washed off models and castings if they need to be paintedFor Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers).
Apply to silicone rubber molds when casting liquid silicone rubber
To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life)
Apply to polyurethane molds before casting polyurethane liquid plastics