When you want to find betafpv 75 battery, you may need to consider between many choices. Finding the best betafpv 75 battery is not an easy task. In this post, we create a very short list about top 17 the best betafpv 75 battery for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 17 betafpv 75 battery:
Reviews
1. BETAFPV 75mm Beta75 Tiny Whoop Frame with 4pcs 3-blades Props
Feature
All in one 75mm Tiny Whoop airframe Kits, more punch on throttle with 7x20mm motors and 3-blade 40mm propellers.This frame is upgraded durably based on the original stock Blade Inductrix frame
The 75mm airframe is almost a scale clone to the original stock Blade Inductrix frame. The fc's mounting columns are fully compatible with all the Tiny Whoop flight controller.
3-blades props work terrific and cost a lot less than the original 4-blades props
This airframe kits include almost all the parts to DIY your own 75mm Tiny Whoop except the electronic parts.
Description
Descprition:This airframe kits include almost all the parts to DIY your own 75mm Tiny Whoop except the electronic parts.
The 75mm airframe is almost a scale clone to the original stock Blade Inductrix frame. The fc's mounting columns are fully compatible with all the Tiny Whoop flight controller.
All in one 75mm Tiny Whoop airframe Kits for DIY
This frame is upgraded durably based on the original stock Blade Inductrix frame
3-blades props work terrific and cost a lot less than the original 4-blades props
Package
1 * 75mm Tiny Whoop clear plastic frame
4 * 40mm blue 3-blades prop ( 2CW + 2CCW )
1 * Foam Battery Compartment Adaptors
2. BETAFPV 4 Sets 3-blade 40mm Props for Quadcopter Beta75 BNF Tiny Whoop
Feature
16 pcs of BETAFPV 3-blade 40mm Props Tiny WhoopRandom Color:Red, Pink, Yellow, Blue,White
Smaller inertia and more power violent
Only 0.4g and lighter enough
These props only fit for BETAFPV 75mm airframe, NOT used for 65mm Tiny Whoop airframe
Description
These props are designed for BETAFPV 75mm airframe. The shaft is 1.0mm and fit for 7x20mm coreless brushed motors well.Specification:
Product material: Plastic
Diameter: 40mm
Inner diameter: 1.0mm Shaft
Weight: 0.4g/piece
Random Color:Red, Pink, Yellow, Blue
Package:
8 * CW 3-blade 40mm props
8 * CCW 3-blade 40mm props
Random 4 colors
3. 12V 75Ah SLA Battery for Wayne ESP25 Back-Up Pump - Mighty Max Battery brand product
Feature
ML75-12 SLA is a 12V 75AH group 24 Sealed Lead Acid (SLA) rechargeable maintenance free battery.Dimensions: 10.24 inches x 6.61 inches x 8.27 inches. Listing is for the Battery and Screws only. No wire harness or mounting accessories included.
Factory activated SLA / AGM battery. Maintenance free. No adding water. Advanced design works right out of the box and requires zero maintenance, zero adding of fluids compared to a flooded wet cell battery
Rechargeable spill proof battery has a characteristic of high discharge rate, wide operating temperatures, long service life and deep discharge recover. Mounted in any position, resists shocks, and vibration. High performance in high and low temperatures.
Backed by a 30 day refund policy and full 1 year warranty.
Description
Delivering power when you need it, the Mighty Max ML75-12 12 Volt 75 AH uses a state of the art, heavy-duty, calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications.The ML75-12 is an Absorbent Glass Mat (AGM) technology with a valve regulated design, that can be used in enclosed and indoor environments without leaking or maintenance, providing a superior performance for thousands of models.
Mighty Max SLA batteries are utilized in a wide variety of applications including; Consumer Electronics, Electric Vehicles, Engine Starters, Golf Carts, Hunting, Lawn and Garden Tools, Medical Mobility, Motorcycles, Power sports, Portable Tools, Solar, Toys and Hobby, Access Control Devices, Emergency Lighting, Security and more.
Specifications:
Voltage: 12 Volt
Amperage: 75 AH
Chemistry: SLA, AGM
Battery Dimensions:
10.24 in x 6.61 in x 8.27 in
Weight: 50.71 Lbs
Warranty
1 Year
Genuine Mighty Max battery Product
4. LubriMatic Green 75-030 Battery Filler (2 Quart Professional with Automatic Shut Off)
Feature
Shuts off automatically when battery cell is at proper level, no over fillingFeatures the double action fast flow valve tip that prevents after-drip
Stops surface discharge caused by wet battery
Tough, polyethylene
LubriMatic Professional Battery Filler offers convenience and the safety features you need
Shuts off automatically when battery cell is at proper level, no danger of over filling
Features a double action fast flow valve tip that prevents after-drip
Stops surface discharge caused by a wet battery
Tough, polyethylene construction; safe to use with battery acid; 2 quart capacity
Description
For more than 40 years, Plews-LubriMatic has been developing and distributing superior lubrication products. Part of the Plews & Edelmann family of products, Plews-LubriMatic serves the industrial, hardware, marine, automotive and agricultural markets, as well as many industries requiring professional grade lubricants and penetrants.5. BETAFPV 1s Lipo LiHV Charger Board with XT60 12A 3V Battery Charger Adapter
Feature
BETAFPV 1s Lipo LiHV Charger Board with XT60 12A 3V Battery Charger AdapterCharge 1S Lipo batteries (4.2V) and HV Lipo batteries (4.35V) at once in the same board by a selectable switch.
XT60 Input (3s or 4s) for field charging. Could charge up to 6 pcs batteries with Picoblade 1.25 or JST PH2.0 power plug at once. Individual charging per ports, not parallel.
Turns itself off when supply battery reaches safe low-voltage. 2 channels BEC for supply current. 400mAh current per charge port
LED lights indicate when each battery is done charging
Description
This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn red until the battery is fully charged. Once charged, the LED will turn green and you can remove your 1s battery and fly!Specification:
Weight: 36g
Dimensions: 75x42x17mm
Input: 3s - 4s Selectable
Cutoff Voltage: 10.8v (3s), 14.4v (4s)
Output: Fixed at approx 400 milliamps
4.20v cell charging cutoff for Lipo battery (+- 0.5% margin of error)
4.35v cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Optional AC Wall Adapter
Note: Ports are numbered 1-6. Do not put more than one battery on a single port. For example: do not insert one battery on the Picoblade 1.25 plug and another on the same port with the PH 2.0 plug.
Package:
1 * BetaPower 1s Lipo LiHV Charger Board by BETAFPV
1 * XT60 12A 3V Battery Charger Adapter
6. Optima Batteries 8022-091 75/25 RedTop Starting Battery
Feature
12-Volt, 720 Cold Cranking Amps, Size: 10 5/16" x 6 13/16" x 7 5/8" tall, Weight: 33.1 pounds, Dual SAE & GM PostsReserve capacity of 90 minutes for constant performance
Optimal starting power even in bad weather
Fifteen times more resistant to vibration for durability
This item is not for sale in Catalina Island
Description
Optima 75/25 RedTop is designed to deliver high power cranking ability even in harsh weather conditions. This battery is great for heavy use by hot rods and off-roaders with its leak-proof, high power, and starting ability. The unique SpiralCell design provides a strong and clean power source, ensuring the safety of you, your family and the environment. The higher reserve capacity gives you a longer shelf-life to give you the power when you need it, where you need it.7. BETAFPV 8pcs 230mAh HV Lipo Battery JST 2.0 25C 4.35V with PowerWhoop Connector for Tiny Whoop
Feature
Tiny Whoop Blade inductrix great choice of battery with The connector plug is Micro JST 2.0 PowerWhoop connnectorChemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation
Capacity: Standard voltage (4.2v, 230mAh) or High voltage (4.35v, 250 mAh)
Dimension: 54mm * 12.5mm * 6.0mm, Weight: 6.3g/per unit
8pcs 230mAh HV Lipo Battery JST 2.0 25C 4.35V with Power Whoop Connector for Tiny Whoop
Description
This battery is lighter than the usual 230mah battery, and can be charged to either standard voltage (4.2v, 230mah) or high voltage (4.35v, 250 mah).This battery will give you higher rpms (more power) and a considerably longer flight time.PowerWhoop connector means that you will experience more power and longer flight times from the same size battery!
The battery connector is Micro JST 2.0,NOT work with stock Blade Inductrix, Blade Nano QX, Nano CPX, Blade mCX etc.
Specification:
Item: HV 1S Lipo Battery
Rate: 25C
Dimension: 54mm * 12.5mm * 6.0mm
Weight: 6.3g/per unit
Capacity: 230mAh in standardvoltage, 250mAh in high voltage
The connector plug: Micro JST 2.0, AKA Powerwhoop connector
Package:
8 * 230mAh HV 1S Lipo Battery 25C with PowerWhoop Connector
8. BETAFPV 75mm Tiny Whoop Frame Kits with 3-blades Props 7x20mm 17500KV Motors
Feature
All in one 75mm Tiny Whoop airframe Kits for DIYThis frame is upgraded durably based on the original stock Blade Inductrix frame
3-blades props work terrific and cost a lot less than the original 4-blades props
7x20mm 17500KV motors can bring flying experience more violence
BETAFPV 75mm Tiny Whoop Frame Kits with 3-blades Props 7x20mm 17500KV Motors
Description
Descprition:This airframe kits include almost all the parts to DIY your own 75mm Tiny Whoop except the electronic parts.
The 75mm airframe is almost a scale clone to the original stock Blade Inductrix frame. The fc's mounting columns are fully compatible with all the Tiny Whoop flight controller.
The motor mounts are suitable for 7x20mm coreless motors.
Package:
1 * 75mm Tiny Whoop clear plastic frame
1 * Blue plastic canopy
4 * 7x20mm coreless motor ( 2CW + 2CCW )
4 * 40mm blue 3-blades prop ( 2CW + 2CCW )
9. BETAFPV 8pcs 260mAh HV 1S Lipo Battery 30C 4.35V with JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Blade Inductrix
Feature
Tiny Whoop Blade inductrix great choice of battery with the connector plug of JST-PH2.0 PowerWhoop connnectorCapacity: 260mAh 30C 4.35V
Weight is approx 6.90g per unit, 0.6g heavier than the 230mAh battery
Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation
Chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation
Description
The battery connector is Micro JST 2.0,NOT work with stock Blade Inductrix, Blade Nano QX, Nano CPX, Blade mCX etc.PowerWhoop connector means that you will experience more power and longer flight times from the same size battery!
Specification:
Item: 260mAh HV 1S Lipo Battery
Rate: 30C
Dimension: 6mm * 12mm * 52mm
Weight: 6.90g/per unit
Capacity: 260mAh 30C 4.35V
The connector plug: Micro JST 2.0, AKA Powerwhoop connector
Package:
8 * 260mAh HV 1S Lipo Battery 30C 4.35V with JST-PH 2.0 Powerwhoop Connector
10. BETAFPV 2pcs 450mAh 2S 80C Lipo Battery with JST 2.0 and XT30 Plug for Doinker Moskito Mico FPV Racing Drone Quadcopter
Feature
Just for micro FPV racing drone like Doinker or Moskito etcSize: 60x18.5x13.5 mm
With Red JST 2.0 and XT30 plug
Rate: 80C/160C
Description
Specification:Weight: 26g
Size: 18.5x13.5x60mm
Connector: Red JST 2.0 and XT30 with 18AWG silicone wire
Pack: 2S 7.4V
Rate: 80C/160C
Package:
2 * BETAFPV 450mAh 2S 7.4V 80C Lipo Battery Pack
11. STANLEY BC25BS 25 Amp Bench Battery Charger with 75 Amp Engine Start and Alternator Check
Feature
25 amp bench battery charger maintains and charges any AGM, GEL, or WET automotive or marine 12V batteryFully automatic high frequency charging delivers 3 stage charging, automatically switching from fast charge, to top-off, to trickle charge
Battery reconditioning feature helps extend battery life; 75 amp engine start helps start your vehicle in about 90 seconds
Equipped with reverse polarity protection; LCD screen displays charging status and battery status with easy to understand icons
Features a patented alternator check which indicates if the alternator is maintaining battery level; ETL Certified for performance and safety
Description
Get back on the road in minutes with the STANLEY BC25BS 25 amp bench battery charger with 75 amp engine start. Vehicle won't start? Battery needs maintenance? Just connect the battery charger clamps to the battery terminal and press charge. The bench battery charger automatically does the rest for optimum performance. Fully automatic high frequency charging delivers 3 stage charging, automatically switching from fast charge, to top-off, to trickle charge. This bench battery charger is ideal for motorhomes, boats, jet skis, lawn tractors, ATVs, snowmobiles, and vehicles that sit idle for months at a time. Charge and maintain any AGM, GEL, or WET automotive or marine 12V battery. It's equipped with a digital LCD screen that displays charging status and battery status with easy to understand icons. It also features a patented alternator check to evaluate the battery voltage under load to indicate if the alternator is maintaining battery level. This battery charger eliminates the need to manually input settings like battery type and size, and charges up to 40 percent faster than other conventional chargers. Need to get back on the road quickly? The STANLEY BC25BS bench battery charger also features a 75 amp engine start, which helps start your vehicle in about 90 seconds. The built-in cord, cable wrap, and clamp storage make this battery charger easy to use and store. California Energy Commission (CEC) compliant and ETL Certified for performance and safety.12. BETAFPV Beta75 BNF Tiny Whoop Quadcopter Native Frsky receiver Integrate with OSD
Feature
Please note: send without a usb charger.Firmware version: Betaflight BETAFLIGHTF3 . Beta75 bulit with Insane integrate with OSD : https://www.youtube.com/watch?v=IfdogjN80UE&feature=youtu.be
The same hole pattern with Tiny Whoop flight controller.More punch on throttle with 7x20mm motors and 3-blade 40mm propellers.
Built in Frsky rx is compatible with Taranis, Taranis Plus, X9E etc. This built in receiver integrate a power amplifier IC (PA) RFX2401C, so you could get up to long range. This is the biggest improvement than other board with no PA included.
The struts between the motor mounts and ducts are fragile and break easily. So these upgraded frames stiffen the struts considerably. The struts have a flat cross section which creates more bonding area with the duct.
Description
BETAFPV Beta75 BNF Tiny Whoop Quadcopter Native Frsky receiver Integrate with OSDDescription:The Beta75 is only about 1cm larger than the Tiny Whoop Quad. The biggest difference is the propulsion system. With 7x20mm motors and tri-blade 40mm props, it feels very fast, perfect for indoor racing and acro flying. The performance in outdoor is also great, handles the light breezes very well where the Tiny Whoop tend to struggle to stay level.
It has a motor to motor distance of 75mm ( 65mm for Tiny Whoop ). The width and length of the quad measure at 105mm. Compared to other micro quads with brushless motors, the price of Beta75 is really attractive, perfect for beginners and FPV racers alike.
Specification:
Wheelbase: 75mm
Weight: 32g (without battery)
Flight Controller: BETAFPV F3 EVO Brushed FC with Native Frsky receiver
Firmware version: Betaflight BETAFLIGHTF3
Motor: 7x20mm Coreless Brush Motor, 17500KV
Receiver: Frsky D8 potocol with PA
Camera and 5.8G VTX: AIO 520TVL 1/4 Inch Camera 25mW 40CH
Battery: 4.35V 230mAh Lipo battery with PowerWhoop connector
Flight time: 3 min 30 second
Package:
1 * BNF Beta75 Micro FPV Quad ( Frsky Rx No Battery)
13. BETAFPV 2pc 550mah 1S Battery 3.8V 25C JST2.0 for Tiny Drone like Inductrix FPV Plus RTF
Feature
Connector is Inductrix FPV Plus RTFSize: 64*16*7mm
Rate: 50C/100C
Don't over-charge, or over-discharge batteries.
Description
2pc 550mah 1S Battery 3.8V 25C JST2.0 for Tiny Drone like Inductrix FPV Plus RTFSpecification:
Capacity: 550mAh
Size: 64*16*7mm
Continuous Discharge Rate: 50C/100C
Weight: 14g
Note: Due to the difference between the measurement, the battery dimension and weight may have little error.
Caution:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
Package Including:
2 * 550mAh 1S Lipo Battery
14. Beta75 BNF Micro Whoop Quadcopter DSMX Receiver with OSD
Feature
Beta75 BNF Tiny Whoop Quadcopter DSMX Version with OSD has the same hole pattern with Tiny Whoop flight controllerMore punch on throttle with 7x20mm motors and 3-blade 40mm propellers.
The DSMX version support DSM2 and DSMX protocol both. Compatible with all of the DSM2 or DSMX model aircraft models remote control, such as JR, SPEKTRUM Horizon remote control.
Manual about binding with Spektrum radio: https://betafpv.freshdesk.com/support/solutions/articles/27000033588-how-to-bind-the-radio-transmitter
No need to bind every time when the battery is replaced, DSMX Rx could remember your transmitter
Description
Beta75 BNF Micro Whoop Quadcopter DSMX Receiver with OSDManual about binding with Spektrum radio: https://betafpv.freshdesk.com/support/solutions/articles/27000033588-how-to-bind-the-radio-transmitter
Description:
The Beta75 is only about 1cm larger than the Tiny Whoop Quad. The biggest difference is the propulsion system. With 7x20mm motors and tri-blade 40mm props, it feels very fast, perfect for indoor racing and acro flying. The performance in outdoor is also great, handles the light breezes very well where the Tiny Whoop tend to struggle to stay level.
It has a motor to motor distance of 75mm ( 65mm for Tiny Whoop ). The width and length of the quad measure at 105mm. Compared to other micro quads with brushless motors, the price of Beta75 is really attractive, perfect for beginners and FPV racers alike.
Specification:
Wheelbase: 75mm
Weight: 32g (without battery)
Flight Controller: BETAFPV F3 EVO Brushed FC with DSMX receiver
Firmware Version: Betaflight SPRACINGF3EVO 3.1.6
Motor: 7x20mm Coreless Brush Motor, 17500KV
Receiver: Frsky D8 potocol with PA
Camera and 5.8G Tx: AIO 520TVL 1/4 Inch Camera 25mW 40CH
Batterry: 3.7V 230mAh Lipo battery with PowerWhoop connector
Flight time: 3 min 30 second
Package:
1 * BNF Beta75 Micro FPV Quad ( DSMX Rx )
1 * BETAFPV 230mah 1S Lipo Battery
15. BETAFPV Beta75S BNF Tiny Whoop Quadcopter Frsky Receiver with OSD for 8X20 Motor
Feature
Great alternative to popular Tiny Whoop quadcopter.More punch on throttle with 8x20mm motors and 3-blade 40mm propellers.
The same hole pattern with Tiny Whoop flight controller.
The Beta75S has 2 improvement based on Beta75 drones: 1.Motors: 7x20mm -> 8x20mm brushed motors. 2.Battery: 260mAh -> 550mAh Lipo HV battery
Description
SpecificationWheelbase: 75mm
Weight: 32g (without battery)
Flight Controller: BETAFPV Brushed FC with OSD
Firmware Version: Betaflight BETAFLIGHTF3 3.2.0
Motor: 8x20mm coreless brushed motor, 14000KV
Receiver: Frsky D8 potocol
Camera and 5.8G Tx: AIO 520TVL 1/4 Inch Camera 25mW 40CH
Batterry: 550mAh Lipo HV battery with PowerWhoop connector
Flight time: 5 min
ASSEMBLY PARTS LIST
Frame: Beta75S frame
Motors: 8x20mm brushed motors
Props: 40mm 3-blades props
FC: BETAFPV F3 FC with OSD (According to different Rx version)
AIO camera: Z01 Camera
Battery: 550mAh LiHV battery
FRSKY RX VERSION
The Frsky version support D8 protocol only. Compatible with Frsky Taranis X9D/ X9D Plus etc. So it is incompatible with Frsky Taranis radio transmitter in EU firmware.
Find out which firmware you have on your radio.
So if you have a Frsky radio transmitter in EU firmware and want to try the OSD function, we would recommend the no receiver version. You could add an external micro receiver that support the D16 protocol, like Frsky XM etc.
Package Including
1 * BNF Beta75S Micro FPV Quad
1 * BETAFPV 550mAh 1S Lipo HV Battery
16. 2pcs Beta75 Pro Micro Brushless Whoop Frame
Feature
2pcs Beta75 Pro Micro Brushless Whoop FrameWeight:5.3g
Propellers: 40mm 4-blade props
Motors: 0703 brushless motors
Batteries: 550mAh 1S Lipo HV batteries
Description
2pcs Beta75 Pro Micro Brushless Whoop FrameSpecification:
Item: Beta75 Pro Micro Brushless Whoop Frame
Weight:5.3g
RECOMMENDED PARTS
Propellers: 40mm 4-blade props
Motors: 0703 brushless motors
Batteries: 550mAh 1S Lipo HV batteries
Package including:
2 * 75mm Micro Brushless Whoop frame
17. 2pcs Beta75s 75mm Micro Whoop Frame for 8x20mm Motors
Feature
The strut design is very different and actually creates a complete X all they way back to the battery chamber.Weight: 7.4g
Motors recommended: 8x20mm 14000KV motors (Not includding)
Props: recommended: 40mm 3-blades props / 40mm 4-blades props (Not includding)
Description
2pcs Beta75s 75mm Micro Whoop Frame for 8x20mm MotorsThe strut design is very different and actually creates a complete X all they way back to the battery chamber. The struts between the motor mounts and ducts are fragile and break easily. So these upgraded frames stiffen the struts considerably. The struts themselves have a flat cross section which creates more bonding area with the duct.
Specification:
ItemBeta75s 75mm Micro Whoop Frame
Weight7.4g
RECOMMENDED PARTS LIST
Frame: Beta75S frame (just this one)
Motors: 8x20mm 14000KV motors (Not includding)
Props: recommended: 40mm 3-blades props / 40mm 4-blades props (Not includding)
Package including:
2 * 75mm Whoop clear plastic frame (Fit 8x20 motors)
