If you looking for brushless esc 30a then you are right place. We are searching for the best brushless esc 30a on the market and analyze these products to provide you the best choice.
Reviews
1. Makerfire 4pcs BLHeli_S 30A ESC OPTO Electronic Speed Controller 3-6S Brushless for FPV Multicopter Quadcopter
Feature
Chips on EFM8BB21.BLHeli_S is designed for superior performance in multirotors, and uses hardware Works with 3S to 4S input - Rated at 30A continuous and 35A burs
Small size combined with light weight for easy installation.
Support Damped mode, Oneshot125, Oneshot42 and Multshot
Description
Features:-Chips on EFM8BB21.-BLHeli_Sis designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.-Small size combined with light weightfor easy installation.- The code supports regular 1-2ms pulse width input, as well asOneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us).- The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work-excellently in normal operating environmentsModelBLS-30A
Input Voltage3-6S
Con.Current30A
BEC:NO
FirmwareBLheli_S
Specifications
Battery: 3-6s
-Constant Current: 30A
-Burst Current: 40A-10S
-Size: 29x15x5mm
-Firmware: Blheli_S
-MCU: EFM8BB21
-Bootloader: Yes
-Weight (with wire) 7.6g
--------------------------------------------------------
Package Including:
4 * Makerfire BLHeli_S 30A ESC OPTO Electronic Speed Controller 3-6S Brushless for FPV Multicopter Quadcopter
2. Makerfire 4pcs BLHeli-32 32Bit 30A ESC Brushless ESC Dshot1200 Electronic Speed Controller 2-4S for FPV Multicopter Quadcopter
Feature
The 32bit archetecture enables the ESC to run at incredible speeds resulting in better performance, faster input signals and lower latency compared to older 8bit ESCsSmall size combined with light weight for easy installation. The suggestion software of updating program: BLHeliSuite
Uses 12 low ESR capacitor power filter circui for a smaller ripple, effectively reduce the interference of the equipment and improve the stability of the system
Supports DSHOT 1200, Oneshot125 (125-250us), Oneshot42(41.7-83.3us) and Multishot (5-25us)
All N-FET design with external oscillator for steady performance across different thermal and voltage conditions.
Description
What can the increased MCU speed do?First of all, it can run input signals with lower latency at faster rates. DSHOT up to at least DSHOT1200, and at rates up to at least 32kHz is now supported.Secondly it allows packing of more functionality. 1. Programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.2. Auto timing. Which is not the option to choose if you're after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.3. Programmable brake on stop force. Which allows control of the braking of fixed wing props.4. Improved direction change in bidirectional mode.5. More to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.Specification:
MCU: STM32F051
Program: BLHELI32 Bit
Size: 12.8 * 25.8 * 5 mm
Weight: 5.9g;
Input Voltage: 2-4 Cell LiPo
Constinuous Current: 30A
MOSFET: Toshiba N Channel
Independent Semi-bridge Drive Chip
PCB: 30Z copper thickness, gold-plated
--------------------------------------------------------
Package Including:
4 * Makerfire BLHeli-32 32Bit 30A ESC
3. FPVDrone 30A ESC RC Motor Brushless Speed Controller for 450 Multicopter Helicopter Airplane(4PCS)
Feature
No need to solder,more convenient,30A: an instant 45 A, 40A continuous 10 seconds,BEC output: 30A, stressed: 5 V 3A. 2LIPO 4-5 micro-steering gear 3 LIPO 3-4 micro-steering gear,all the ESCs were completely cool no issues,they do not get overly hot and hold up great.Compatible with: 400-450 helicopters / Aircraft or Quad-Rotor Multi RC Helicopter, good for quad-rotor KK multi-copter
The use of BEC, MCU separate power supply,and the use of speed control curve, automatically adapt to the accelerator, more suitable for remote control devices.
Protection, without Signal one second after the shutdown,security started, throttle position does not prohibit started temperature protection, the surface temperature of 110 degrees downtime; out of control.
Automatic selection 2-3 LIPO were protected voltage is 6 V/9V; automatically elected NIMH, each protected voltage is 0.8 V.
Description
XXD 30A Brushless Speed Controller ESC For QuadCopter Xcopter Multicopterdescription
100% Brand New
Feature
30A: an instant 45 A, 40A continuous 10 seconds
Size: 30A-45 X 24 X 8mm
voltage range: 4 V-16V
battery number :4-12 NIMH 2-3LIPO (4LIPO BEC does not allow the use of output)
BEC output: 30A, stressed: 5 V 3A. 2LIPO 4-5 micro-steering gear 3 LIPO 3-4 micro-steering gear /
Protection features: automatic selection 2-3 LIPO were protected voltage is 6 V/9V;
automatically elected NIMH, each protected voltage is 0.8 V;
security started, throttle position does not prohibit started temperature protection, the surface temperature of 110 degrees downtime; out of control
protection, without Signal one second after the shutdown.
Property Description: speed limit, within a 2 to as high as 300,000 to 12 to 50,000, to a very, very foreign to the 14 to 42,000. 8KHz PWM control,
the use of speed control curve. Automatically adapt to the accelerator, more suitable for remote control devices.
The use of BEC, MCU separate power supply, a more stable work.
Notice: this 30A can not be programmed , becuse we have programed it when producing .
