Top Rated Products

We spent many hours on research to finding extruders 3d printer, reading product features, product specifications for this guide. For those of you who wish to the best extruders 3d printer, you should not miss this article. extruders 3d printer coming in a variety of types but also different price range. The following is the top 4 extruders 3d printer by our suggestions:

Product	Features	Editor's score	Go to site
	Hot End for 3D Printer Assembled Extruder DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length)		Go to amazon.com
	RepRap Champion 3D Printer MK7 MK8 Filament Extruder Feeder Kit for 1.75mm /w Driver Gear (Right Hand Version) for FlashForge Creator, Prusa i3 or other RepRap		Go to amazon.com
	RepRap Champion All Metal Upgrade Kit Direct Drive Extruder DIY for RepRap 3D printer Prusa i3. Right version.		Go to amazon.com
	3D Printer Accessories V6 J-Head Hotend RepRap Extruder for 1.75mm Filament, Direct Feed or Bowden. w/ 0.4mm Nozzle, 12V fan, and 3ft PTFE Bowden Tube		Go to amazon.com

Related posts:

Reviews

1. Hot End for 3D Printer Assembled Extruder DIY Hotend 1.75mm Filament 0.4mm Nozzle 12V 40W Heater Including 10PCS Extra Nozzles and Tubes(30mm Length)

Feature

Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament, including 0.4mm(7pcs), 0.2mm(1pc), 0.3mm(1pc) and 0.5mm(1pc).
12V/40W high temperature resistance heater catridge(wire length 1M/39.4inches), operating temperature range:0~+280C (0~+538F)
Aluminium heater block 20*20*10mm, comes with a necessary screw. Working perfectly with everyday filaments like PLA and ABS. Note: heat block inner hole for set screw: M6 and M3.
30mm Length Extruder 1.75mm Tube, made from Aluminum. Reduces extrusion force and improve reliability of retractions thanks to the improved internal surface finish.
This hot end is suitable for plenty of MK8 nozzles. You can repair your extruder with this kit instead of replacing a new one when your extruder suffers a clog that can't be fixed.

Description

MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/40W
Material: Aluminum and Stainless Steel and Brass
Extra Nozzles: 7*0.4mm, 1*0.2mm, 1*0.3mm, 1*0.5mm
Extra Tube: 10x 30mm Length Extruder 1.75mm Tube

2. RepRap Champion 3D Printer MK7 MK8 Filament Extruder Feeder Kit for 1.75mm /w Driver Gear (Right Hand Version) for FlashForge Creator, Prusa i3 or other RepRap

Feature

Designed by Makerbot
Direct drive extruder feeder kit
Right hand version
Sharp and effective filament gear is included
Use it with NEMA 17 stepper motors

Description

High Quality Filament Extruder Feeder Kit, spring loaded for easy loading and unloading of filament. Makerbot designed kit includes grooved ball bearing, spring and fixing screws, stainless driver gear and stepper motor.

Please refer to supplied motor drawing/datasheet for motor data and cable pinout.

Package contents:

1 x Pre-assembled extruder kit (rigth side)
1 x Stainless filament drive gear for 5mm bore with set screw (NEMA 17 shaft)

3. RepRap Champion All Metal Upgrade Kit Direct Drive Extruder DIY for RepRap 3D printer Prusa i3. Right version.

Feature

Right Side Extruder Feeder
CNC machined and anodized aluminum alloy parts
Easy to Assemble. Link to assembly instructions is included
You can assemble both: direct feed or bowden extruder with this feeder
For 1.75mm Filament size only

Description

IMPORTANT: This right side extrder feeder version.

Depending on the type of extruder you are building using this kit, you might need different parts such as PC4-M6 tube fitting, 4mm OD 2mm ID Bowden Line PTFE tube, or M6 threaded hotend for direct feed extruder version.

Package contents:

1 x Aluminum main extruder body.
1 x Aluminum tension lever.
1 x Idler bearing for 1.75mm filament.
1 x Brass drive gear with 40 sharp teeth.
1 x High tension spring.
1 x Assembly screws.

4. 3D Printer Accessories V6 J-Head Hotend RepRap Extruder for 1.75mm Filament, Direct Feed or Bowden. w/ 0.4mm Nozzle, 12V fan, and 3ft PTFE Bowden Tube

Feature

3D printer hotend, Metal J-Head v6 compatible hotend for 1.75mm filament, w/ 0.4mm nozzle
Heatsink Shroud and high speed, 12V 0.13A cooling fan / NTC 3950 100K thermistors, w/ leads and dupont connector
12V 40W heater / 3ft long, 4mm OD 2mm ID PTFE bowden tube and quick connect fittings
Hot End can be used for: ABS, PLA, PETG, and most any other conventional print materials
This hot end can reach over 230C, for high temperature performance.

Description

This hot end is a replica of the newest, popular V6 hotend, this not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates typical hotend meltdown failures associated with other types of hotends. The latest hotend has a PTFE liner that slides inside the the upper portion of the heat brake, to help prevent misalignment of the filament, which is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
For Marlin firmware, under THERMAL SETTINGS -> #define TEMP_SENSOR_X (X being your extruder #) you should use # 11: 100k beta 3950 1% thermistor (4.7k pullup)

Specification:
Type: V6 J-head, can be used either as bowden or direct feed style
Thermistor: NTC 3950 100K (Marlin users should use Table 11 to define temp sensor)


Package contents:
1 x Metal J-Head hotend for 1.75mm w/ 0.4mm nozzle
1 x NTC 3950 100K Thermistor, with leads and dupont connector
1 x 12V 40W Heater
1 x Heatsink shroud with 12V 0.13A High Speed Cooling fan
1 x 3ft long, 4mm OD, 2mm ID, PTFE Bowden tube
2 x Quick connect straight fittings

Conclusion

All above are our suggestions for extruders 3d printer. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using extruders 3d printer with us by comment in this post. Thank you!