If you looking for edge finder .200 then you are right place. We are searching for the best edge finder .200 on the market and analyze these products to provide you the best choice.
Reviews
1. Brown & Sharpe 599-792-2 Edge Finder Single, 3/8" Shank x 0.200" Head Diameter
Feature
Locates round or flat work to within .0005" accuracySingle-end usability
Made from Hardness Rockwell C (HRC) 58-rated steel to help reduce wear and corrosion
Fully hardened and precision ground for usability
Rated up to 1,000 RPM
Description
The Brown & Sharpe 599-792-2 Edge Finder is made from Hardness Rockwell C (HRC) 58-rated steel for increased durability, and is fully hardened and precision ground. It features a 3/8 shank and 0.200 head diameter. It can locate round or flat work to within .0005 accuracy, and is rated up to 1,000 RPM. Single-end usability allows use on one end of the instrument. Place in a standard 1/2 diameter collet or chuck to use, and as it rotates and approaches the work edge, the head moves sideways approximately 1/32. The center of the finder is exactly half the head diameter away from the work.
Edge finders are used to accurately locate the edge of rotating work surfaces up to 1,000 RPM. The rotating instrument has a machine spindle that must come into contact with the spinning work surface for the tool to work.
Brown & Sharpe was founded in 1833, had a major part in setting industrial standards in the United States, and has given its name to several standards, including a tool spindle taper, a worm threadform, and others. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and has since focused on precision measuring equipment and metrology hand tools. The Brown & Sharpe line of coordinate measuring machines (CMMs), optical measuring systems, benchtop measuring machines, and precision hand tools offer consistent, high-quality design, construction, and performance. Brown & Sharpe has manufacturing facilities in North America, Switzerland, and China.
2. Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip
Feature
Used in a milling machine to find the workpiece edgeAll working surfaces are hardened and ground
Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line
Description
Mitutoyo Edge/Center Finder with 3/8" Shank Diameter, 0.200" Tip Diameter, and cone-shaped center finder.3. Mitutoyo 050102, Edge Finder, 1/2" Dia. Shank, .200" Dia. Tip
Feature
Used in a milling machine to find the workpiece edgeAll working surfaces are hardened and ground
Description
Mitutoyo Edge Finder, Shank Dia: 1/2", Tip Dia: .200".4. Brown & Sharpe 599-792-20 Audible Edge Finder, 3/8" Shank x 0.200" Head Diameter
Feature
Audible and visual measurement for increased accuracyGround for smoothness and case-hardened on the ends for usability
Available in multiple sizes for versatility
Made from Hardness Rockwell C (HRC) 58-rated steel to help reduce wear and corrosion
Heads are manufactured to within .0001" of stated size
Description
The Brown & Sharpe 599-792-20 Audible Edge Finder is made from Hardness Rockwell C (HRC) 58-rated steel for increased durability, and is ground for smoothness and case-hardened on the ends for usability. It features a 3/8 shank and 0.200 head diameter, and is available in multiple sizes. Heads are manufactured to within .0001 of stated size. Audible and visual measurement capabilities help increase accuracy.
Audible edge finders release an audible click when the tip jumps, allowing users to hear as well as see the tool, for increased accuracy. The rotating instrument has a machine spindle that must be turning for the tool to work.
Brown & Sharpe was founded in 1833, had a major part in setting industrial standards in the United States, and has given its name to several standards, including a tool spindle taper, a worm threadform, and others. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and has since focused on precision measuring equipment and metrology hand tools. The Brown & Sharpe line of coordinate measuring machines (CMMs), optical measuring systems, benchtop measuring machines, and precision hand tools offer consistent, high-quality design, construction, and performance. Brown & Sharpe has manufacturing facilities in North America, Switzerland, and China.
