When you looking for replicator 2x parts, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable replicator 2x parts is not an easy task. In this post, we show you how to find the right replicator 2x parts along with our top-rated reviews. Please check out our suggestions to find the best replicator 2x parts for you.
Reviews
1. Micro-Swiss HW-NOZ-MODMK8-04 Plated Brass Wear Resistant Nozzles , 1.75 mm, RepRap - M6 (E3D/Hexagon) 0.4 mm, Bright Nickel
Feature
USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials.Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance.
Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure.
Description
Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material.
Currently available in:
1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1.75mm & 2.85mm filament diameter in 0.4mm, 0.6mm & 0.8mm diameter orifices.
4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0.4mm & 0.6mm diameter orifices (ignore 0.2mm marking...long story) - 1.75mm filament only.
5. Afinia/UP!/Zortrax Style in 0.4mm & 1.75mm filament only.
Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0.4mm.
Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss.
contact Proto-pasta for more information.
2. Micro-Swiss HW-NOZ-MK10-04 Plated Brass Wear Resistant Nozzles , 1.75 mm, MK10 (Flash Forge/Dremel/Wanhao) 0.4 mm, Bright Nickel
Feature
USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials.Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance.
Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure.
Description
Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material.
Currently available in:
1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1.75mm & 2.85mm filament diameter in 0.4mm, 0.6mm & 0.8mm diameter orifices.
4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0.4mm & 0.6mm diameter orifices (ignore 0.2mm marking...long story) - 1.75mm filament only.
5. Afinia/UP!/Zortrax Style in 0.4mm & 1.75mm filament only.
Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0.4mm.
Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss.
contact Proto-pasta for more information.
3. Genuine E3D V6 All-Metal HotEnd 1.75mm Universal w/ Bowden Full Kit 12V (V6-175-B)
Feature
The v6 HotEnd Full Kit from E3D has been redesigned for your convenience from the ground up!This new hot end contains the same signature high temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments.
The v6 HotEnd allows you to print a wide variety of materials, from soft and flexible to sturdy and strong.
With High Temperature Performance, you can print with high-temp materials like Polycarbonate and Nylon
Basically, this design is really in-tune with all the elements, so your prints will come out crisp and accurate.
Description
The v6 HotEnd Full Kit from E3D has been redesigned for your convenience from the ground up! This new hot end contains the same signature high temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. The v6 HotEnd allows you to print a wide variety of materials, from soft and flexible to sturdy and strong. This is possible due to the PTFE (Polytetrafluoroethylene) liner tube through the hotend that you can extend into your extruder - this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments. This technology opens new doors for your 3D printing aspirations. With High Temperature Performance, you can print with high-temp materials like Polycarbonate and Nylon - this also eliminates HotEnd meltdown failures that are common with PTFE designs. Even though the v6 has a PTFE liner inside the hotend the liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating. Basically, this design is really in-tune with all the elements, so your prints will come out crisp and accurate. The v6 has cut back on a bunch of bulk. This clean-cut version's overall length is only 62mm, and there are significant reductions in the X/Y dimensions by using the new injection moulded fan duct. Are you eager to start printing right away? Good. So are we - and that's why here at MatterHackers we praise the v6 HotEnd. No adhesives, Kapton tape, or soldering is needed to get started. The new v6 simply locks into place with a little screw, high-temp glass sleeving is used to insulate the thermistor legs. This makes installing the hotend (as well as removing) a quick and smooth process compared to earlier methods involving various adhesives.The parts of the hotend just screw together, and the fan duct naturally clips in - this can be manipulated in different ways to suit your setup preference.4. Schark Parts 100743 SD Card for MakerBot Replicator 2 and 2X 3D Printer, 1GB
Feature
Works with MakerBot Replicator 1, 2 and 2XWon't give SD card errors
1GB Capacity
Guaranteed to work with MakerBot Replicators (4th Gen & earlier)
Will work with any 3D printer that uses SD cards
Description
Our 1GB SD card is guaranteed to work on the MakerBot Replicator 2 & 2X 3D printers. It arrives pre-formatted with plenty of space for your .x3g files. Have you had problems with other SD cards not working with your MakerBot 3D printers? This SD card is the solution. It will, of course, also work on any other 3D printer that uses SD cards.5. Schark Parts 100721 Flashforge CTC MakerBot Cooling Fan for Replicator 2/Replicator 2X, 40 mm, 24V
Feature
Perfect match for makerbot replicator 2 or 2XFront fan - 40 mm 24V 0.10a DC
Molex Connector fitted and ready to install
3D printer cooling fan - flashforge, ctc, makerbot, whanau
