If you looking for smartthings switch zooz then you are right place. We are searching for the best smartthings switch zooz on the market and analyze these products to provide you the best choice.
Reviews
1. Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More
Feature
POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave.POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption.
POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). Quick status reports to the controller and on/off state recovery after power failure.
POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14 - 104F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle.
COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and energy monitoring available for open systems only, including Vera, SmartThings (custom device handler required, contact seller first), HomeSeer, and Fibaro Home Center Lite.
2. Zooz Z-Wave Plus On Off Wall Switch ZEN21 (White) VER. 2.0, Works with Existing Regular 3-Way Switch
Feature
FAST Z-WAVE: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately).DIRECT 3-WAY SOLUTION: no add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present.
SMART SKILLS: Reports status instantly. Remembers and restores on/off status after power failure.
SIMPLY COMPATIBLE: Based on the universal binary switch command class - supported by most Z-Wave controllers. Z-Wave Plus certified > better range and communication speed.
QUICK INSTALLATION: Just tap the UPPER paddle 3 times while the hub is inclusion mode to add to your network. Follow wiring instructions carefully. NEUTRAL WIRE REQUIRED!
Description
- NOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances
- Model Number: ZEN21 V2
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC, 60 Hz
- Minimum Load: 15W for LED and CFL bulbs
- Maximum Loads: 960W Incandescent, 150W LED's and CFL's, 1800W (15A) Resistive
- Z-Wave Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
- Operating Temperature: 32-104 F (0-40 C)
- Installation and Use: Indoor only
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
- Wink
- Model Number: ZEN23 V2
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC, 60 Hz
- Minimum Load: 15W for LED and CFL bulbs
- Maximum Loads: 960W Incandescent, 1800W (15A) Resistive
- Z-Wave Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
- Operating Temperature: 32-104 F (0-40 C)
- Installation and Use: Indoor only
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
- Wink
- Model Number: ZEN24 VER 2.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC, 60 Hz
- Minimum Load: 15W for LED and CFL bulbs
- Maximum Loads: 500W single, 400W 2-gang, 300W 3-gang Incandescent, 150W CFL or LED
- Z-Wave Range: Up to 100 feet line of sight
- Operating Temperature: 32-104 F (0-40 C)
- Installation and Use: Indoor only
- Amazon Basic
- BROADA
- CMYK Edison Style
- CREE
- Ecosmart
- GE
- Halo
- Philips
- Sunco
- Sylvania
- Utilitech Recessed Dimmable LED's
- Utilitech Dimmable LED's
- Click the toggle up to turn on the light to the last brightness level. It takes around 3 seconds for the dimmer to reach full brightness. The ramp rate is not adjustable.
- Click the toggle down to turn off the light (with a fade-out effect and 3-second ramp rate).
- Press and hold the toggle up to add more brightness. Press and hold it down to reduce brightness.
- After power failure, the switch will automatically turn on to the last brightness level.
- In a 3-way installation, the slave (mechanical switch) can only turn the light on or off. The slave switch will always turn the light on only to the last brightness level. Dimming is only available from the master Zooz switch and your Z-Wave software.
NEUTRAL WIRE REQUIRED
- SPECIFICATIONS:
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to control this switch with Alexa.
Alexa-compatible Z-Wave hubs include:
3. Zooz Z-Wave Plus Smart Plug ZEN06 with 2 USB Charging Ports, White
Feature
SMART ON / OFF: Wireless control of floor lamps and small appliances (up to 15A >> do not connect heavy duty appliances like washers, dryers, fridges, do not connect chargers - use USB ports instead, do NOT connect transformers). Control and monitor devices remotely wherever you are. Z-WAVE HUB REQUIRED (sold separately).POWER MANAGER: Energy monitoring in live mode or over time (your Z-Wave hub needs to support this feature). 2 USB charging ports for your smartphone or tablet (no Z-Wave functionality). ETL certified for compliance with highest safety standards.
VISUAL ASSISTANT: LED indicator displays Z-Wave signal strength and power usage. You can also turn it off completely if your hub supports advance setting input (contact seller if you're not sure about this).
ENHANCED Z-WAVE: Improved 500 chip (Z-Wave Plus) for faster and safer wireless communication. Certification: ZC10-16085160. AES signal encryption for extra security. Auto-inclusion for hassle-free installation.
COMPATIBILITY: Advanced settings available for open Z-Wave controllers only: SmartThings (custom device handler needed, contact seller for info), Vera, ZipaTile, HomeSeer. On/off + energy monitoring for ADT Pulse and Almond. On/off functionality ONLY for selected alarm systems and Wink (contact seller for details).
Description
-Wireless control of floor lamps and small appliances -Energy monitoring in live mode or over time (your Z-Wave gateway needs to support this feature) -Scene inclusion for custom automation scenarios when included to a Z-Wave gateway controller -LED indicator displaying Z-Wave signal strength and power usage -Security enabled Z-Wave device with AES signal encryption (requires a security enabled gateway controller for full functionality) -Z-Wave Plus with improved 500 chip for faster and safer wireless communication -Built-in range extender for a stronger, more reliable network -2 USB charging ports for your smart phone or tablet (no Z-Wave functionality) -Built-in overload protection in Z-Wave outlet and USB ports SPECIFICATIONS Model Number: ZEN06 Z-Wave Signal Frequency: 908.42 MHz Power: 110V, 60Hz Maximum Load: 15A, 1800W USB Charging Port Power: 1A and 2.4A Operating Temperature: 14 - 104 F Range: Up to 130 feet line of sight Installation and Use: Indoor only Dimensions: 4" x 2.5" x 1.2" Weight: 7oz4. Zooz Z-Wave Plus Toggle On Off Wall Switch ZEN23 (White) VER. 2.0, Works with Existing Regular 3-Way Switch
Feature
FAST WIRELESS AND LOCAL CONTROL: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately). Reports status instantly.DIRECT 3-WAY SOLUTION: no add-on switch needed! Works with mechanical 3-way switches as long as NEUTRAL is present.
NEW VERSION: Short screws and neutral jumper INCLUDED. Remembers and restores on/off status after power failure.
WORKS WITH YOUR HUB! Based on the universal binary switch command class - supported by most Z-Wave controllers. Z-Wave Plus certified > better range and communication speed.
CHECK YOUR WIRING FIRST: Neutral wire is required to complete installation!
Description
- NOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances
NEUTRAL WIRE REQUIRED
- SPECIFICATIONS:
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to control this switch with Alexa.
Alexa-compatible Z-Wave hubs include:
5. ZOOZ Z-Wave 4-in-1 Sensor ZSE40 (motion / light / temperature / humidity)
Feature
4 smart sensors in 1 compact device.7 levels of motion sensitivity to choose from. 3 modes for motion / temp led indicator notifications
Built-in tamper protection. Low battery alerts.
Works great with VERA controllers. SmartThing users : please change device type to Aeon Labs multisensor Gen5
NOTE! This product is not supported by most Z-Wave alarm panels such as ADT Pulse or controllers such as Wink which do not support multi-level command class. Please check with your hub's support to make sure this product will be recognized by their software correctly.
Description
Model Number: ZSE40 Z-Wave Signal Frequency: 908.42 MHz Power: 2 AAA batteries Range: Up to 100 feet line of sight Operating Temperature: 5 - 104 F Installation and Use: Indoor only In the box: 4-in-1 sensor, 2 AAA batteries, mounting hardware6. Zooz Z-Wave Plus Toggle Dimmer Light Switch ZEN24 VER 2.0 (White), Works with Existing Mechanical 3-Way Switch
Feature
Manual or remote on/off and dimming control from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately). Reports status instantly!Direct 3-way Solution: no add-on switch needed! Works with mechanical 3-way switches as long as NEUTRAL is present. On/off only from the slave switch (dim lights from ZEN24 or your Z-Wave hub)
NEW! Improved dimming capability for LED bulbs (scroll down for details, NOT compatible with Luminus bulbs).
NEW VERSION: Short screws and neutral jumper INCLUDED. Remembers and restores on/off/brightness status after power failure.
Neutral wire required! Z-Wave Plus certified > better range and communication speed. UL certified.
Description
- NOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances. Use with lighting only.
NEUTRAL WIRE REQUIRED
- SPECIFICATIONS:
Will it dim my bulbs?
You'll be able to adjust brightness levels between 10% and 100% (with full on/off capability) for the following popular dimmable LED bulbs:
Manual Operation:
