When you looking for flasher relay 12v, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable flasher relay 12v is not an easy task. In this post, we show you how to find the right flasher relay 12v along with our top-rated reviews. Please check out our suggestions to find the best flasher relay 12v for you.
Reviews
1. CEC Industries EF32 Electronic Turn Signal Flasher Relay, Round, 2 Prongs, 12 Volts
Feature
Type: ElectronicPilot Circuit: No
Prongs: 2
LED Compatible: No
Description
Round, 2-Prong Electronic Flasher, replaces 552 or 536 flasher in most applications. Since the timing is electronically controlled, this flasher will flash at a constant rate, rather than depending on the load. For use with incandescent (regular) bulbs. If you need an LED-compatible flasher, please use model EF32RLNP instead.2. CEC Industries EF30AL Electronic Wig-Wag Alternating Flasher Relay, LED Compatible, 3 + Ground Wire Prongs, 12 Volts
Feature
Type: Electronic (Wig Wag)Pilot Circuit: No
Prongs: 3 + Ground Wire
LED Compatible: Yes
Description
3-Prong LED-compatible Wig Wag Flasher
This flasher has 3 prongs.The prong marked must be connected to the 12 Volt (battery) through a switch, the other two prongs are connected to the bulbs.
It can be used with LED bulbs and/or regular incandescent bulbs.
IMPORTANT #1: It is important that the X prong be wired to +12 Volts through a switch. If you don't, it will click and flash your lights ALL THE TIME
IMPORTANT #2: If your vehicle is wired for a "regular" flasher, you cannot simply plug in an alternating flasher and expect it to alternativey flash front and rear, or left and right. If that's what you're looking for, additional wiring is required.
Replaces
Carquest FSHEF30A
Please review the specifications for suitable wiring harness.
3. CEC Industries EF32RL Electronic Turn Signal Flasher Relay, LED Compatible, 2 + Ground Wire Prongs, 12 Volts
Feature
Type: ElectronicPilot Circuit: No
Prongs: 2 + Ground Wire
LED Compatible: Yes
DOT Approved
Description
The EF32RL is an LED compatible 2-prong turn-signal flasher relay.The flasher will resolve the problem with hyper-flashing or no-flashing when you replace your stock incandescent bulbs with LED bulbs
The following features set this item apart from other LED flashers
- Works with LED bulbs AND regular bulbs, or a mix.
- Handles up to 25 Amp, so no worries when towing a trailer that has non-LED bulbs (many cheap LED flashers will burn out if you use regular bulbs)
- Audible Clicking Noise
- Constant Flash Rate, regardless of the type or number of bulbs
- DOT Approved
- Unparalleled Reliability
Installation is very simple: Remove existing 2-prong flasher, plug in EF32RL and connect the flasher's black wire to a good ground (chassis / sheet metal or other ground).
This flasher is designed for vehicles that use a 2-prong flasher with a socket wired to SAE specifications. Some vehicles are not wired correctly at the flasher socket. If you are not sure, please review the images on how to determine how your socket is wired, or read up on www.ef32rl.com, or simply order the EF32RLNP which will work regardless of how the socket is wired
4. uxcell® Car Vehicle 3 Pin LED Turn Blinker Light Flasher Relay 12V DC 0.02-20A
Feature
Product Name : LED Flasher;External Material : Plastic, MetalColor : Black;Flasher : Voltage: 12V DCCurrent; 0.02-20A
Terminals Number : 3 Terminals;Size : 30 x 30 x 30mm/1.2" x 1.2" x 1.2" (L*W*H)
Weight : 25g
Package Content : 1 x LED Flasher
Description
This is a 3 Terminals DC 12V LED Flasher Relay. Suitable for Turn Signal, Blinker Light.This will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard.
5. TOOGOO(R) Turn Signal Flasher Blinker Relay 12V 2 Pin for Motorcycle LED Indicator Light
Feature
Brand new & high qualityFix flash rate problem
Each indicator needs one unit
It's compatible with 12V motorcycle bike
Please ask help from professional before fitting
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.TOOGOO(R) Turn Signal Flasher Blinker Relay 12V 2 Pin for Motorcycle LED Indicator Light
2 pin relay
Voltage: 12V
With built-in resistor
1 x Relay
1 x User manual
6. 3 PIN Square 12 Volt CF13 Load Resistor Electronic Flasher Relay Fix For LED Turn Signal Light Bulbs
Feature
US Local Fast Shipping & 100% Brand New & Guarantee High Quality.3 PIN Electronic LED Flasher Relay will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard.
Operates at 12V has a easy plug-n-play installation.
Electronic LED Flasher Relay will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard.
Please check your user manual to make sure the Terminal Quantity before order. Offer Perfect Aftermarket Replacement if any product problem.
Description
Specifications:Condition: 100% Brand New & High Quality.
Important Note:
Please Read All Description and Fitment Before Ordering the Product.
This CF13 (aka EP34) is an electronic turn signal flasher that operates at 12V. This LED flasher is an application specific flasher that is designed for various Acura, BMW, Cadillac, Chevrolet, Daihatsu, Dodge, Eagle, Ford, Geo, GMC, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Lincoln, Mercury, Mitsubishi, Nissan, Plymouth, Subaru and Suzuki vehicles from 1975 to 2007 with a simple plug and play installation.
Please note that this LED flash will only fix the LED bulb's hyper flash issue, not the wattage lower than stock bulb related "bulb out" warning message on dashboard.
Item will be shipped from USA Local Warehouse and you will get it soon.
Please contact us to resolve any issues before leaving any neutral or negative feedback. Good Communication will be more appreciated,thanks for your support in advance.
7. CEC Industries EF32SS-R Turn Signal Flasher Relay, LED Compatible, 2 Prongs, 12 Volts
Feature
Type: Solid State (no click)Pilot Circuit: No
Prongs: 2
LED Compatible: Yes
Description
This 2-prong solid-state flasher has no moving parts inside, for virtually unlimited life. Unlike many other solid state flashers, this flasher has a 25A switching capacity, so it can be used with LED bulbs, regular bulbs or a mix.IMPORTANT: Since this is a SOLID STATE flasher, it does NOT make a clicking noise. Also, since this is an electronic flasher, the polarity (wiring) of the flasher socket is important: The flasher expects +12V at the X-terminal and the lights (turn-signal switch) at the L-terminal. If the unit does not flash the lights when inserted into the socket, a reversal harness (2 pieces of wire with spade connectors) is required, these can be made DIY or purchased (part number EF2C)
8. 12V Heavy Duty 2 Pin LED Compatible Electronic Fixed Flasher Turn Signal Flasher Relay
Feature
This is a heavy duty 2 PIN 12V electronic signal flasher (blinker) relay that is a plug and play design. Maybe a resistor are required to use for the LED bulbs.Fixed blinker speed and great for led tail lights.It can fit for many cars and universal.
Sub Type: Hazard Warning Flasher, Hazard Warning and Turn Signal Flasher.
MAX 20 AMPS & Voltage: 11-15 volts & Product Dimensions 2.3 x 1.4 x 1.3 inches
If you are upgrading to LED tail lamps of turn signal lights, this is a must have item. Local parts stores carry this product for around $16-$20. Buy it here and save money!
Description
Sub Type: Hazard Warning Flasher, Hazard Warning and Turn Signal Flasher.These flashers retain the reliability of an flasher along with staying extra cool, consuming very little power and extra long lasting life.
The flasher will resolve the problem with hyper-flashing or no-flashing when you replace your stock incandescent bulbs with LED bulbs.
CAUTION: Maybe a resistor are required to use for the LED bulbs.
The following features set this item apart from other LED flashers.
Works with LED bulbs AND regular bulbs, or a mix.
Handles up to 20 Amp, so no worries when towing a trailer that has non-LED bulbs (many cheap LED flashers will burn out if you use regular bulbs)
Audible Clicking Noise.
Constant Flash Rate, regardless of the type or number of bulbs.
DOT Approved.
Unparalleled Reliability.
Installation is very simple
This flasher is designed for vehicles that use a 2-prong flasher with a socket wired to SAE specifications. Some vehicles are not wired correctly at the flasher socket. If you are not sure, please review the images on how to determine how your socket is wired.
It can fit for many cars and universal.
1993-1999 Chevrolet C1500
1996 Chrysler LHS
1988-1993 Ford F-150
Dodge
Cadillac
Chevrolet
GMC
Buick
Pontiac
Renault
Subaru
Ideal
Jeep
Lincoln
Mazda
Mitsubishi
Nissan
Oldsmobile
Honda
Please review the specifications before buying.
